campfire

S’more Funn Birthday Card

| ullycatdesigns

This card was made for CRAFT ROULETTE #273 whose parameters included a lady’s card, candy wrapper colors, camp(s)/(ing) element, and belt. I chose to make a trifold, slimline card that is interactive using Karen Burniston dies and some custom cut pieces of my own design.

Watch the process video to see how I made this card.

Cardbase:  The cardbase is a trifold, so there are three panels (I made mine out of 80lb black and 110lb white cardstock, but you could make it all out of 100 lb black.) I cut two black panels at 3.75×8.5-inches for the card back. One white 4.125 x6-inches (Score at 3.75-inches and at 3.875-inches.) Cut another white panel at 4.125×7-inches (Score at 3.75-inches.) Cut two thumb holes in each panel as shown in video using die from Whirly Wheel die set. Follow video above for assembly order of panels. (You can follow the video with cutting the waves into the white cardbase panels or you and just round the tops of the panels as I eventually did.)

Flame Panels:  Cut one 3.75×6-inch panel and one 3.75×7-inch panel. Using the waves die in the Curved Edges die set, cut the two panels with waves at the top. Cut two sets of five different fire colors using the waves die from 4×3-inch pieces of paper. Adhere the fire color pieces to the panels going from darkest to lightest colors. (I ended with a dark color next to custom cut and colored logs.)

Whirly Wheel Flames:  (Watch the assembly video located at the bottom of the linked Whirly Wheel die set.) Cut two sets of wheels, thermometer arms, and washers from heavy white cardstock. (I recommend adding the arrows before adding the clear packing tape by either using a marker and the die as a stencil or stamping using the Whirly Wheel Words stamp set.) Cover all die-cut pieces with clear packing tape. Assemble as shown in the video. Test flame shapes to add to Whirly Wheel arm making sure they stay within the card base when closed. Attach to arm as shown in video.

Marshmallow Sticks:  I drew my marshmallows on sticks on a piece of 8.5x 3.5-inch white cardstock. They were fussy cut and then the sticks were colored dark brown. The marshmallows were covered with Nellie’s Choice Snow Effects, allowed to dry and then colored with light brown and hints of black to make the bubbling, toasted look of the marshmallows. The sticks were fitted and folded to the card before gluing on to the card back.

Sentiment Pop-Up:  Die cut a white l-shaped mechanism from the Katherine Label Pop-Up die set. (Watch the assembly video located at the bottom of the linked die set.) Die cut in orange and red, the Happy Birthday and its shadow piece. Install the mechanism into card making sure it is high enough in the card not to interfere with the thumbholes. Color the top sides of the mechanism black to blend into the background. (I cut a 1.5×1.75-inch piece of black and colored afterwards. You could just color the three sides of the box part of the mechanism at this point.) Glue Happy Birthday onto its shadow and adhere to mechanism.

Sentiment Belt:  Cut an 11×2.5-inch strip of dark brown textured cardstock. Fold it around the card loosely so it can slide off. Glue together back edges. On a computer design a 2×2.75-inch brown panel that says “Dear Sweet Lady, Wishing you S’more Funn!” followed by instructions on how to operate the card. An additional instruction panel is added to the back of the belt.

S more Funn textDownload

Envelope:  The card fits into #10 business envelope (4.125x 9.5-inches).

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Bazzill – 8.5×11-inch Textured Cardstock – Bitter Chocolate
  • Orange, Reds and Yellow Cardstock
  • Scrapbook.com -8.5×11-inch 110lb Cardstock – White
  • The Paper Studio – 8.5×11-inch 80lb Cardstock – Black
  • #10 Business Envelope – Kraft

Ink

  • Sakura – Gelly Roll Pen – Medium – White
  • Sharpie – Permanent Marker – Fine Tip – Black, Red
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black
  • Stampin’ Up – Stampin’ Blends – Dark and Light Cooper Clay

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Craft Knife
  • Scissors
  • Pencil
  • Paper Masking Tape

Miscellaneous

  • Nellies Choice – Snow Effects

Rowboat Campsite Pop-Up Card

| ullycatdesigns

This card was made for Craft Roulette #227 whose parameters included a 4×8 project mountain colors, float(s) or floating element and water.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Bazzill – 8.5×11 Cardstock – Tiara -18-1002
  • Concord & 9th – 8.5×11 Single Color Cardstock – Sea Glass
  • Honey Bee Stamps- 6×8.5 Double-Sided Cardstock – Grain and Grunge
  • Keep It Simple – 12×12 Double-Sided Cardstock – Back to Basics Jade Collection
  • Colored and White Cardstock

Ink

  • Hero Arts – Alcohol-Marker Friendly Ink Pad – Intense Black
  • Ranger – Tim Holtz – Distress Ink- Vintage Photo
  • Ranger – Tim Holtz – Distress Oxide- Old Paper, Rusty Hinge & Tea Dye
  • Mont Marte – Dual Tip Art marker – E2 Raw Sienna
  • Gel Pens – White and Pink
  • Pigma – Mircon 01 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Fine Tip – Olive Green
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black, Brown  and Red
  • Sakura – Gelly Roll Pen – Medium – White

Adhesives

Tools

  • Die Cutting Machine
  • Bone Folder
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks used as paperweights
  • Scissors
  • Pencil
  • We R Memories – QuickStick
  • Craft Mat
  • Craft Clips
  • Sponge Daubers
  • Blending Brush
  • Paper Masking Tape

Miscellaneous

  • Twine
  • Bamboo Cording

Camping at the Lake

| ullycatdesigns

This card was made for Craft Roulette #208 whose parameters included a joy-fold card, buggy ride colors, sticks and stones element and trim(s) or trimming(s).

For this joy-fold card I used the colors of a buggy ride to the lake to go camping with a fishing stick and campfire stones. The lake is made of blue rick-rack trim on acetate. All dies used are by Karen Burniston.

Cardbase: A joy-fold is basically a smaller card that interleaves with a larger card. My smaller card is an oval cut from acetate and sandwiched between some kraft splattered cardstock with the cardstock folded and glued into the larger purchased 5×7 cardbase. The larger cardbase had its front panel trimmed to 4-inches wide. The larger cardbase was covered with green grass paper inside (covering over the kraft cardstock) and its front panel covered with blue dotted paper.

Lake: The front of the oval acetate flap was covered with rick-rack using double-sided tape. A kraft cardstock tab was added to make it easier to open the velco fastener that keeps the card close and the bam boxes from popping open. The tab is stamped with “Lift the flap.” The sentiment of “Hello nature” is cut using the Word Set 6 – Summer set.

Tent: Watch the assembly video at the bottom of the linked page. The tent pop-up can be made with out the cording, but I chose to add the cording using tiny brads on another layer of grass green cardstock to attach it.

Animals: The racoon and fox are made with the Woodland Animals die set. They are glued to small bam boxes to make them pop-up. The fish are from the Camping Charms set and are colored with pink and mint green glitter brush markers. The fishing stick is also in the Camping Charms set.

Campfire: The pop-up campfire is made up of five dies that form the campfire pit and burning logs. It is part of the Tent Pop-Up set.

Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊

Materials Used:

Dies

Stamps

  • Lawn Fawn – Photopolymer Clear Stamps – Push Here -LF1415

Papers

  • Bazzill – 8.5×11 Textured Cardstock – Tiara
  • Bazzill – 8.5×11 Textured Cardstock – Rain Forest
  • Keep It Simple – 12×12 Double-Sided Cardstock – Jade Collection Pack-Spearmint Grass
  • Spellbinders – 8.5×11 Textured Cardstock – Terra Cotta
  • The Paper Studio – 8.5×11 Printed Paper – Random Dot – Robin’s Egg Blue
  • Colored Cardstock
  • Mica Spray Splattered Kraft Cardstock
  • Dura-Lar .0005 Clear Film Acetate
  • Park Lane Paperie – A7 Cardbase and Envelope – White

Ink

  • Hero Arts – Intense Black
  • Ranger – Tim Holtz – Distress Ink – Black Soot
  • Scrapbook.com – Glitter Brush Marker – Blush Pink
  • Scrapbook.com – Glitter Brush Marker – Minty Green
  • Scrapbook.com – Glitter Brush Marker – Red
  • Sharpie – Permanent Marker – Fine Tip – Green
  • Pigma – Mircon 01 Fine Tip Pen – Black

Adhesives

Tools

  • Die Cutting Machine
  • Bone Folder
  • Craft Mat
  • We R Memories – QuickStick
  • Craft Clips
  • Sponge Dauber
  • Stamping Blocks used as paperweights
  • Scissors
  • Metal Ruler/Straight-Edge
  • Pencil
  • Tombow – Mono – Sand Eraser -512A

Miscellaneous

  • Velco Fastner Dots
  • Blue Rick-Rack Trim
  • Linen Cord
  • Four Tiny Silver Brads