Cardbase: Cut an 11x 6-inches rectangle of lightweight cardstock and fold in half to create a 5 1/2 x 6-inches card base with a side fold. Cover with decorative paper on the outside and inside of front panel before cutting with largest square die from the Squares – Crosshatch. Once the square has been cut, attach inside back decorative paper matching front design.
Accordion Frame: Die-cut two Fancy Label Accordion frames from a decorative print cardstock as directed in PDF instructions. Make sure you add the decorative label die inside the pivot panel before you die cut, so that you will make the pivot panel into a frame.
Attach to card base as directed in PDF instructions. Use tree trunk and hearts dies to decorate tree panel.
Tree-Add-On Panel: Replace the Trees Add-Ons for the Hearts Add-Ons in the PDF instructions. I cut out tree frames on the first and third panels by first die cutting the whole panel and then die cutting twice more with the cloud shaped tree leaves dies and tree trunk dies in the Trees Add-Onsset. I cut two more of the tree shaped frames to cover and reinforce the back side of the tree panel.
Attach to pivot panel and card as shown in PDF instructions.
Sentiments & Decorations: I used printed sentiments and border strips from the paper collection to finish decorating the card covering all of the green cardbase.
Envelope: Fits into a 6×9 catalog envelope with a back flap decorated with decorative paper strip.
It’s the Karen Burniston design team challenge for February 2024 using the theme of “Oh My Hearts.”
For this challenge I chose to make some mini valentines that fit into a Candy Hearts Box.
Box: Review the assembly directions on the back of the packaging for the Candy Hearts Box. I used thin double-sided tape to assemble the box. Adhesive sequins were added to the hot air balloon printed on the cardstock. Three hearts were cut from all the hearts without words in the die set from coordinating papers. The top two hearts were attached with a strip of double-sided tape and the sides folded up. Two adhesive backed sequins were glued to the center of the hearts.
Ice Cream Card: A 2-inch by 6-inch rectangle was cut from decorative cardstock and folded in-half for a 2×3-inches top fold card. The inside of the card was covered with decorative cardstock. A second piece 3-inch by 5-inch rectangle of matching cardstock was folded in half and the tiered platform pop-up from the Mini Pops die set was used to cut in to the 3×5 rectangle following theassembly video at the bottom of the link page. Train the main platform’s folds and then center over the top fold card and glue down. Trim excess platform cardstock from edges of card.
Cut the scoop of ice cream from the Sweet Treats Charms set and color in the sprinkles with pens. Cut the silver dish from the bottom of the trophy in the Treasure Charms.
Cut candy hearts with messages using the dies in the Candy Hearts Box set. I cut free-handed the two tiny spoons from silver mirror cardstock. Adhere ice cream assembly to top tier of platform.
Spiral Hearts Card: A 2-inch by 6-inch rectangle was cut from decorative cardstock and folded in-half for a 2×3-inches top fold card. The inside of the card was covered with decorative cardstock. The spiral platform is from the Mini Pops die set and cut from white shimmer cardstock. Follow directions in theassembly video at the bottom of the link page or on back of the packaging for attaching the spiral. Add three sizes of hearts cut from the Candy Hearts Box set and glue to spiral platform. I had leftover hearts and labels from an Easter box project that I used to decorate the card.
Twist Panel Card: A 2-inch by 6-inch rectangle was cut from decorative cardstock and folded in-half for a 2×3-inches top fold card. The inside of the card was covered with decorative cardstock. Using the same patterned cardstock used inside the card, cut one twist panel mechanism using the Little Twist Panel Pop-Up die set. Cut the panel strip and the two banner halves from decorative paper. Follow directions in the assembly video at the bottom of the linked page or on back of the packaging to attach the twist mechanism, panel and banner. Trim the excess paper from edges of card before decorating. The banner ends may need to be trimmed back to fit into the card. Add hearts and check the positioning by closing the card while glue is still wet. I used the tiny heart in the Office Charms die set to decorate, but you could use other tiny hearts from other die sets.
The three cards easily fit into the candy box for a boxed set of mini-Valentines.
_____________________________________________
Thank you for reading this blog post. I hope this inspires you and makes you smile. 😊
This card was made for Craft Roulette #201 whose parameters included an easel card, quiet colors, sweets element and bokeh.
Cardbase: Cut one rectangle 3 3/4x 8 1/2-inches from heavy white cardstock. Cut a second white rectangle 3 3/4x 8 3/4-inches. On the largest rectangle score at 1/4 inch at one end and 3-inches at the opposite end. (The 1/4-inch is the tab folded under as the card hinge to card back. The 3-inch tab is the ease for the paper doll.)
Thank you for reading this blog post and watching the video. I hope this inspires you and makes you smile. Please like and leave comments 😊
Materials Used:
Dies
Karen Burniston in cahoots with Riley and Company – Hello – 1166
Karen Burniston in cahoots with Riley and Company – You’re Sweet – 1087
Karen Burniston in cahoots with Riley and Company – Ice Cream Sundae Pop-Up – 1082
Studio Light – Misses Dies & Stamps by Karin Joan – Betty
Studio Light – Misses Dies & Stamps by Karin Joan – Tasha
Stamps
Studio Light – Misses Dies & Stamps by Karin Joan – Betty
Studio Light – Misses Dies & Stamps by Karin Joan – Tasha
Papers
PhotoPlay – 12×12 Double-Sided Cardstock Collection Pack by Becky Moore – Snail Mail
This Valentine was made for Craft Roulette #200 whose parameters included kid’s card, brrrr colors, comic or cartoon element and button(s).
I have had a Peanuts collection of stamps, coordinating dies along with papers and washi tape sheets from Craftstash for a few months and thought the comic parameter was a perfect use of them.
Snoopy has such a cute button nose and the papers have some icy blues. Because a kid’s card needs some interactivity, I used a wiper mechanism by i-crafter to make Snoopy smooch Lucy. The sentiments are all computer generated.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
Celebrating Valentine’s Day often brings up visions of candy hearts and chocolate. This is a special display style Valentine card with coordinating candy hearts box and mini gift bag with a ladybug theme.
Before starting, watch assembly videos for the linked die sets. The videos are towards the bottom of the linked pages.
Accordion Frames: Cut four accordion frames using the Fancy Label Accordion die set. They will be decorated AND THEN they will be assembled. It is much harder to decorate a fully assembled accordion card when you cannot flatten the various moving panels and frames.
Hearts Add-Ons: The Hearts Add-On cut a pivot panel that attaches to two Fancy Label Accordion panels. It also has dies to cut decorative hearts in three sizes. Cur one hearts panel from a double-sided decorative paper. Train the folds on the panel as directed on the packaging. Decorate the heart panels on the front and back sides.
Once the panel is fully decorated, work on the accordion frames that it will be glued onto. Glue two frames together using the outer long tab. From one panel cut the label panel along the pivot point making sure to keep the label attached to the pivot bar. Cut the other label, but the cut will look different than the other panel. See photo below. Add glue to the back side of the hearts panel and attach it to one of the label panels. Add glue to the other end of the hearts panel and attach it to the other label panel. (I die-cut one pivot panel from ladybug paper to go over the back of the pivot panels as a decorative feature and to cover over the tabs from the other panels.)
End Frames: Cut two of the largest decorative labels from the Fancy Label Accordion set for use on the end frame panels. Using the stitched heart die from the Candy Heart Box, cut hearts out of the labels. Add labels to the end frame panels. Once the end frames are decorated, attach the end accordion frames to the center hearts frames. Cut off unused tab from accordion panel and glue over contrasting tab on back of card. Cut another tab to cover other contrasting tab. Glue the fancy labels together. (I die-cut one pivot panel from ladybug paper to go over the back of the pivot panels as a decorative feature and to cover over the tabs from the other panels.)
Sentiments: “Happy Valentine’s Day!” is made by cutting the shadow from white cardstock and using contrasting patterned paper for the words. The space for a personal message is on the right back panel and it uses the second largest label with dotted edge in the Fancy Label Accordion set.
Box: The Candy Heart Box is cut in one piece from double-sided decorative paper. Before the box is assembled, a large heart needs to be cut out of the front of the box. Using double-sided tape, adhere a piece of clear acetate or plastic to the inside of the box over the opening. Assemble the box as directed on packaging. (I used glue to assemble the box.) Decorate with hearts and add a scalloped white square folded over for a personal message.
Bag: (Watch assembly video) Using coordinating decorative paper, cut the two Mini Gift Bag pieces and assemble as directed on the packaging. (I used glue to assemble the bag.) Add ribbon or pom-pom string for handles. Decorate with leftover hearts from other pieces in the set.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
For my card I chose a Valentine theme using excerpts Edward Lear’s 1870 poem “The Owl and The Pussy-cat.” The action in this card comes as a wave lifting the pea-green boat up in the sea near the edge of the sand.
Cardbase: I used a purchased 5×7-inch (A7) white cardbase and covered the front and back panels with decorative blue sea patterned cardstock cut using the largest crosshatch rectangle in the Rectangles and Labels – Crosshatch set. Inside, I cut a 5×7 rectangle out of my one sheet of wave paper making the angle of the waves to match the angle of the raising platform base. From the scraps of wave paper, I pieced out the other inside panel leaving the bottom right corner without waves. I cut a sandy beach from patterned paper to cover the right corner. The edges of the beach were inked with blue ink and sea foam was added using a textured white paint. Trim off excess decorative paper from the card edges.
Raising Platform:(Watch the assembly video before starting.) From blue sea patterned paper cut, using the Raising Platform Pop-Up set, the “L” shaped mechanism piece, the largest label and a strip 1/4-inch by 2 1/2-inches. (Save the strip for use under the Boat section.)
(If your mechanism is cut from a one-sided patterned paper, cut a coordinating blue-green pattern paper cut two of each of the decorative diamond-shaped panels to cover the inside of the mechanism that is visible when assembled.)
Attach to inside of the card base as shown in assembly video/package instructions. Add waves cut from blue-green patterned cardstock using a die from the Tropical Scene set to the mechanism base making sure they don’t have catchpoints.
Owl: (Watch the assembly video before starting.) Cut two owls from brown, a triangle beak and a set of feet from yellow, one set of eyes from black and one oval from white using the Feathered Animals set. Glue white oval to back of one owl piece and attach black eyes. Add white dots to eyes as shown on packaging. Glue back owl piece to front and glue in the brown eye circles to back of head. Using the owl die, stencil on the feathers and wings to front and back of owl.
Cat: (Watch the assembly video before starting.) Cut two cats and two collars using the Cat and Dog set. Using die, stencil face on to one cat piece. Trim tag off one collar and glue to back cat piece and tagged collar to front cat piece. (I used markers and glitter brushes to color the collar.) Glue the green tab cut from scrap green cardstock used for the boat to the back side of one cat piece and then glue the other piece sandwiching the tabbed piece in between.
Boat: The boat is made by trimming off the two arm sections of the Raising Platform Pop-Up “L” shaped mechanism. (See photo for white sections to keep.) Train all the folds in the two pieces. Glue the tab to the inside of each piece to form the pointed front and back of the boat. Place one piece inside the other piece so that the untabbed tip of one piece points into the base point of the other and fold the sides to form a triangle. (See photo of inside of boat for folds.) Repeat with other piece. Glue the two pieces together making sure the boat is long enough to hold the cat and owl pieces.
Take the strip 1/4-inch by 2 1/2-inches cut in the Raising Platform section and fold in half. Fold again a 1/2-inch from the center fold and then 3/4-inch from the center fold. Repeat on the other side of the fold. (If using a one-sided patterned cardstock, cut 1/2-inch strips to cover the two ends that will show when assembled.) glue strip to bottom of boat as shown in photo.
Cut two more of the boat pieces for the inside of the boat. Trim off tabs and cut down the center fold to form diamond shapes. Glue in the cat and the owl inside the boat using their green tabs. Glue green boat diamonds inside the boat covering the animals’ tabs. Trim off excess patterned paper as needed along boat top edges.
Fold strip on bottom of boat form a cradle that the boat sets on when placed on raising platform . Adjust strip’s folds as needed. Glue cradle to platform.
Train boat and platform to close properly.
Sentiments: I used computer generated sentiments sized to be cut using dies in the Rectangles and Labels – Crosshatch set. I aged the pieces that were printed on cream cardstock by roughing-up the edges with a distress tool (knife sharpener) and crumpling the pieces and inking with yellow, brown and blue inks. On the inside sentiment I stamped in yellow a crescent moon in the clouds and on the front sentiment shooting stars in the corners. Tiny iridescent star confetti were glued randomly on the sentiments. On the card back credit is given to Edward Lear for the poem excerpts.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
Needing something cute to put a gift card in with a winter theme, I quickly created this mini gift bag with a polar bear holding a heart.
Karen Burniston’s December 2023 release includes the Mini Gift Bag die set that makes a collapsing bag that will hold a gift card and fit in the palm of your hand.
If you use a patterned paper that doesn’t have a design with a distinct up and down to it, you can cut the entire bag from a 6×6 piece of paper.
I use red vellum to cut a heart with the heart die in the set. The bear is from the Winter Animals set and the tiny heart he holds comes from the Safari Animals sets.
For the bag handles, I used 1/4-inch wide organza ribbon tied as a loop for each side with the knots hidden inside the bag.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
It’s the start of SNEAK PEEK Week for Karen Burniston’s December 2023 Release. Today we’ll focus on the Mini Gift Bag and the Candy Heart Box die sets.
These bags and boxes go together quickly and have two main surfaces that allow for creative decorations. It doesn’t matter whether you use solid colored cardstock or decorative patterned papers, the bags are great fun for tucking in gift cards and other small items like jewelry, small toys, car keys, candy, or crafting supplies.
12 Days of Christmas Gift Tree
Valentine’s Day Candy Hearts Box and Mini Gift Bag – both fit a gift card
Tag Card with Mini Gift Bag to hold a gift card
Look for tutorials on these projects in the coming weeks.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
Ully Cat's World 