card-making

Gilded Pop-up Birthday Cards

| ullycatdesigns

Needing some birthday cards and wanting to try out some brass colored Shimmer Relief Paste from Altenew, I made these stenciled-with-paste, card fronts and embellished them with ribbon and a Karen Burniston“hello” two-piece die cut.  Inside is a Karen Burniston pop-up greeting and a Craft Roulette inspired verse.

Cardbase: I used purchased A7 (5×7-inch) cardbases that I stenciled the fronts with Shimmer Relief Paste and stencils by Honey Bee Stamps (Scattered Seeds) and Scrapbook.com (Hearts). The card backs feature a single balloon from the Big Birthday Charms die set.

Pop-Up: Watch the assembly video for the Katherine Label. Stamp the verse inside the card before adding the mechanism. (I found that gluing the bottom word onto the mechanism worked best to avoid catchpoints, including the two added balloons.)

Sentiments:  All the inside die cut sentiments used on the card come Karen Burniston designs including the Katherine Label mechanism that pops the “Happy Birthday” up with its Big Birthday Charms balloons. The stamped verse is from Craft Roulette’s Funn Sentiments #01.

Envelope:  The card fits into an A7 (5x 7-inches) size envelope stamped with “HBD” on the back flap from Craft Roulette’s Funn Sentiments #01.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stencils

  • Honey Bee Stamps – 6×6-inch Plastic Stencil – Scattered Seeds
  • Scrapbook.com – 6×8-inch Plastic Stencil – Hearts

Stamps

  • Craft Roulette – Clear Stamps – Funn Sentiments #01

Papers

  • Blues and Orange Foiled Cardstock
  • Gold Matte Paper – Junk Mail
  • Black, Kraft and White Cardstock
  • Park Lane Paperie – A7 (5×7-inches) Cardbases and Envelopes – Kraft

Ink

  • Memento – Fade Resistant Dye ink – Tuxedo Black
  • Nuvo – Aqua Shimmer Brush – Glitter Gloss
  • Pigma – Mircon 005 Fine Tip Pen – Black

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks used as paperweights
  • Scissors
  • Plastic Knife
  • Paper Masking Tape

Miscellaneous

  • Artistry by Altenew – Shimmer Relief Paste – Brass
  • Ribbons – White & Gold 1/2  – 3/4-inch wide

Arrow Shaped Card – Look At The Stars

| ullycatdesigns

This card was made for CRAFT ROULETTE #275 whose parameters were include an ATC, starry night colors, down element, and white dots. I chose to make a shaped card that includes an ATC (Artist Trading Card.)

Watch the process video to see how I made this card.

Cardbase:  I started with two pieces of 4.125×11-inch white cardstock. Traced around the arrow pattern I made from scrap paper and cut both of the arrows at the same time. I trimmed one arrow, at the wide end, off by .5-inch to let the other arrow have a tab to connect the the two pieces together. (After I completed the card, I found it was a little too long to fit in an 6×9-inch catalog size envelope, so I trimmed the arrow tip a little to made it fit.)

Sentiments: I used Karen Burniston’s Mini Alphabet to make the “When you’re down, Look up to the stars” sentiment. (I lined the letters up on my grid mat and used low tack tape the pick them up in line and then added glue, pressed in place on the card and finally lifted the tape off, pressing letters onto card.)

Envelope:  The card fits into an catalog size envelope (6x 9-inches).

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

  • Penny Black – Clear Stamps – My Universe

Stencils

  • Stampers Anonymous – Tim Holtz – Hocus Pocus

Papers

  • Digital Printed Starry Starry Night Paper
  • Spellbinders – 8.5×11-inch 100lb Cardstock – Cosmic Sky
  • What Cardstock
  • White Catalog Envelope

Ink

  • Hero Arts – Acrylic Spray – Opaque White
  • Memento – Fade-Resistant Dyke Ink – Paris Dusk
  • Pigma – Mircon 05 Fine Tip Pen – Black
  • Ranger – Tim Holtz – Distress ink – Fossilized Amber
  • Sakura – Gelly Roll Pen – Medium – White
  • Spellbinders – Opaque Watercolor – Splatter White

Adhesives

Tools

Interactive Clapping Hands Card

| ullycatdesigns

This card was made for CRAFT ROULETTE #274 whose parameters included a thank you card, decoration colors, hands element, and tone on tone. I chose to make a shaped interactive card that features cartoon hands that clap.

Watch the process video to see how I made this card.

Cardbase:  I started with an 4.125×11-inch piece of white cardstock folded in half to form a top-fold cardbase. Trace around cartoon hand pattern, cut and use a black marker to outline the hand’s features as shown in the video above.

Clapping Hands Pop-Up:  Die cut main twist pop-up mechanism, the panel strip and two flag arms from Karen Burniston’s Little Twist Pop-Up die set. (Watch the assembly video located at the bottom of the linked die set.) Install twist panel pop-up as shown in the video above. Cut two sets of arms from the Spellbinder’s Classic Mouse dies and add to the flag arms as shown in the video above.

Sentiments: Die cut “thank you” and glue inside card. Sketch in pencil and then cover with a fine tipped black marker the sentiments on the thumbs.

Envelope:  The card fits into an A2 size envelope (4.125x 5.5-inches).

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Papers

  • White Cardstock
  • Fraser Papers for William House – A2 Envelope – Genesis Text Husk Smooth

Ink

  • Pigma – Mircon 05 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Fine Tip – Black

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Eraser
  • Scissors
  • Pencil
  • Paper Masking Tape

S’more Funn Birthday Card

| ullycatdesigns

This card was made for CRAFT ROULETTE #273 whose parameters included a lady’s card, candy wrapper colors, camp(s)/(ing) element, and belt. I chose to make a trifold, slimline card that is interactive using Karen Burniston dies and some custom cut pieces of my own design.

Watch the process video to see how I made this card.

Cardbase:  The cardbase is a trifold, so there are three panels (I made mine out of 80lb black and 110lb white cardstock, but you could make it all out of 100 lb black.) I cut two black panels at 3.75×8.5-inches for the card back. One white 4.125 x6-inches (Score at 3.75-inches and at 3.875-inches.) Cut another white panel at 4.125×7-inches (Score at 3.75-inches.) Cut two thumb holes in each panel as shown in video using die from Whirly Wheel die set. Follow video above for assembly order of panels. (You can follow the video with cutting the waves into the white cardbase panels or you and just round the tops of the panels as I eventually did.)

Flame Panels:  Cut one 3.75×6-inch panel and one 3.75×7-inch panel. Using the waves die in the Curved Edges die set, cut the two panels with waves at the top. Cut two sets of five different fire colors using the waves die from 4×3-inch pieces of paper. Adhere the fire color pieces to the panels going from darkest to lightest colors. (I ended with a dark color next to custom cut and colored logs.)

Whirly Wheel Flames:  (Watch the assembly video located at the bottom of the linked Whirly Wheel die set.) Cut two sets of wheels, thermometer arms, and washers from heavy white cardstock. (I recommend adding the arrows before adding the clear packing tape by either using a marker and the die as a stencil or stamping using the Whirly Wheel Words stamp set.) Cover all die-cut pieces with clear packing tape. Assemble as shown in the video. Test flame shapes to add to Whirly Wheel arm making sure they stay within the card base when closed. Attach to arm as shown in video.

Marshmallow Sticks:  I drew my marshmallows on sticks on a piece of 8.5x 3.5-inch white cardstock. They were fussy cut and then the sticks were colored dark brown. The marshmallows were covered with Nellie’s Choice Snow Effects, allowed to dry and then colored with light brown and hints of black to make the bubbling, toasted look of the marshmallows. The sticks were fitted and folded to the card before gluing on to the card back.

Sentiment Pop-Up:  Die cut a white l-shaped mechanism from the Katherine Label Pop-Up die set. (Watch the assembly video located at the bottom of the linked die set.) Die cut in orange and red, the Happy Birthday and its shadow piece. Install the mechanism into card making sure it is high enough in the card not to interfere with the thumbholes. Color the top sides of the mechanism black to blend into the background. (I cut a 1.5×1.75-inch piece of black and colored afterwards. You could just color the three sides of the box part of the mechanism at this point.) Glue Happy Birthday onto its shadow and adhere to mechanism.

Sentiment Belt:  Cut an 11×2.5-inch strip of dark brown textured cardstock. Fold it around the card loosely so it can slide off. Glue together back edges. On a computer design a 2×2.75-inch brown panel that says “Dear Sweet Lady, Wishing you S’more Funn!” followed by instructions on how to operate the card. An additional instruction panel is added to the back of the belt.

S more Funn textDownload

Envelope:  The card fits into #10 business envelope (4.125x 9.5-inches).

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Bazzill – 8.5×11-inch Textured Cardstock – Bitter Chocolate
  • Orange, Reds and Yellow Cardstock
  • Scrapbook.com -8.5×11-inch 110lb Cardstock – White
  • The Paper Studio – 8.5×11-inch 80lb Cardstock – Black
  • #10 Business Envelope – Kraft

Ink

  • Sakura – Gelly Roll Pen – Medium – White
  • Sharpie – Permanent Marker – Fine Tip – Black, Red
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black
  • Stampin’ Up – Stampin’ Blends – Dark and Light Cooper Clay

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Craft Knife
  • Scissors
  • Pencil
  • Paper Masking Tape

Miscellaneous

  • Nellies Choice – Snow Effects

Rainbow Bridge Card

| ullycatdesigns

It’s the Karen Burniston design team challenge for July 2025 using the theme of Rainbow. I choose to make a sympathy card for a pet using the new Rainbow Add-Ons and the previously released Flip Frame Pop-Up, Cat and Dog, and Rectangles and Labels – Crosshatch die sets along with the Rainbow Greetings stamp set.

Watch the process video to see how I made this card.

Cardbase: I started with a purchased side-fold 4×6-inch A6 cardbase. Cover the four panels with decorative papers cut using the scalloped edge die in the Rectangles and Labels – Crosshatch set. Use the large frame die in the Flip Frame Pop-Up set to cut the card front frame. The dog comes from the Cat and Dog die set. I inked the white dog slightly with gray ink and used a fine tipped black marker to stencil in his face and paw areas.

Rainbow Flip Pop-Up: Watch the assembly videos for the Flip Frame Pop-Up and Rainbow Add-Ons located at the bottom of each linked die set.

Sentiments:  All the sentiments used on the card come from the Rainbow Greetings stamp set and are stamped in brown ink. They are cut out using the two smallest label dies in the Rectangles and Labels – Crosshatch set.

Envelope:  The card fits into an A6 (4×6-inches) size envelope.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Darice – 8.5×11-inch Single-Sided Paper – Green Prints
  • Concord & 9th – 8.5×11-inch Solid 80 lb Cardstock – Poppy, Marmalade, Buttercup, Clover, Peacock, Eggplant, Spout, Oceanside
  • Green and White Cardstock
  • Park Lane Paperie – A6 Cardbase & Envelope – Cream

Ink

  • Memento – Fade Resistant Dye ink – Espresso Truffle
  • Pigma – Mircon 01 Fine Tip Pen – Black
  • Ranger – Tim Holtz Distress Ink – Lost Shadow

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks
  • Scissors
  • Paper Masking Tape

Miscellaneous

  • Green Gem
  • Green Satin Bow

Whirly Wheel Projects

| ullycatdesigns

Here is a quick summary of cards using the new Karen Burniston Whirly Wheel die set.

(HINT: Click on the photo to go to the tutorial on how to make it.)

________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

________________________

A Double Whirly Wheel Fishing Themed Father’s Day Card

| ullycatdesigns

Welcome to our Karen Burniston Products – KB Riley LLC June Release Blog Hop. The Design Team have come together with Karen today for a fun blog hop to celebrate the release of 10 new dies and 5 new stamp sets. Sneak peeks of the new release started last week, and the dies are available to order NOW! (Giveaway details at the end of post.)

For my double Whirly Wheel Father’s Day card, I used several of the new dies including the Fishing Lures Charms and Whirly Wheel.

Watch the process video to see how I made this card.

Cardbase:  From white 100 lb cardstock cut a 4×8.75-inch rectangle and a 3.75×8.75-inch rectangle. Score the white 4×8.75-inch rectangle down the long side .25-inch from the edge and fold up as a tab. From patterned cardstock cut a 3.75×8.75-inch rectangle. Assemble as shown in video above.

Cut decorator panels of patterned cardstock using the Long Rectangles – Crosshatch dies and glue inside the card.

Worms and Fish:  Cut the largest fish lure and tail of one of the other fish lures from the Fish Lures Charms die set. Glue tail onto large fish and trim excess off the tail piece. Trim off loop at fish’s mouth. Color with glitter brush markers. Cut eight worms from brown cardstock. Add details with a white gel pen. Cut one large silver hook and add to one worm for the card front.

Double Whirly Wheels:  Cut two wheels and two large thermometer arms from sturdy cardstock using the Whirly Wheel die set. Cut one washer form a sturdy cardstock. (Color doesn’t matter as it will be hidden.) Using stencil feature, ink on arrows on wheel. Assemble wheels as shown in video above.

The key to having double wheels is to glue the washers of each wheel to a separate front panel with a thin sheet of copier paper sandwiched between the two wheels to prevent any catchpoints.

Can of Worms:  Cut A 3×3.5-inch piece of silver mirror cardstock. Score the backside of the piece at .5, .75, 1, 1.25, 1.5, 1.75, 2, 2.25, 2.5 inches. From the same cardstock, emboss and then cut out a circle using the Circles – Crosshatch dies as shown in the video above. Assemble as shown in the video. Decorate with worms.

Sentiments:  The sentiments were stamped in black using the Fishing stamp set. The two smallest fancy label dies in the Rectangles and Labels – Crosshatch set were used for the sentiments.

Envelope:  The card fits into a #10 business envelope.

______________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

______________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

______________________________

Materials Used:

Dies

Stamps

Papers

  • Carta Bella – 12×12 Double-Sided Paper Collection – Gone Camping
  •  Hunkydory – A4 Mirri Sheets of Cardstock – Oxidised Metals Collection
  • Brown Cardstock
  • White Cardstock
  • #10 Business Envelope

Ink

  • Memento – Fade Resistant Dye ink – Tuxedo Black
  • Pigma – Mircon 08 Fine Tip Pen – Black
  • Sakura – Gelly Roll Pen – Medium – White
  • Scrapbook.com – Shimmer Glitter Brush Marker – Pretty Pink, Key Lime Green, Frosty Blue & White
  • Sharpie – Permanent Marker – Fine Tipped – Red

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Block
  • Scissors
  • Pencil
  • Paper Masking Tape
  • We R Memories – QuickStick

Miscellaneous

  • Recollection – Mini Brads
  • Clear Sequins

GIVEAWAY

To celebrate the release Karen Burniston and each of the Karen Burniston – KB Riley LLC Design Team members will be giving away a $25 Gift Certificate to some lucky person who comments on our blog posts, so make sure you join the hop and comment on everyone’s blog post. Winners will be randomly chosen from ALL of the blog hop comments received on our blog posts by Monday, 23rd June 2025. Lots of chances to win some goodies, so just leave a comment on this post or any other blog hop posts to enter! Don’t forget to leave some way for us to contact you, in case you are a lucky winner!

Karen Burniston

Lois Bak

Sue Small-Kreider – YOU ARE HERE

Frances Byrne

Jennifer Webster

Suzanne Smit

Nicky Foden

Sandy Diller

Matchbook Purse Birthday Card

| ullycatdesigns

This card was made for Craft Roulette #271 whose parameters included a matchbook card, park colors, key(s) element, and curved and straight.

Watch the process video to see how I made this card.

Cardbase:  Start with a 6×11-inch piece of patterned cardstock and score and fold at 3 1/4, 3 3/4 and 8 1/4-inches. Thread cardstock through the Karen Burniston Long Flap and Closure smaller flap die and center before cutting curved edge of the purse flap. Use white maker to outline curved edge.

Front
Back

Ribbon Handle:  Cut an 18-20-inch piece of 3/8 to 1/2-inch wide ribbon.  Punch two holes through the folded flap and thread ribbon through the holes. Leaving enough ribbon for a purse strap, tie ribbon at holes  before tying bow.

Keys and Clasp: Die cut a total of four keys using the key die in the Karen Burniston Katherine Label Pop-Up die set. Cut two from silver foil cardstock and two more keys from the white backside of the silver foil cardstock. Glue keys together to form two keys that are silver on both sides. Add a jump ring to each key and then add each key to the third jump ring before attaching it to the ribbon. Glue large sequin to center of flap as a decorative clasp.

Sentiments:  All the sentiments used on the card come from the Craft Roulette Funn Sentiments #01 stamp set and stamped in blue ink. stamped in black ink.

Envelope:  The card fits into an A7 (5x 7-inches) size envelope that has a strip of the decorative cardstock glued to the back envelope flap.

___________________________________

Thank you for experiencing this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

  • Craft Roulette – Clear Stamps – Funn Sentiments #01

Papers

  • Darice – 8.5×11 Single-Sided Cardstock – Blue Prints
  • Your Paper Insider – Silver Holographic Oil Slick Envelope Scrap
  • A7 Envelope – Cream

Ink

  • Memento – Fade Resistant Dye ink – Paris Dusk
  • Pigma – Mircon 01 Fine Tip Pen – Black
  • Scrapbook.com – Glitter Brush Marker – Coral, Frosty Blue, Mint Green & Purple
  • Sharpie – Paint Marker – Extra Fine Tip – Oil Based White

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Stamping Platform
  • Bone Folder
  • Score Board
  • Needle-Nose Pliers
  • Hole Punch
  • Stamping Blocks
  • Scissors
  • Pencil
  • Paper Masking Tape
  • We R Memories – QuickStick

Miscellaneous

  • 18-20-inches of Ribbon
  • 3 Metal Jump Rings
  • Large sequin

Glitter and Unicorns to Celebrate Your Birthday!

| ullycatdesigns

It’s Sneak Peek Week for Karen Burniston’s June 2025 release of ten new die sets and five new clear stamp sets. For this interactive glitter unicorn birthday card, I used several of the new dies including the Leaping Animals, Display Helpers, Whirly Wheel and Rainbow Add-Ons as well as the stamps in Birthday Magic and Movie Night sets.

Watch the process video to see how I made this card.

Cardbase: An 5.5×8.5-inch sheet of light weight white cardstock was scored and folded into a side-fold 4.5×5.5 size card. Watch the video above to see how I cut the half circle into the card and cut my decorator panels of patterned cardstock using the Rectangles – Crosshatch dies.

Unicorns: I used four unicorns on the card made with the Leaping Animals die set. Watch the video above to see how to assemble the animals. There are five dies needed for the unicorn – body, underbelly, horn, mane and tail. Cut the tail, mane and underbelly from pink, horn from gold and body from white.

Whirly Wheel: Cut one wheel and one large thermometer from sturdy pink cardstock using the Whirly Wheel die set. Cut one washer from a sturdy cardstock. (Color doesn’t matter as it will be hidden.) Using stencil feature, ink in arrows on the wheel (or use the Whirly Wheel Words stamp set.) Assemble wheel as shown in video above.

Lorna Label Pop-Up: Watch either the video above or the assembly video located at the bottom of the page linked to the Lorna Label Pop-Up.

Sentiments: The sentiments were stamped using the glitter and unicorns sentiment and “Let’s celebrate!” from the Birthday Magic stamp set. The “Happy Birthday” from the Movie Night set.

Display Helpers: Using the lift dies from the Display Helpers, install at either side of the Lorna Label Pop-Up following the video above. (Using the Display Helpers stamp set, you can stamp out a note to include in your card that says “Lift the tab for display and lower the tab to close the card.”)

Envelope: The card fits into an A2 (4.25x 5.5-inches) size envelope with a die-cut heart from the Lorna Label Pop-Up set glued to the back flap.

________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

________________________________

Materials Used:

Dies
• Karen Burniston in cahoots with Riley and Company – Rainbow Add-Ons – 1309
• Karen Burniston in cahoots with Riley and Company – Whirly Wheel – 1306
• Karen Burniston in cahoots with Riley and Company – Display Helpers – 1304
• Karen Burniston in cahoots with Riley and Company – Leaping Animals – 1301
• Karen Burniston in cahoots with Riley and Company – Lorna Label Pop-Up – 1266
• Karen Burniston in cahoots with Riley and Company – Rectangles – Crosshatch – 1054

Stamps
• Karen Burniston in cahoots with Riley and Company – Clear Stamps – Birthday Magic
• Karen Burniston in cahoots with Riley and Company – Clear Stamps – Display Helpers
• Karen Burniston in cahoots with Riley and Company – Clear Stamps – Movie Night
• Karen Burniston in cahoots with Riley and Company – Clear Stamps – Whirly Wheel Words

Papers
• Craftwork Cards – 8×8 Solid Colors and Printed Papers – Flying High Collection
• Pink Holographic Non-Shedding Glitter Cardstock
• Gold, Pink and Purple Glitter Cardstock
• White Cardstock
• Fraser Papers for William House – A2 Envelope – Genesis Text Husk Smooth

Ink
• Memento – Fade Resistant Dye ink – Tuxedo Black
• Nuvo – Aqua Shimmer – Glitter Gloss
• Pigma – Mircon 05 Fine Tip Pen – Black
• Scrapbook.com – Glitter Brush Marker –Pretty Pink

Adhesives
• Neutral PH Adhesive by LINECO
• Fine-Tip Glue Bottle
• Foam Squares

Tools
• Die Cutting Machine
• Paper Trimmer
• Bone Folder
• Score Board
• Stamping Platform
• LDRS – Stampendable Stamping Tool
• Stamping Block
• Scissors
• Pencil
• Paper Masking Tape
• We R Memories – QuickStick