It’s Sneak Peek Week for Karen Burniston’s February 2024 release. These dies will be available for purchase on February 19, 2024 on the KB Riley LLC website.
Your co-worker is leaving for a new job and you need a card for others in the office to sign for her. That is the brief for this accordion card.
It’s Sneak Peek Week for Karen Burniston’s February 2024 release. These dies will be available for purchase on February 19, 2024 on the KB Riley LLC website.
Inspired by a little girl who loves to pretend she is a mermaid in her backyard pool, this birthday card features not only mermaids, but also a blow-up flamingo float in a pop-up pool.
Cardbase: I used a purchased 5×7 white cardbase that I covered all four panels with polka dot papers- blue on outside and green inside – using the largest rectangle in the Crosshatch Rectangles and Labels die set. This will be a top-fold card.
Mermaids: Using the Princess and Mermaid set to cut three of the mermaid’s body from green glitter cardstock – one was cut on the reserve side of the glitter cardstock. Cut three long hair pieces from pale yellow cardstock and two head and shoulders from a skin shade of cardstock. The mermaid on the inside needs to have both the front and back finished, hence the reverse cut body and extra hair pieces. Ultra fine tipped markers were used to draw on the face and a light blending of pink ink along with a dots of pink glitter gloss to the checks. Sandwich the head and shoulders between the mermaid body pieces and then attach the hairpieces. Add clear glitter gloss to hair. Make mermaid for card front in similar manner, but do not finish the backside. Cut a small shell from the die set and tint with pink ink. Have front mermaid hold the shell.
Flamingo Float: Using the flamingo float dies in the Tiny Accessories 4, cut one float and two wings. Decorate both sides of float and one front of wing and back of wing. Shade the float and wings with pink ink and add white highlights with gel pen. Color the beak with a black marker and add white highlights. Cut two tiny white circles and with black marker make small circles and add a white dot highlight for the eyes. Glue eyes on either side of float. Slip mermaid into float and then attach wings.
Pool: (Watch assembly video above for this modification of the Cake Pop-Up.) Cut two of the largest cake layer in the Cake Pop-Up die set from water patterned paper. Cut another two using the same die piece from a pattern paper that will be the outside of pool. Trim off bottom tab and four-sided trapezoid top flap from each of the outside pool pieces to form a tabbed strip. Using the four-sided trapezoid as a pattern trace and cut out two pieces from water patterned paper. Assemble as directed adding mermaid on flamingo float. Attach to inside of top-fold card. Decorate the inside cardbase with a beach ball from Beach Charms and tiny flamingo from Beach Borders.
Sentiments: The card front sentiments come from two different sets – Word Set 9 – Love and Word Set 5 – Royalty. “Love you” was cut from white patterned paper and brushed with clear glitter gloss. The “My Little” banner has in-laid letters that are also brushed with glitter gloss. Sequins, acrylic drops and heart are the dimensional accents to the card front.
For the inside sentiment of “Happy Birthday,” both the word set and shadow dies were used with the shadow cut from white patterned paper and the words cut from pink cardstock brushed with pink glitter gloss. The framed label for a personal message has three frames and one label cut using the largest frame die in the Rectangles and Labels – Crosshatch die set. Green sequins were added to the corners of the label.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
It’s Sneak Peek Week for Karen Burniston’s February 2024 release. These dies will be available for purchase on February 19, 2024 on the KB Riley LLC website.
Sometimes a friend, family member or co-worker just needs a bit of comforting. So this small gift of a hug in a mug with a packet of a tea is just what is needed.
The card and paperclip closure are made with dies by Karen Burniston including her the Tea and Coffee Pop-Up from her February 2024 release.
Card: Fold a 3×6-inch rectangle of white cardstock in half to make a 3-inch square. Using the mug die from the Tea and Coffee Pop-Upset, Place the straight side of the mug (the one opposite the handle) with the cutting edge just past the fold of the white cardstock and die cut the mug shape card. Cut one mug from patterned cardstock and a second one from black cardstock. Glue the patterned paper onto the front of the card. Trim off the handle of the black mug and glue it over the patterned paper handle.
Sentiments: Cut a heart from coordinating decorative paper using the third smallest die in the Hearts -Crosshatch set. Glue to front of mug. Die cut the words “HUG IN A MUG” from black using the Mini Alphabet and Numbers dies. Glue words over heart. (I used the plaid lines on my decorative paper to help me align the letters. You can also use low-tack tape to create straight lines for your letters.) Die cut a tea bag from the Tea and Coffee Pop-Up set to use as a gift tag. Thread embroidery floss through the hole. Write the name of who is receiving the gift on tea bag. Use the inside of the card to write a personal message.
Envelope: Cut a 5-inch square of double-sided decorative cardstock. Using the third largest die in the Squares – Crosshatch or a 3-inch square template center the square inside the 5-inch square so that it creates four, of the same size, triangles at the tips of the larger square. Trace around the die or template with a pencil. Using a ruler extend the lines of the sides of the square to edge of the paper. Using a score board, these lines. Fold the corner in on the cardstock to form an envelope.
Paperclip Closure: Cut a heart from coordinating decorative paper using the second smallest die in the Hearts -Crosshatch set. Glue it to the paperclip. Tie the tea bag to the paperclip and glue the thread tails behind the heart. Tea bag in the Tea and Coffee Pop-Up set.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
It’s Sneak Peek Week for Karen Burniston’s February 2024 release. These dies will be available for purchase on February 19, 2024 on the KB Riley LLC website.
Who doesn’t enjoy a vacation and this tag card is sure to let those going on a cruise vacation know they are in for some fun.
Tag Cardbase: Cut two of the largest tags in the Topper Tags die set from kraft cardstock. Use the hinge die in the Tag Book Pop-Up or cut a rectangle of 1.5×3.5-inch and fold in half for the card hinge that is glued to the inside of the two tags. Cut two large tags of decorative cardstock and glue over the inside of the tags and hinge. Cut another two large tags of decorative papers and glue to the front and back of the card. (My inside decorative cardstock did not cover the entire tag, so I cut the top scalloped section of the tag from kraft cardstock.)
Pop-Up Suitcase: Follow the assembly video at the bottom of the Purse Pop-Up page link instructions to make the suitcase on a small tag cut from the Tab Book Pop-Up set. I cut the handle again twice, strap once and 20 of the corner pieces from dark brown. Cut the buckle from gold cardstock. (I used a bit of gold foil packaging form some chocolates.) The strap can be glued to the rolled under piece as long as it doesn’t block the movement of the handle as it slides open and closed.
Scuba Gear and Decorations: Using the Tiny Accessories 4 die set, cut the mask and snorkel once from black and once from blue. trim off the top and bottom knobs of the blue snorkel and glue on the black snorkel. Glue the blue mask onto the black mask to give it depth. Save the black center section of the mask to use as sunglasses. Cut a pair of flippers from black. (I had images of a passport and a map of tropical islands that I glued to the inside of the card as well as the airplane sticker on the suitcase. More travel images were added to the back and front of the card.)
Sentiments: The ship and “bon voyage” sentiment on the card from come from the Cruise Charms set while the inside tags come from the Tag Book Pop-Up set. Hemp cord is tied to the tags.
Envelope: The tag card easily fits in a #10 business envelope which I used a paper image to decorate the back flap.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
It’s Sneak Peek Week for Karen Burniston’s February 2024 release. These dies will be available for purchase on February 19, 2024 on the KB Riley LLC website.
Inspired by a bookmark card I recently made, I decided to make a bunny bookmark slimline card using Karen Burniston’s new Animal Add-ons 5, Easter Borders, and Happy Easter.
Cardbase: Start with a 7.25×8.75-inch rectangle of heavy white cardstock and fold to create a slimline card that is slightly larger than 3.5×8.5-inches. (I folded my cardbase crooked and had to even up the sides by trimming off some.) Using decorative Easter papers cover the front and back of the card with full sheets. Use scraps to cover the top and bottom of the inside of the card. Make sure to leave a gap where the card fold is in the inside papers.
Bunny Bookmark: Cut a 2×5-inch rectangle from heavy white cardstock. Round corners with a corner punch. Using the Animal Add-ons 5 set, cut the two large ears, two large oval eyes, one double circle piece, one split square teeth piece, one wavy circle tail piece and four arm pieces from white cardstock. Cut two smaller ear pieces and one triangular nose piece from pink. Cut two smaller eye pieces from black. Using a white gel pen use stencil feature to add white highlight to black portion of eyes. With a fine-tipped black pen add three dots to double circle piece for whiskers. Add three small lines to each paw for nails. Ink the edges of the teeth piece very lightly with a pale yellow ink. Assemble the face of bunny using package picture as a guide onto the top of the rectangle. Glue ears to back of rectangle and arms and hind legs to front of rectangle. (Hint: glue the hind legs to bottom corners of rectangle then glue tail to back side just above the hind leg. Then glue arms so that the paw is just above top of tail.)
Basket Pocket: (Follow directions in assembly video at bottom of linked page.) Make one Wide Woven Basket Box Card panel from brown. Ink the slat pieces with brown ink before weaving into main basket piece and glue in place. Trim off tab. Cut from green cardstock a grassy strip and glue to back side of basket top. Using thin strips of foam tape on the bottom and sides of basket panel, attach to card front to form a pocket. Insert bunny bookmark.
Raising Platform: (Follow directions in assembly video at bottom of linked pagetheRaising Platform Pop-Up.) Cut one mechanism piece from double-sided decorative cardstock. (I used a carrot and bunny print.) Assemble onto a flattened cardbase. Cut one of the largest fancy label from white cardstock and fold in half. Glue on sentiment. Train the fold with the sentiment. Attach sentiment label to mechanism.
Decorations: Cut two egg borders from Easter Borders set using two different colors of cardstock. Cut two sets of decorative eggs from the same set in a darker color. Trim egg border to width of card and use left over eggs to decorate egg borders along with decorative eggs. Glue to finished borders to bottom and top of card front. Add any extra eggs to basket grass.
Cut two more grass strips from Wide Woven Basket Box Card set and glue to cardbase above bottom decorative paper inside card. Decorate with eggs and basket from the Animal Add-ons 5 set. Cut two of the carrot borders from the Easter Borders set from orange and two sets of carrot tops from green. Assemble carrots using a Quickstik tool or tweezers. Glue carrots to base of carrot paper inside card. (I had to cut the carrot border to cover the edge aesthetically.) Glue extra carrots to the sentiment label. (I cut some carrots from my decorative paper for the label.)
Sentiment: Using the new Happy Easter set, I cut the shadow from pink and the words from blue then cardstock since they are going on top of the platform label and being folded in half. The large “Just” with shadow is from Word Set 15 – Just Because. I had to do minor word surgery using Word Set 4 – Just A Notetaking the “H” from “Hooray” and replacing the first “p” in “popping” with it to make “Hopping.” The word “by” comes from words in both word sets. “to say” is from Word Set 4.
Envelope: #10 business envelope back flaps are perfect to use border dies on. I cut the hopping rabbits and grass borders from the Easter Bordersset and used fine-tipped pens to add the eyes and noses on the rabbits.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
It’s the Karen Burniston design team challenge for February 2024 using the theme of “Oh My Hearts.”
For this challenge I chose to make some mini valentines that fit into a Candy Hearts Box.
Box: Review the assembly directions on the back of the packaging for the Candy Hearts Box. I used thin double-sided tape to assemble the box. Adhesive sequins were added to the hot air balloon printed on the cardstock. Three hearts were cut from all the hearts without words in the die set from coordinating papers. The top two hearts were attached with a strip of double-sided tape and the sides folded up. Two adhesive backed sequins were glued to the center of the hearts.
Ice Cream Card: A 2-inch by 6-inch rectangle was cut from decorative cardstock and folded in-half for a 2×3-inches top fold card. The inside of the card was covered with decorative cardstock. A second piece 3-inch by 5-inch rectangle of matching cardstock was folded in half and the tiered platform pop-up from the Mini Pops die set was used to cut in to the 3×5 rectangle following theassembly video at the bottom of the link page. Train the main platform’s folds and then center over the top fold card and glue down. Trim excess platform cardstock from edges of card.
Cut the scoop of ice cream from the Sweet Treats Charms set and color in the sprinkles with pens. Cut the silver dish from the bottom of the trophy in the Treasure Charms.
Cut candy hearts with messages using the dies in the Candy Hearts Box set. I cut free-handed the two tiny spoons from silver mirror cardstock. Adhere ice cream assembly to top tier of platform.
Spiral Hearts Card: A 2-inch by 6-inch rectangle was cut from decorative cardstock and folded in-half for a 2×3-inches top fold card. The inside of the card was covered with decorative cardstock. The spiral platform is from the Mini Pops die set and cut from white shimmer cardstock. Follow directions in theassembly video at the bottom of the link page or on back of the packaging for attaching the spiral. Add three sizes of hearts cut from the Candy Hearts Box set and glue to spiral platform. I had leftover hearts and labels from an Easter box project that I used to decorate the card.
Twist Panel Card: A 2-inch by 6-inch rectangle was cut from decorative cardstock and folded in-half for a 2×3-inches top fold card. The inside of the card was covered with decorative cardstock. Using the same patterned cardstock used inside the card, cut one twist panel mechanism using the Little Twist Panel Pop-Up die set. Cut the panel strip and the two banner halves from decorative paper. Follow directions in the assembly video at the bottom of the linked page or on back of the packaging to attach the twist mechanism, panel and banner. Trim the excess paper from edges of card before decorating. The banner ends may need to be trimmed back to fit into the card. Add hearts and check the positioning by closing the card while glue is still wet. I used the tiny heart in the Office Charms die set to decorate, but you could use other tiny hearts from other die sets.
The three cards easily fit into the candy box for a boxed set of mini-Valentines.
_____________________________________________
Thank you for reading this blog post. I hope this inspires you and makes you smile. 😊
This card was made for Craft Roulette #201 whose parameters included an easel card, quiet colors, sweets element and bokeh.
Cardbase: Cut one rectangle 3 3/4x 8 1/2-inches from heavy white cardstock. Cut a second white rectangle 3 3/4x 8 3/4-inches. On the largest rectangle score at 1/4 inch at one end and 3-inches at the opposite end. (The 1/4-inch is the tab folded under as the card hinge to card back. The 3-inch tab is the ease for the paper doll.)
Thank you for reading this blog post and watching the video. I hope this inspires you and makes you smile. Please like and leave comments 😊
Materials Used:
Dies
Karen Burniston in cahoots with Riley and Company – Hello – 1166
Karen Burniston in cahoots with Riley and Company – You’re Sweet – 1087
Karen Burniston in cahoots with Riley and Company – Ice Cream Sundae Pop-Up – 1082
Studio Light – Misses Dies & Stamps by Karin Joan – Betty
Studio Light – Misses Dies & Stamps by Karin Joan – Tasha
Stamps
Studio Light – Misses Dies & Stamps by Karin Joan – Betty
Studio Light – Misses Dies & Stamps by Karin Joan – Tasha
Papers
PhotoPlay – 12×12 Double-Sided Cardstock Collection Pack by Becky Moore – Snail Mail
I did an all day virtual workshop from Scrapbook and Cards Today with instructors Cathy Zielske, Mindy Eggen, Meghann Andrew and Jennifer McGuire. The dies and stamp set was designed by Lisa Hetrick.
Thankfully my family was kind to allow me to do this all day workshop.
This Valentine was made for Craft Roulette #200 whose parameters included kid’s card, brrrr colors, comic or cartoon element and button(s).
I have had a Peanuts collection of stamps, coordinating dies along with papers and washi tape sheets from Craftstash for a few months and thought the comic parameter was a perfect use of them.
Snoopy has such a cute button nose and the papers have some icy blues. Because a kid’s card needs some interactivity, I used a wiper mechanism by i-crafter to make Snoopy smooch Lucy. The sentiments are all computer generated.
Thank you for reading this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
Ully Cat's World 