Pop-Up Gift Bag Card

This card was made for CRAFT ROULETTE #278 whose parameters included a thank you card, bakery colors, shop (s) (ing) element, and ombre. I chose to make a a pop-up gift bag card that holds gift card using Karen Burniston dies.

Watch the process video to see how I made this card.

Cardbase: Β I started with a purchase A2 (4 5/8×6 1/8-inch) cardbase with matching envelope. The four panels are covered with the second and third larges rectangles and the scalloped die in the Rectangles and Labels – Crosshatch die set.

Gift Bag Pop-Up: Β Watch the assembly videos for the Flip Frame Pop-Up and Mini Gift Bag located at the bottom of each of the linked pages. Follow the directions in the video above to added to this card.

Sentiments: Die cut “Thank You” and glue inside card. Cut the largest crosshatch label in the Rectangles and Labels – Crosshatch die set to use as a space for a personal message. “Just popping up to” is from Word Set 4 – Just A Note. Dies from Word Set 2 – Birthday, Word Set 3 – Holiday, Word Set 17 – Congratulations and Word Set 18 – Connectors were used for word surgery to make “help with your retail therapy.” Flowers were cut from the Fun Flowers die set to decorate the card front and envelope.

Envelope: Β Extra flowers were die cut from the Fun Flowers Set.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Papers

  • White 65lb Cardstock
  • Hot Off The Press – Paper Pizazz – 12×12 Decorative Paper – Brown Leather, Soft Tints Pink Swirls & Suns Border
  • Park Lane – A6 Cardbase and Envelope – Textured White

Ink

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Pear Blossom Press – Cardmaker’s T-square A2
  • Tweezers
  • Scissors
  • Pencil
  • Paper Masking Tape

Miscellaneous

  • Blue Satin Ribbon – 1/8-inch wide

Interactive Clapping Hands Card

This card was made for CRAFT ROULETTE #274 whose parameters included a thank you card, decoration colors, hands element, and tone on tone. I chose to make a shaped interactive card that features cartoon hands that clap.

Watch the process video to see how I made this card.

Cardbase: Β I started with an 4.125×11-inch piece of white cardstock folded in half to form a top-fold cardbase. Trace around cartoon hand pattern, cut and use a black marker to outline the hand’s features as shown in the video above.

Clapping Hands Pop-Up: Β Die cut main twist pop-up mechanism, the panel strip and two flag arms from Karen Burniston’s Little Twist Pop-Up die set. (Watch the assembly video located at the bottom of the linked die set.) Install twist panel pop-up as shown in the video above. Cut two sets of arms from the Spellbinder’s Classic Mouse dies and add to the flag arms as shown in the video above.

Sentiments: Die cut “thank you” and glue inside card. Sketch in pencil and then cover with a fine tipped black marker the sentiments on the thumbs.

Envelope: Β The card fits into an A2 size envelope (4.125x 5.5-inches).

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Papers

  • White Cardstock
  • Fraser Papers for William House – A2 Envelope – Genesis Text Husk Smooth

Ink

  • Pigma – Mircon 05 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Fine Tip – Black

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Eraser
  • Scissors
  • Pencil
  • Paper Masking Tape

Tag Birthday Card

This tag birthday card was made for Craft Roulette #197 whose parameters included a card with two tags, happy colors, nail(s) and “outside the line.”

I followed the directions on Karen Burniston’s assembly video for making this Circle Tag Book Pop-Up (which is on the bottom of the linked page for this die set.)

The Nuvo Dream Drops that I used were fairly easy to apply as finger nails on the hands that were die-cut using a set by Karin Joan’s Missees collection.

For sentiments, I used Karen Burniston’s Happy Birthday with its shadow cut from a holographic pink paper. I added heart hands cut from the same die set as the inside hands. The back white label is a place for a personal message. A gift card could be tucked inside for a manicure.

Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊

Materials Used:

Dies

Papers

  • Ink N’ Splatter – 6×6 Double-Sided Cardstock – Raspberry Crush

Ink

  • Nuvo Dream Drops – Rudolph’s Nose

Adhesives

Tools

  • Die Cutting Machine
  • Scissors

Miscellaneous

  • Pink Gingham Ribbon – 1/4-inch wide
  • Peach Organza Ribbon – 1/2-inch wide