Hot Air Balloon Accordion Valentine Card

It’s time for the Karen Burniston Design Team February 2026 Challenge whose theme is “Love is in the air” – something flying.

I made an accordion card using the new Love Is In The Air Charms die set – along with the previously released Fancy Label Accordion, Circles – Crosshatch and Fancy Solid Frame sets. Two new stamp sets were used – Stage Scenes and Love Notes.

Watch the process video to see how I made this card.

Accordion Cardbase: Watch the assembly video located at the bottom of the linked page for the Fancy Label Accordion. Cut three Fancy Label Accordion frames from a heavy weight blue cardstock. Using the 2.4-inch die in the Circles – Crosshatch, cut openings in the label portion of TWO of the three accordion frames. Glue the three frames together with the circle frames on the ends. Cut six sets of Fancy Solid Frame from patterned paper. Glue decorative frames on to both sides of the accordion frames. (Watch this assembly video for adding frames to accordion cards.) Finish assembling the card as shown in the video above.

Hot Air Balloons: Cut four red heart charms from the Love Is In The Air Charms die set. Use the stencil feature and a white gel pen to add the highlights. Cut a total of four baskets. (I cut two brown and two pink.) Cut four white clouds and one set of tiny hearts in red. Assemble as shown in the video above. Using a thin sewing needle and cotton thread, pierce a hole into the top of the circle frame label and then thread the balloon charm onto the thread. Tie off the thread loop using a square knot. Push the knot to the back side of frame and add a drop of liquid glue to secure it to the frame. (I like the Neutral PH Adhesive by LINECO.)

Sentiments: The sentiments are stamped onto white cardstock and then cut out. On the card front is “A little love floating your way” is from the Stage Scenes. Fussy cut to fit on the card frame. Using the Fancy Label Accordion decorator dies, cut the “Love is in the air” from the Love Notes stamp set.

Envelope: The closed card fits into an A7 (5×7-inch) size envelope stamped with “Love is in the air” from the Love Notes stamp set.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please subscribe, like and leave comments 😊

Follow my YouTube channel, Instagram and Pinterest as well.

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Concord & 9th – 8.5×11-inch Solid Colored Cardstock – Harbor
  • Craft Consortium – 6×6-inch Double-Sided Cardstock – Over the Rainbow
  • Pink, Red and White Cardstock
  • A7 (5×7-inch) Envelope – White

Ink

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Stamping Blocks used as paperweights
  • Scissors
  • Paper Masking Tape
  • Thin Sewing Needle
  • Tweezers
  • We R Memories – QuickStick

Miscellaneous

  • White Cotton Sewing Thread

Going Wild for a Double Rainbow Birthday!

It’s Day One of Sneak Peek Week for Karen Burniston’s June 2025 release of ten new dies and five new clear stamps. For this double rainbow birthday card, I used several of the new sets including Arch Pop-Up and Rainbow Add-Ons die sets and Rainbow Greetings stamp set. This card was also made using Craft Roulette #270’s parameters of an A7 card, 1980s colors, interjection!!!, and include an arch.

Cardbase:  I used an A7 (5×7-inch) purchased kraft cardbase and matching envelope. The front panel is covered with a 4.5×6.5 sheet of decorative paper.

Arch Pop-Up:  Cut out the two large arch dies in the Arch Pop-Up from solid 65-80lb. cardstock. Assemble the arch by gluing the two halves together and then adding the rainbow strips which were cut using double-sided adhesive tape and the Rainbow Add-Ons die set. Make a second arch. Trim off the bottom tabs of the second rainbow and fold the feet of the arch to form tabs of a similar size to what was cut-off. Glue the largest arch into the card first and add the second rainbow checking for catchpoints. Decorate with the rainbows with the sun and clouds in the Rainbow Add-Ons.

Animals:  The animals come from the previously released the Monkey and Lion and the Safari Animals die sets.

Sentiments:  Other than the die-cut “Go Wild!” all the sentiments were stamped using the Rainbow Greetings stamp set in black ink on white cardstock. Inside the card, “Wishing you sunshine and rainbows” was cut out using the smallest fancy label die in the Rectangles and Labels – Crosshatch die set with the larger crosshatch fancy label being used for the personal message label. On the card front, “Happy Birthday” was cut out using the oval die in the Lorna Label Pop-Up die set.

Envelope:  The card fits into A7 (5×7-inches) size envelope with the back flap covered with decorative paper.

__________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

__________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

__________________________

Materials Used:

Dies

Stamps

Papers

  • Concord & 9th – 8.5×11-inch Solid 80 lb Cardstock – Poppy, Marmalade, Buttercup, Clover, Peacock, Eggplant, Spout, Oceanside
  • Spellbinders – 8.5×11-inch 80 lb Cardstock – White
  • The Paper Studio – 12×12-inch Single-Sided Patterned Paper – B/W Mirrored Polka – Bright Yellow
  • A7 Cardbase & Envelope – Kraft

Ink

  • Memento – Fade Resistant Dye ink – Tuxedo Black
  • Pigma – Mircon 03 Fine Tip Pen – Black
  • Stampin’ Up – Stampin’ Write Dual Tipped Marker – Chocolate Chip

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks used as paperweights
  • Scissors
  • Pencil
  • Paper Masking Tape