Easter

Egg Shaker Card for Easter

| ullycatdesigns

I saw a side-fold of like this card on social media and decided to make my own version using a top fold A6 (4 1/2 x 6 1/4-inches) purchased card base and the egg die from Karen Burniston’s Spring Animals die set.

Cardbase: Using a purchased A6 card base, I used double sided patterned paper from Kat Scrappiness to make a mat frame on the front panel, piecing it together as the patterned paper was 1/2-inch smaller than the card height. Added a yellow 5 3/4 x 4 1/4-inches panel over mat frame. On the back panel, I used the leftover pieces to make an interesting symmetrical design utilizing both patterned sides of the paper.

Egg Panel: A 4×5 1/2-inches rectangle cut from white cardstock, I lightly marked in pencil lines at 1 1/8-inches, 2 3/4-inches and 4 3/8-inches. Along the tops and bottoms of these lines I marked 5/16-inches from the edge. These “T” marks where to center the top or bottom of the egg die. I used the center crack in the egg die to center on the vertical lines.  After die-cutting out the six eggs, I erased the pencil marks. (I found it easier to sketch out the egg placement on the back side of the card, tracing around the die to see if it looked right before die-cutting from the front of the panel.) (I added two clay flower shaker elements to the front of the card.)

Shaker Assembly: Position the white panel over the yellow panel and mark the corners of the white panel on the yellow as well as tracing the egg cut-outs onto the yellow. Using double-sided tape, adhere a 4×5 1/2-inches rectangle of clear acetate/film to the back of the white panel. Add strips of narrow foam tape to create boxes around the traced eggs on yellow panel. Using an anti static tool to apply powder to the inside of each box (including the sides of the sides of the foam tape) and back side of acetate/film on white panel. Add confetti and clay sprinkles to each box, avoid putting too much in each box and level out any high points to below the foam tape level. Holding the card base, carefully peel off the backing paper on the foam tape. Remove any confetti from tape. Using the corner marks on the yellow panel line-up the white panel and adhere to foam tape, sandwiching the confetti inside the boxes. (I like to use the confetti sequins from This Calls For Confetti who have a variety of colors, sizes and finishes and have wonderfully quick customer service/delivery time. They also have the best anti-static tool for making shaker cards.)

Sentiment: I cut out the words only using Karen Burniston’s Happy Easter word die from purple cardstock for the inside of the card.

Envelope: I cut out a sticker from the decorative paper to embellish the back of the envelope flap.

__________________________________________________________

Thank you for reading this blog post. I hope this inspires you and makes you smile.

Please like and leave comments 😊

__________________________________________________________

Materials Used:

Dies

Papers

  • Kat Scrappiness – Slimline Sized Patterned Paper (10.75×4 inches)– Easter on Parade
  • White and Yellow Cardstock
  • Dura-Lar .0005 Clear Film Acetate
  • Park Lane Paperie – A6 Cardbase and Envelope – White

Shaker Elements

  • This Calls For Confetti – Bokeh Bliss Teeny Tiny Mix
  • This Calls For Confetti – Crystal Metallic Aqua Violet
  • This Calls For Confetti – Opaque Iridescent Blue
  • This Calls For Confetti – Opaque Iridescent Blush
  • This Calls For Confetti – Opaque Iridescent Celadon
  • This Calls For Confetti – Opaque Iridescent Scarlet
  • This Calls For Confetti – Opaque Iridescent Vanilla
  • This Calls For Confetti – Opaque Iridescent Blue
  • This Calls For Confetti – Opaque Iridescent Blue
  • Hobby Lobby – Inclusions – Flowers
  • Spellbinders – Sweet Sprinkles

Adhesives

Tools

  • Die Cutting Machine
  • We R Memories – QuickStick
  • Tweezers
  • This Calls For Confetti – It’s No Secret Anti Static Powder
  • Stamping Blocks used as paperweights
  • Scissors
  • T-Ruler
  • Pencil
  • Tombow – Mono – Sand Eraser -512A

Bunny Cake Easter Card

| ullycatdesigns

It’s time for the Karen Burniston March 2024 Design Team Challenge with the theme of Bunny Ears.

I decide on a pop-up bunny cake using the Cake Pop-Up with the Animal Add-Ons 5 and Easter Borders along with the new Happy Easter sentiment and paper doilies.

______________________________________________________________________

Thank you for watching and reading this blog post. I hope this inspires you and makes you smile.

Please like and leave comments 😊

______________________________________________________________________

Materials Used:

Dies

Papers

  • Hot off The Press – Paper Pazazz – 12×12 Single-Sided Paper – Soft Tints Green Stripes
  • Keep It Simple – 12×12 Double-Sided Cardstock – Jade Collection Pack – Random Dot & Solid
  • Black, Green, Orange, Pink and White Cardstock
  • Park Lane Paperie – A7 Cardbase and Envelope – White

Ink

  • Ranger – Tim Holtz – Distress Ink- Vintage Photo
  • Sizzix – Luster Wax – Lilac Rainbow
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black
  • Pigma – Mircon 01 Fine Tip Pen – Black

Adhesives

Tools

  • Tweezers
  • Sponge Dauber
  • Stamping Blocks used as paperweights
  • Scissors
  • Tweezers
  • Ruler
  • Pencil

Miscellaneous

  • 6 Heart Shaped Paper Doilies

Pop-Up Chick In A Basket

| ullycatdesigns

Wanting a basket to put a hatching chick pop-up ball in, I came up with a collapsible basket card for Easter using several of the new die sets in Karen Burniston’s February 2024 release.

How to make this interactive card:

Chick: Make two Mini Pop-up Balls – one entirely yellow and the other half yellow, half white. Assemble chick following Karen Burniston’s assembly video located at the bottom of the Mini Pop-up Balls page. Cut six of the top and bottom eggshell jagged pieces and one hexagon for the top of the egg from white cardstock using the dies from the Animal Add-on 5 die set.

Basket: Cut four of the basket pieces from the Wide Woven Basket Box Card set and assemble as shown in the KB assembly video at the bottom of the linked page. Trim off the side tabs on the four basket pieces. Watch the following video. Cut two of the largest crosshatch squares from brown.

Closure Sentiment: Cut the Shadow from the Happy Easter word set from white. Cur the words from yellow and ink bled to a darker yellow. Die cut eggshell and chick pieces following assembly video for Spring Animals.

Glue assemble chick to sentiment.  Cut eight of the smaller eye circles and two of the larger eye circles from the Mini Pop-up Balls die set. Glue four of the small circles onto one of the large circles. Cut a piece of string at least 24-inches long and glue one end on top of small circle stack. Glue the last four circles on top of the string end, thus sandwiching the string in center of the small circles stack of eight. Attach to top of stack the last large circle. Once the stack is dry, glue to the back of the sentiment and then onto top basket flap. Let dry with a weight on top of it.

Envelope: This card would either be hand delivered or mailed in a bubble pack envelope.

_______________________________________

Thank you for reading this blog post. I hope this inspires you and makes you smile.

Please like and leave comments 😊

_______________________________________

Materials Used:

Dies

Papers

  • Hot off The Press – Paper Pazazz – 12×12 Single-Sided Paper – Soft Tints Green Stripes
  • Black, Blue, Brown, Orange, White and Yellow Cardstock

Ink

  • Ranger – Tim Holtz – Distress Ink- Fossilized Amber and Vintage Photo
  • Pigma – Mircon 01 Fine Tip Pen – Black

Adhesives

Tools

  • Stamping Blocks used as paperweights
  • Scissors
  • Tombow – Mono – Sand Eraser -512A

Miscellaneous

  • 24-inches of Baker’s Twine

Easter Flowers

| ullycatdesigns

IMG_4049

I love playing with the shaded tulip Stamp & Layer set by Susan Bates for Papercraft Inspirations magazine, issue 182. I stamp a full page of white cardstock with flower heads and then another page with just leaves and stems. I keep them in a small plastic bag with the stamp set so when the mood strikes I can create. I pulled papers and ribbon from my stash. The uppercase letters were die cut using Recollections cutting templates. Limoncello colored Nuvo Jewel Drops were dotted on the letters while Blue Babe Gloss Nuvo Crystal Drops were used for the dots in the background.

IMG_4053