Karen Burniston Pop It Up

Snowflake Kisses and Warm Wishes

| ullycatdesigns

It’s Sneak Peak Week for Karen Burniston’s October 2024 release of new dies and sentiment stamps. These dies will be available for purchase on October 28, 2024 on the KB Riley LLC website.

Today’s card is an A2 size top-fold card that uses the new Snow Charms die set and Winter Hugs stamp set.

Watch the process video to see how this card was made.

Cardbase:  Fold in half an 11×4.25 inch piece of white cardstock to form a top-fold A2 (4.25×5.5 inch) size cardbase. Cover all four panels with rectangles of patterned paper using the largest die from the Rectangles – Crosshatch set. Cut a frame of white glitter cardstock using the same die and the next largest die and glue to the front panel.

Mug of Cocoa:  Using the Tea and Coffee Pop-Ups die set cut one mug from red cardstock covered with clear packing tape. Cut one of the largest snowflake in the Snow Charm set, snip off charm loop and cover with glitter gloss before gluing to mug center. Allow to dry before rounding/shaping mug with a bone folder. Cut from white shimmer cardstock the cupcake frosting piece from the Cupcake Add-Ons set and adhere to back of the mug with two small foam dots. Cut one steam piece from the Tea and Coffee Pop-Ups set from clear vellum.

Cut the mechanism piece and arm strip from the same patterned paper as inside of card. Cut a white crosshatch label from the Rectangles and Labels – Crosshatch set and trim off about 1/2-inch from long side. Glue the large piece of label onto the inside card floor centering it up against the fold. Glue the mechanism into card as instructed on the assembly video located at the bottom of this linked page. Attach arm to mechanism. Using a large foam dot adhere the mug to the front of mechanism. Glue vellum steam piece to arm making sure it is positioned so it does not peak-out of the card when it is closed.

Decorations: The card front decorations are from the Snow Charms set, along with some snowflake sequin mix elements. The inside spoon is from the Tea and Coffee Pop-Ups set.

Sentiments:  All the sentiments come from the Winter Hugs stamp set. All the fancy labels come from the Rectangles and Labels – Crosshatch die set. “Snowflake kisses & winter wishes” was stamped on clear vellum with StazOn ink and the whole label was covered with glitter gloss. The vellum was adhered to the card front using glue dots.

Envelope:  The card fits into an A2 (4.25x 5.5-inches) size envelope. The back flap was decorated with a hat from the Winter Animals set and mittens from the Snow Charms set.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Hot Off The Press – 8.5×11 inch Double-Sided Papers – Magnolia Blooms
  • PinkFresh Studio – Essentials 8.5×11 inch Glitter Cardstock – Glacier
  • Recollections – 8.5×11 White Gold Shimmer Cardstock
  • The Paper Studio – 8.5×11 Clear Vellum
  • Sliver Foil Cardstock
  • Black, Red and White Cardstock
  • A2 Envelope – Cream

Ink

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks used as paperweights
  • Scissors
  • Craft Knife
  • Pencil
  • T-Ruler
  • Paper Masking Tape
  • We R Memories – QuickStick

Miscellaneous

  • Buttons Galore & More – 28 Lilac Lane – Sequin Mix – Snowflakes

Poinsettia Pop-Up Christmas Card

| ullycatdesigns

It’s Sneak Peak Week for Karen Burniston’s October 2024 release of new dies and sentiment stamps. These dies will be available for purchase on October 28, 2024 on the KB Riley LLC website.

Today’s card is an A2 size Christmas card that uses the new die sets of Poinsettia and Merry Christmas Lorna Add-Ons along with Season of Cheer stamp set.

CARDBASE: Cut an 8×6-inch rectangle of a double-sided patterned paper and fold in half to form a top-fold 4×6-inch cardbase.

LORNA LABEL: Follow the assembly video for the Lorna Label Pop-Up but cut out a frame by sandwiching the largest decorator label inside the Lorna Label die. Glue the Merry Christmas Add-Ons frame to the Lorna Label frame and decorate with words from add-on set before gluing the Lorna label pop-up into the card.

POINSETTIA: From the Poinsettia die set, cut one of the large leaves die from green and another from red. Cut one red from smaller leaves die. Brush the edges of the leaves with ink slightly darker than the cardstock. Cut the small, dotted center piece once from red and once from yellow. Save the yellow dots to inlay into the red center. Glue the large red piece onto the large green piece and then top with smaller red piece. Make sure to alternate the leaves for full coverage. Adhere red and yellow flower center. Die cut five pine branches and two of the berry stems to add around the large flower.

SENTIMENTS: The Merry Christmas Lorna Add-On set has a holly leaves shadow die that is just the right size to stamp the word “and” onto and glue to the bottom tip of the Lorna Label frame. The “and” and “Happy New Year” are from the Season of Cheer stamp set. The fishtail banner is a die in the Lorna Label Pop-Up set. The holly leaves and berries are in the Merry Christmas Lorna Add-On set.

___________________________________

Thank you for reading this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Bazzill – 8.5×11 Cardstock – Gumdrop -5-5154
  • Carta Bella – 12×12 Double-Sided Cardstock – Flora No. 4 – Bold Stems
  • Fun Stampers Journey – 8.5×11 Cardstock – Cranberry Bliss
  • Cream and Yellow Cardstock

Ink

Adhesives

Tools

Miscellaneous

  • Red Organza Ribbon 1/4-inch wide

Reindeer Games

| ullycatdesigns

It’s Sneak Peak Week for Karen Burniston’s October 2024 release of new dies and sentiment stamps. These dies will be available for purchase on October 28, 2024 on the KB Riley LLC website.

This card was inspired by the age-old question pertaining to the Rudolph-The-Red-Nose-Reindeer song – What are reindeer games? My interpretation is Winter games Olympic style with Rudolph winning the sledding race!

Watch the process video to see how this card was made.

Cardbase: The cardbase is an A7 size (5 x 7-inch) purchased card base with decorative papers glued to the four panels. I used the largest rectangle in the Rectangles and Labels – Crosshatch die set to cover the inside of the card and leftover pieces for the outside of the card.

Finish Line Flag Pop-Ups: Two Photo Fans Pop-Ups were created using white cardstock brushed with glitter gloss the arms and decorator pieces. the arm decorator pieces were cut in black and the two sided flags come from the Pirate Ship Add-Ons set. (You can also find a single flag in the Castle Pop-Up set.)

Sitting Reindeer: The sitting reindeer uses the body of the Snowman Pop-Up with the face, antlers, legs and tail from the Penguin and Reindeer Snowman Add-Ons set. The sled is from the Snow Charms set. (If I were to make this card again I would make two sleds and glue them into the card first, placing them so they overlap under the reindeer trimming off the excess front and back sled pieces before gluing the reindeer base over them and into the card.)

Standing Reindeer: Two reindeer were cut using the Christmas Animals die set. One reindeer is assembled on the reverse side so that the reindeer can face each other.

Sentiments: “Reindeer Games” was created using the Mini Alphabet die set while the inside “You’re so Cool” was stamped on a fancy label from the Rectangles and Labels – Crosshatch set with a stamp from the Winter Hugs stamp set. The “Made with Love” circle image on the back of the card is from the Special Delivery stamp set. The blank personal message label is also from the Rectangles and Labels – Crosshatch set. (I didn’t have a piece of matching cardstock wide enough for this label die, so I elected to center the die and cut with flat top and bottom of the label.)

Envelope:  The card fits into an A7 size envelope with the back flap decorated with leftover blue flags.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Carnation Crafts – Merry and Bright from PaperCrafter issue 40
  • Echo Park – 12×12 Double-Sided Cardstock – Bundle of Joy -Peek-A-Boo
  • Silver Foil Cardstock
  • Black, Browns, Cream, Teal Blue, White and Yellows Cardstock
  • Park Lane Paperie – A7 Cardbase and Envelope – White

Ink

  • Hero Arts – Alcohol-Marker Friendly Ink Pad – Intense Black
  • Ranger – Tim Holtz – Distress Ink- Scorched Timber
  • Pigma – Mircon 005 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black and Red
  • Sakura – Gelly Roll Pen – Medium – White

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Paperweight
  • Stamping Blocks used as paperweights
  • Scissors
  • We R Memories – QuickStick
  • Sponge Dauber
  • Paper Masking Tape
  • Glue Eraser
  • Pencil

A CAS’ed Birthday Card

| ullycatdesigns

This card was made for Craft Roulette #236 whose parameters included use a small bag, cornucopia colors, CAS a card from Craft Roulette #235 submissions and splatters.

Cardbase: I used a purchased 5×7 gatefold cardbase and envelope.

Terre’s Card

Card Front: Terre’s card in the Craft Roulette #235 Contributions Gallery was the card I based my card front on. I changed up the dark starry paper to a more colorful ink blended background with white splatters instead of star shapes. I used a red ringed planet instead of earth as the center focal point but stamped “HBD2U” in the upper left corner, where Terre had put her sentiment, and also in the lower right corner to balance the elements.

Pop-Up Bag: Inside the card is a small gift bag that pops-up to hold a small sealed bag of sequins and shaker elements. The dies that make the bag and the pop-up mechanism arm are by Karen Burniston. The mechanism arm if installed just as it is in the assembly video for the Flip Frame Pop-Up but the Mini Gift Bag back is attached to the arm rather than the frame and the bottom of the bag is glued to the cardbase. The bag is made from thin decorative paper and the handles are hemp cording.

Sentiments: “HBD2U” Happy Birthday” and “An itty-bitty gift for your big day!” are all stamped in black ink using the Craft Roulette Funn Sentiments #01 stamp set. The “Inspired by Craft Roulette, Made by” and cat head stamps are from the Craft Roulette The basics set.

Envelope: The card fits into an A7 (5x 7-inches) size envelope.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

  • Karen Burniston in cahoots with Riley and Company – Mini Gift Bag – 1255
  • Karen Burniston in cahoots with Riley and Company – Flip Frame Pop-Up – 1134

Stamps

  • Craft Roulette – Clear Stamps – Funn Sentiments #01
  • Craft Roulette – Clear Stamps – The Basics

Papers

  • Hot Off The Press – 12×12 Single-Sided Paper – Sun’s Border – HOTP-20551
  • White Cardstock
  • Park Lane Paperie – A7 Cardbase and Envelope – White

Ink

  • Hero Arts – Alcohol-Marker Friendly Ink Pad – Intense Black
  • Ranger – Tim Holtz – Distress Ink- Dried Marigold, Fossilized Amber, Lumberjack Plaid, Twisted Citron
  • Avery Elle – White Ink Spray
  • Pigma – Mircon 01 Fine Tip Pen – Black

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks
  • Scissors
  • Craft Mat
  • Paper Masking Tape
  • Blending Brushes
  • Water Mister

Miscellaneous

  • Cousin – D.I.Y. – Natural Hemp Cord #20

A Haunted Chair In The Pumpkin Patch

| ullycatdesigns

It’s time for the October 2024 Karen Burniston Design Team Challenge with the theme of a haunted location. I chosen an Adirondack chair in a pumpkin patch to be haunted.

Watch the process video to see how the card was assembled.

Cardbase: Cut two 5 1/2 x 11-inch rectangles from black cardstock. Fold each rectangle in half to form two 5 1/2-inch square top fold cards. Two pieces of patterned paper from Graphic 45 were used to cover the inside floor and front card cover.

Adirondack Chair: Watch the assembly video for the Adirondack Chair located at the bottom of the linked page.

Ghost Mechanism: Watch the assembly video for the Spinner Square Pop-Up located at the bottom of the linked page. The ghosts are from the Halloween Charms set and were cut once from white cardstock and had their eyes and mouth stenciled on using the die. They also were cut from glow-in-the-dark paper for their backs and to hide the black mechanism arm.

Decorations: The large pumpkins are from the Autumn Elements set and the smaller jack-o-lantern and green hands are from the Halloween Elements set. The background pumpkins were cut from the Graphic 45 papers. The black cat on the chair is from the Skeleton and Bat set. The Slim Pattern Plate – Spiders was cut from pearlescent vellum and the spiders colored black. Then it was placed on the diagonal on the card front.

Sentiments: The card front uses the “Happy Halloween” from the Halloween Charms set while the inside uses a Spellbinders BetterPress “Happy Haunting” sentiment. Other inside sentiments – “Boo!” “Sit for a spell” and “Hey Pumpkin” – are cut from the Graphic 45 papers.

Envelope: The card will fit into a 6×6-inch square envelope or a 6×9-inch catalog envelope.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Press Plates

  • Spellbinders – BetterPress Letterpress System – Press Plate & Die Set – Halloween Icons

Papers

  • Graphic 45 – 8×8 Double-Sided Paper – Charmed
  • Lawn Fawn – 8.5×11 Lawn Fawndamentals – Pearlescent Vellum
  • Stampin’ Up – 6×6 Specialty Paper – Glow-In-The-Dark
  • Thin Clear Cello Packaging
  • Black, Orange, Purple, White Cardstock
  • 6×6 Brown Envelope

Ink

  • Spectrum Noir – Shimmer Gold Series Pearlescent Pigment – Peach Terracotta
  • Ranger – Tim Holtz – Distress Ink- Gathered Twigs
  • Pigma – Mircon 005 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Chisel Tip – Black
  • Sharpie – Permanent Marker – Fine Tip – Green
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black
  • Sakura – Gelly Roll Pen – Medium – White

Adhesives

Tools

  • Die Cutting Machine
  • Bone Folder
  • Stamping Blocks used as paperweights
  • Scissors
  • Pencil
  • We R Memories – QuickStick
  • Tweezers
  • Metal Ruler
  • T-Ruler
  • Glue Eraser
  • Craft Mat
  • Sponge Daubers
  • Blending Brush
  • Paper Masking Tape

A Peanuts Pumpkin Patch Pop-Up Card

| ullycatdesigns

After making a card in Karen Burniston‘s Virtual Card class for September 2024, I made a Halloween version of the card using papers from http://www.Craftstash.us.

Watch the assembly video below.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Papers

  • Craftstash – Ephemera Pack – Peanuts Halloween
  • Craftstash – 8×8 Single-Sided Cardstock – Peanuts Halloween
  • Black and White Cardstock
  • A7 White Envelope

Ink

Adhesives

Tools

  • Die Cutting Machine
  • Bone Folder
  • Paperweight
  • Scissors
  • Pencil
  • Metal Ruler
  • Craft Clips
  • Paper Masking Tape

Fireplaces in Review

| ullycatdesigns

I have been collecting and making fireplace cards for several years now. Here is a collection of all my fireplace blog posts. Click on an image to see details of the fireplace.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

A Gingerbread Cart Gift Card Holder

| ullycatdesigns

This card was made for Craft Roulette #231 whose parameters included for Project – Outside/Inside, tulip colors, festival element and checks.

Watch the video to see how I made this cart.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

  • Lawn Fawn – Clear Stamps – Sprinkled With Joy-LF1271
  • Scrapbook and Cards Today’s Jolly Holiday workshop kit
  • Trinity Stamps – Clear Stamps – Papercrafting Magic

Papers

  • Bazzill – 8.5×11 Cardstock – Cotton Candy
  • Photoplay – 6×6 Double-Sided Cardstock – Holiday Plaids
  • Stampin’ Up – 8.5×11 Cardstock – Copper Clay
  • Silver Foil Cardstock
  • Black, Green and White Cardstock

Ink

  • Stampin’ Up – Classic Ink Pad – Real Red
  • StazOn – Solvent Ink – Jet Black
  • Creative Craft Products – Alcohol Markers – Dual Tipped – WG1 Warm Grey
  • Pigma – Mircon 05 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Fine Tip – Green
  • Sakura – Gelly Roll Pen – Medium – White

Adhesives

Tools

  • Die Cutting Machine
  • Teflon Folder
  • Paperweight
  • Stamping Blocks
  • Stamp Shammy
  • Scissors
  • Pencil
  • We R Memories – QuickStick
  • Tweezers
  • Metal Ruler
  • T-Ruler
  • Craft Clips
  • Paper Masking Tape

Miscellaneous

  • Nuvo – Crystal Drops – Dandelion Yellow, Double Denim, Red Berry, Simply White & Woodland Green
  • Black Metallic Adhesive Gems
  • Pear Blossom Press – Twinkle Lights

Seasons Change – A Pop-Up Card

| ullycatdesigns

It’s time for the September 2024 Karen Burniston Design Team Challenge with the theme of Seasons.

This card could be used for retirement, thinking of you, and encouragement depending on what extra sentiment is added to the card. Watch the tutorial video below. You may also want to watch the assembly video for the Square Spinner Pop-Up die located at the bottom of this linked page.

The cardbase is a purchase A7 size (5×7-inches) The inside decorative papers are 4 3/4 x 6 3/4-inches. The outside panels have a 5×7-inches base and a 4 1/2 x 6 1/2-inch topper. The front panels were sprayed with white ink on the blue cardstock and green mica on the green cardstock.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Materials Used:

Dies

Stamps

Papers

  • Concord & 9th – Cardstock – Harbor & Sea Glass
  • The Paper Studio – 8.5×11 Clear Vellum
  • The Paper Studio – 8.5×11 Pattern Paper – Pastel Abstract
  • Black, Brown, Green, Orange, Pink, Red, White and Yellow Cardstock
  • Park Lane Paperie – A7 Cardbase and Envelope – White

Ink

  • StazOn – Solvent Ink – Jet Black
  • Avery Elle – White Spray Ink
  • Nuvo Mica Mist – Fresh Pear
  • Pigma – Mircon 01 Fine Tip Pen – Black
  • Scrapbook.com – Glitter Brush Marker – Orange Juice
  • Sharpie – Permanent Marker – Ultra Fine Tip – Yellow
  • Sakura – Gelly Roll Pen – Medium – White
  • Nuvo – Aqua Shimmer – Glitter Gloss

Adhesives

Tools

  • Die Cutting Machine
  • Bone Folder
  • We R Memories – QuickStick
  • Stamping Platform
  • Brutus Monroe – Stick & Stamp Mat
  • Scissors
  • Pencil
  • Paper Masking Tape