Here is a quick summary of cards using the new Karen Burniston Whirly Wheel die set.
(HINT: Click on the photo to go to the tutorial on how to make it.)
________________________
Thank you for experiencing this blog post.
I hope this inspires you and makes you smile.
Please like and leave comments π
________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
Itβs Sneak Peek Week for Karen Burnistonβs June 2025 release of ten new dies and five new clear stamps. For this interactive popping-up space alien birthday card I used the new Whirly Wheel die set.
Watch the process video to see how I made this card.
Cardbase: For the finished 5×7 side-fold card, I started with a pre-folded clear acetate (plastic) A7 (5×7-inch) card base and cut one 5.125×7.125-inch rectangle from gray cardstock, another 5.125×7.125-inch rectangle from bluish silver mirror cardstock. And finally, the card back of two pieces of heavy black cardstock -one 5.5 x7.125-inches and the other is cut using the second largest die (4.2×6.2-inches) in the Rectangles and Labels -Crosshatchdie set for a mat. Watch the video above to see how I assembled the card from these pieces. Windows in card front were cut using the third and fourth smallest dies in the Oval – Crosshatch die set.
Space Background Panels: The space backgrounds were created with mica sprays and an opaque white spray done in a spray box. (I had to test my mica sprays first as some of the colors had clogged since the last time I had used them. Ended up using green, fuchsia, red and blue over a white base coat. Not more than 2-3 squirts from each color.)
Space Ship with Alien:Cut two sets of the pieces needed to make the ship and alien using the Space Charms die set.
Whirly Wheel:Β Cut a 3.5×8.5-inch rectangle from 100 lb. gray cardstock and cover both sides with clear packing tape. Cut one wheel and one large thermometer using the Whirly Wheel die set from the taped piece of cardstock. Using stencil feature, ink on arrows on wheel (or use the Whirly Wheel Words stamp set to stamp the gray cardstock before adhering the tape, then tape and die cut.) Assemble wheel as shown in video above.
Cut thumb holes into the cardbase pieces as shown in the video using the half moon shaped die in the Whirly Wheel set.
Envelope: The card fits into an A7 (5×7-inches) size envelope.
________________________
Thank you for experiencing this blog post.
I hope this inspires you and makes you smile.
Please like and leave comments π
________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.