Month: December 2023

Celebrating A 9th Birthday

| ullycatdesigns

Growing a year older should be celebrated. This show-stopper card is for a 9-year-old.

For this card I used two new dies from Karen Burniston’s December 2023 release – Birthday Candle Add-Ons and the Topper Tags – as well as her Fancy Label Accordion, Fancy Winter Frames, and a few other previously released die sets to decorate.

Before starting, watch assembly videos for the linked die sets. The videos are towards the bottom of the linked pages.

Accordion Frames: Cut four accordion frames using the Fancy Label Accordion die set. They will be decorated AND THEN assembled. It is much harder to decorate a fully assembled accordion card when you cannot flatten the various moving panels and frames. (I assembled this card as I would normally, but the candle and heart add-ons are designed to be assembled with with the accordion frame behind the add-on panel and not as I did by putting the frame’s center post in front of the panel.)

Candles Add-Ons: The Birthday Candles Add-On cut a pivot panel that attaches to two Fancy Label Accordion panels. It also has dies to cut and stencil four candles and their flames. Cut one candle panel from a solid color cardstock. Cut another from decorative paper. Train the folds on the solid color panel as directed on the packaging. Using the largest decorator label from the Fancy Label Accordion set, cut a frame from the decorative paper. (The section between the two label cut outs will fall out and the frame can be cut down the center fold.) Glue the frame onto the panel matching up the edges.

Assemble and decorate the candles using the die stenciling feature or use decorative papers. (Because I needed to celebrate a 9-year-old’s birthday, I did not use all twelve candles that the panel will hold. I decided to add a number 9 as another candle by cutting a “9” using the Numbers die set and cut the top of a candle with the flame attached to the back top of the number.) The flames I cut from a background paper I had made using glitter ink and drew the black burnt wick onto them.

Once the panel is fully decorated, work on the accordion frames that it will be glued onto. Glue two frames together using the outer long tab. From one panel cut the label panel along the pivot point making sure to keep the label attached to the pivot bar. Cut the other label, but the cut will look different than the other panel. See photo below. Add glue to the back side of the candle panel and attach it to one of the label panels. Add glue to the other end of the candle panel and attach it to the other label panel. (See 2nd photo under tags for what the back side of the attached candles panel into the accordion frames.)

Tags: Cut two tags using the second from the smallest tag die in the Topper Tags. (If your paper is a single-sided decorative paper like mine was, cut two more tags that cover at least the part of the tag that will not be covered by the fancy label panel. Glue the tags together as shown in the photo below.) Attach the back of the tags to the fancy label panels on their backsides.

Decorations: The Birthday Charms die set are used for balloons, party hats and cupcake. Three colors of bakers twine are used for the balloon strings and for tag ties. A thin black pen was used to draw the balloon strings onto card back. The frame borders are cut from white copier paper backed with a wide double-sided tape using the polka-dot frame die from the Fancy Winter Frames.

Once the frame borders are adhered, attach the end accordion frames to the candle frames. Add balloons to the folds and then glue the fancy labels together.

Sentiments: Add the sentiments once the accordion frames and fancy labels are all attached together. “Happy Birthday” uses two dies – Happy Birthday Shadow and Happy Birthday. “Just for You” uses three die sets – Word Set 15, Word Set 8 and Mini Alphabet. The “You” is cut from a phrase die and its shadow is created by tracing the outside of the die and fussy cutting. (You could use other word dies for the “You.”)

Envelope: The closed card fits into an A7 (5×7-inch) envelope.

Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊

Materials Used:

Dies

Papers

  • Violet Studio Designs – 8×8 Single-Sided Paper Pad – Hoppy Easter
  • Yellow 110lb. Cardstock
  • Blues, White and Cream Cardstock
  • White Copier Paper

Ink

  • Sharpie – Permanent Marker – Ultra Fine Tip – Black
  • Sharpie – Permanent Marker –Fine Tip – Blue. Green, Orange and Yellow
  • Pigma – Mircon 01 Fine Tip Pen – Black
  • Gel Pens – Multiple Colors
  • Sakura – Gelly Roll Pen – Medium – White
  • Spectrum Noir – Sparkle Glitter Ink – Candlelight

Adhesives

Tools

Miscellaneous

  • Three Colors of Bakers Twine

Naughty or Nice?

| ullycatdesigns

It’s the Karen Burniston design team challenge for December 2023 with the theme of “Naughty or Nice” using Christmas stockings and the idea that naughty persons get coal in their stockings while people who have been good/nice will get presents and sweet treats in their stockings.

While I used Karen’s Fireplace Pop-Up and Fireplace Extras 1 dies I did not make it a pop-up, but I did have Santa’s boots swing in the fireplace.  Inside, two greenery wreaths pop-up using the Twist Flower Pop-up and Crosshatch Circles, Christmas Borders 2, Holiday Charms, Big Birthday Charms, Adirondack Chair Pop-Up and Small Script – Christmas were used for decorations and sentiments.

Before starting, I recommend watching the assembly videos of the pop-ups which are usually near the bottom of the linked pages for the various dies used.

Cardbase: I folded a 7 3/4-inch by 8 3/4-inch rectangle of white cardstock long-wise in half for the cardbase. Because my decorative papers were 4 1/2-inch by 6 1/2-inch, I centered the papers on each of the four panels.

Fireplace: The fireplace main piece was cut using white ink rubbed on the die before cutting. The mantel piece was die cut and folded in half and glued together to add dimension. Christmas decorations – candles, stockings, greenery, bows, fireplace guard and tools are all in the Fireplace Extras 1 set. I cut down the pail from the Adirondack Chair Pop-Up set to be a coal shuttle next to the fireplace. For the picture of Father Christmas, I fussy cut it from the decorative paper collection I used.

Santa’s Boots: The boots are cut from black and white cardstock using the dies in the Fireplace Pop-Up set. Use the tab atop the boots to attach red pants that were cut free-handed with a holed punched and widened to accommodate a small foam dot. The boots were coated with glitter gloss before attaching to the card. Follow the pictures above for order of assembly of fireplace and Santa’s pants and boots. The fireplace was attached with two layers of foam tape to be slightly taller than the foam dot so that the boots would swing freely.

Wreaths: Using the second largest crosshatch circle, I cut two from heavy white paper. The greenery was made by cutting off the fir needles from the branch piece in the Holiday Charms set. Stockings and their coal, teddy bear and candy cane come from the same charms set. The wrapped gift is from the Big Birthday Charms set.

Inside Pop-Up Mechanism: I added extension arms onto the Twist Flower Pop-up mechanism to form a “W” shape. (Watch this Halloween card video to see how to make the mechanism.) The circle wreaths were folded in half and glued to the two “V” arms, playing with the positioning of the circles so there are no catchpoints.

Borders: The inside border of candy canes comes from the Christmas Borders 2 die set while the coal comes from the Holiday Charms. For the back borders, the branch die from the Holiday Charms set was used. Leftover strips of decorative papers were added to the card front as borders.

Sentiments: Clear tape over red cardstock is the secret to the glossy script letters with plain white cardstock shadows. The sentiments all come from the Small Script – Christmas die set. On the front is “ho ho ho” with “Christmas greetings” inside the card.

Envelope: The stocking border from the Christmas Borders 2 set was cut from the same striped paper that was used on the fireplace stockings and glued to the back envelope flap to hint at what’s to come.

Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊

Materials Used:

Dies

Papers

  • The Paper Studio – 4.5in x 6.5in Single-Sided Textured Paper Pad – Old World Winter
  • Bazzill – 8.5×11 Embossed Polka Dots – Phoenix
  • My Colors – 12×12 Textured Metallic Cardstock – Black Bear
  • White and Black Cardstock
  • #10 Business Envelope

Ink

  • Craft Smart – White Ink Mini Cube
  • Sharpie – Permanent Marker – Ultra Fine Tip – Red, Orange and Yellow
  • Pigma – Mircon 01 Fine Tip Pen – Black
  • Sakura – Gelly Roll Pen – Medium – White
  • Nuvo – Aqua Shimmer – Glitter Gloss

Adhesives

Tools

  • Die Cutting Machine
  • We R Memories – QuickStick
  • We R Memories – Scoring Board and Trimmer
  • Craft Mat
  • Scissors
  • Hole Punch – 1/4-inch
  • Clamping Reverse Tweezers

Sneak Peek – Bag and Box It Up!

| ullycatdesigns

It’s the start of SNEAK PEEK Week for Karen Burniston’s December 2023 Release. Today we’ll focus on the Mini Gift Bag and the Candy Heart Box die sets.

These bags and boxes go together quickly and have two main surfaces that allow for creative decorations. It doesn’t matter whether you use solid colored cardstock or decorative patterned papers, the bags are great fun for tucking in gift cards and other small items like jewelry, small toys, car keys, candy, or crafting supplies.

12 Days of Christmas Gift Tree
Valentine’s Day Candy Hearts Box and Mini Gift Bag – both fit a gift card
Tag Card with Mini Gift Bag to hold a gift card

Look for tutorials on these projects in the coming weeks.

Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊

Drop-Down Oven Door Card

| ullycatdesigns

This card was inspired by Craft Roulette episode #191 whose parameters were a drop-down card, supper table colors, seasons element (Christmas), and shiny.

It also takes inspiration from Karen Burniston’s Oven Pop-Up.

It uses the Mini Pops-Pop-Up tiered platform die by Karen Burniston, Gingerbread Pals stamps by Kindred Stamps and Nested Rounded Corners Square Small Stitched dies by Rubbernecker Stamps.

Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊

Materials Used:

Dies

Stamps

  • Kindred Stamps – Clear Stamps – Gingerbread Pals

Papers

  • White and Red Cardstock
  • Bazzill – 8.5×11 Textured Cardstock – Tiara -18-1002
  • Silver Foil Cardstock
  • Grafix – 8.5×11 Acetate .0075 – Clear

Ink & Embossing Powder

  • Simon Says Stamp – Premium Pigment Ink – White
  • Hero Arts – Embossing Powder – White
  • Pigma – Mircon 01 Fine Tip Pen – Black

Adhesives

Tools

  • Die Cutting Machine
  • Scissors
  • Bone Folder
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Cloth
  • Kat Scrappiness – Anti-Static Tool
  • Heat Tool

Miscellaneous

  • Nuvo – Jewel Drops – Holly Berries
  • Nuvo – Crystal Drops – Gloss- Berry Blue
  • Nuvo – Crystal Drops – Gloss- Ebony Black
  • Scrapbook.com – Pops of Color – Gloss- Sunshine