Arrow Shaped Card – Look At The Stars

This card was made for CRAFT ROULETTE #275 whose parameters were include an ATC, starry night colors, down element, and white dots. I chose to make a shaped card that includes an ATC (Artist Trading Card.)

Watch the process video to see how I made this card.

Cardbase:  I started with two pieces of 4.125×11-inch white cardstock. Traced around the arrow pattern I made from scrap paper and cut both of the arrows at the same time. I trimmed one arrow, at the wide end, off by .5-inch to let the other arrow have a tab to connect the the two pieces together. (After I completed the card, I found it was a little too long to fit in an 6×9-inch catalog size envelope, so I trimmed the arrow tip a little to made it fit.)

Sentiments: I used Karen Burniston’s Mini Alphabet to make the “When you’re down, Look up to the stars” sentiment. (I lined the letters up on my grid mat and used low tack tape the pick them up in line and then added glue, pressed in place on the card and finally lifted the tape off, pressing letters onto card.)

Envelope:  The card fits into an catalog size envelope (6x 9-inches).

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

  • Penny Black – Clear Stamps – My Universe

Stencils

  • Stampers Anonymous – Tim Holtz – Hocus Pocus

Papers

  • Digital Printed Starry Starry Night Paper
  • Spellbinders – 8.5×11-inch 100lb Cardstock – Cosmic Sky
  • What Cardstock
  • White Catalog Envelope

Ink

  • Hero Arts – Acrylic Spray – Opaque White
  • Memento – Fade-Resistant Dyke Ink – Paris Dusk
  • Pigma – Mircon 05 Fine Tip Pen – Black
  • Ranger – Tim Holtz – Distress ink – Fossilized Amber
  • Sakura – Gelly Roll Pen – Medium – White
  • Spellbinders – Opaque Watercolor – Splatter White

Adhesives

Tools

Stenciled Cake Pop-Up Birthday Card

Here are two birthday cards I made using a stamp and coordinating die and stencils set from This Calls For Confetti and Karen Burniston’s Katherine Label Pop-Up and Happy Birthday word die sets.

Watch the process video to see how I made this card.

I made two versions of the card – one using patterned paper as a background and the other with a stenciled card front.  Both started with a purchased A6 (4.5×6.25-inch) cardbase with matching envelope. Both have the pop-up sentiment inside with the words, shadow and mechanism being cut from an additional cardbase and colored with the same Distress Ink colors used to stencil the cake.

Envelope:  The card fits into an A6 (4.5x 6.25-inches) size envelope stamped with a sentiment from Craft Roulette.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stencils

  • Daisy Mae Designs – Dotty Stencil
  • This Calls For Confetti – Three Tier Cake Layering Stencil & Die

Stamps

  • Craft Roulette – Clear Stamps – Funn Sentiments #01
  • This Calls For Confetti – Clear Stamps – Alice’s Story Birthday Sentiments

Papers

  • Laserowe Love – 12×12 inch Double-Sided Paper – Vintage Trip by Renata Maslyk
  • Cream 65lb Cardstock
  • Park lane Paperie – A6 Textured Cardbases & Envelopes – Ivory

Ink

  • Memento – Fade Resistant Dye ink – Tuxedo Black
  • Pigma – Mircon 005 Fine Tip Pen – Black
  • Ranger – Tim Holtz – Distress ink – Dried Marigold, Peacock Feathers, Picked Raspberry

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Gelli Arts – Gel Plate
  • Scissors
  • Sponge Dauber
  • Paper Masking Tape
  • We R Memories – QuickStick

Miscellaneous

  • 3 Clear Rhinestones Flatback Gems
  • 3 Tiny Gold Flatback Gems

Interactive Clapping Hands Card

This card was made for CRAFT ROULETTE #274 whose parameters included a thank you card, decoration colors, hands element, and tone on tone. I chose to make a shaped interactive card that features cartoon hands that clap.

Watch the process video to see how I made this card.

Cardbase:  I started with an 4.125×11-inch piece of white cardstock folded in half to form a top-fold cardbase. Trace around cartoon hand pattern, cut and use a black marker to outline the hand’s features as shown in the video above.

Clapping Hands Pop-Up:  Die cut main twist pop-up mechanism, the panel strip and two flag arms from Karen Burniston’s Little Twist Pop-Up die set. (Watch the assembly video located at the bottom of the linked die set.) Install twist panel pop-up as shown in the video above. Cut two sets of arms from the Spellbinder’s Classic Mouse dies and add to the flag arms as shown in the video above.

Sentiments: Die cut “thank you” and glue inside card. Sketch in pencil and then cover with a fine tipped black marker the sentiments on the thumbs.

Envelope:  The card fits into an A2 size envelope (4.125x 5.5-inches).

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Papers

  • White Cardstock
  • Fraser Papers for William House – A2 Envelope – Genesis Text Husk Smooth

Ink

  • Pigma – Mircon 05 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Fine Tip – Black

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Eraser
  • Scissors
  • Pencil
  • Paper Masking Tape

2025 ATC Calendar – July

I started a new challenge for 2025 – the ATC calendar challenge. With a group of crafty friends, we are making a new image on a 4.25×5.5-inch calendar card for each month.

July’s card is made with Stampin’ Up’s Notes & Totes dies and stamps.

Learn how I made this calendar by watching the video below.

To see other months’ calendars go to click here.

Click to see Lois Bak’s July calendar.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

___________________________________

Materials Used:


Dies
• Stampin’ Up – Stampin’ Cut & Emboss Dies – Notes & Totes

Stamps
• Stampin’ Up – Clear Stamps – Notes & Totes

Press Plates
• Spellbinders – BetterPress Plates – 2025 DIY Calendar


Papers
• Core’dinations – 12×12 Textured Cardstock – Vintage Collection – Blue
• Copper Mirror Cardstock
• Pink Textured Shimmer Cardstock
• White and Yellow Cardstock
• Spellbinders – BetterPress – 5.5 x 4.25” (A2) Cotton Card Panels – Porcelain & Pebble


Ink
• Concord & 9th – Premium Dye Ink – Powder
• Memento – Fad-Resistant Dye Ink – Tuxedo Black
• My Favorite Things – Premium Dye Ink – Lazy Day
• Spellbinders – BetterPress Ink – BetterPress Black
• Stampin’ Up – Classic Stampin’ Pad – Crushed Curry

Adhesives
Neutral PH Adhesive by LINECO
Fine-Tip Glue Bottle
• Scrapbook.com – Foam Tape – 1mm


Tools
• Die Cutting Machine
• Scissors
• We R Memories – Piercing Tool
• Blending Brush
• Paper Masking Tape

Adhesives
• The Paper Studio – Brads – Copper

S’more Funn Birthday Card

This card was made for CRAFT ROULETTE #273 whose parameters included a lady’s card, candy wrapper colors, camp(s)/(ing) element, and belt. I chose to make a trifold, slimline card that is interactive using Karen Burniston dies and some custom cut pieces of my own design.

Watch the process video to see how I made this card.

Cardbase:  The cardbase is a trifold, so there are three panels (I made mine out of 80lb black and 110lb white cardstock, but you could make it all out of 100 lb black.) I cut two black panels at 3.75×8.5-inches for the card back. One white 4.125 x6-inches (Score at 3.75-inches and at 3.875-inches.) Cut another white panel at 4.125×7-inches (Score at 3.75-inches.) Cut two thumb holes in each panel as shown in video using die from Whirly Wheel die set. Follow video above for assembly order of panels. (You can follow the video with cutting the waves into the white cardbase panels or you and just round the tops of the panels as I eventually did.)

Flame Panels:  Cut one 3.75×6-inch panel and one 3.75×7-inch panel. Using the waves die in the Curved Edges die set, cut the two panels with waves at the top. Cut two sets of five different fire colors using the waves die from 4×3-inch pieces of paper. Adhere the fire color pieces to the panels going from darkest to lightest colors. (I ended with a dark color next to custom cut and colored logs.)

Whirly Wheel Flames:  (Watch the assembly video located at the bottom of the linked Whirly Wheel die set.) Cut two sets of wheels, thermometer arms, and washers from heavy white cardstock. (I recommend adding the arrows before adding the clear packing tape by either using a marker and the die as a stencil or stamping using the Whirly Wheel Words stamp set.) Cover all die-cut pieces with clear packing tape. Assemble as shown in the video. Test flame shapes to add to Whirly Wheel arm making sure they stay within the card base when closed. Attach to arm as shown in video.

Marshmallow Sticks:  I drew my marshmallows on sticks on a piece of 8.5x 3.5-inch white cardstock. They were fussy cut and then the sticks were colored dark brown. The marshmallows were covered with Nellie’s Choice Snow Effects, allowed to dry and then colored with light brown and hints of black to make the bubbling, toasted look of the marshmallows. The sticks were fitted and folded to the card before gluing on to the card back.

Sentiment Pop-Up:  Die cut a white l-shaped mechanism from the Katherine Label Pop-Up die set. (Watch the assembly video located at the bottom of the linked die set.) Die cut in orange and red, the Happy Birthday and its shadow piece. Install the mechanism into card making sure it is high enough in the card not to interfere with the thumbholes. Color the top sides of the mechanism black to blend into the background. (I cut a 1.5×1.75-inch piece of black and colored afterwards. You could just color the three sides of the box part of the mechanism at this point.) Glue Happy Birthday onto its shadow and adhere to mechanism.

Sentiment Belt:  Cut an 11×2.5-inch strip of dark brown textured cardstock. Fold it around the card loosely so it can slide off. Glue together back edges. On a computer design a 2×2.75-inch brown panel that says “Dear Sweet Lady, Wishing you S’more Funn!” followed by instructions on how to operate the card. An additional instruction panel is added to the back of the belt.

Envelope:  The card fits into #10 business envelope (4.125x 9.5-inches).

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Bazzill – 8.5×11-inch Textured Cardstock – Bitter Chocolate
  • Orange, Reds and Yellow Cardstock
  • Scrapbook.com -8.5×11-inch 110lb Cardstock – White
  • The Paper Studio – 8.5×11-inch 80lb Cardstock – Black
  • #10 Business Envelope – Kraft

Ink

  • Sakura – Gelly Roll Pen – Medium – White
  • Sharpie – Permanent Marker – Fine Tip – Black, Red
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black
  • Stampin’ Up – Stampin’ Blends – Dark and Light Cooper Clay

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Craft Knife
  • Scissors
  • Pencil
  • Paper Masking Tape

Miscellaneous

  • Nellies Choice – Snow Effects

Rainbow Bridge Card

It’s the Karen Burniston design team challenge for July 2025 using the theme of Rainbow. I choose to make a sympathy card for a pet using the new Rainbow Add-Ons and the previously released Flip Frame Pop-Up, Cat and Dog, and Rectangles and Labels – Crosshatch die sets along with the Rainbow Greetings stamp set.

Watch the process video to see how I made this card.

Cardbase: I started with a purchased side-fold 4×6-inch A6 cardbase. Cover the four panels with decorative papers cut using the scalloped edge die in the Rectangles and Labels – Crosshatch set. Use the large frame die in the Flip Frame Pop-Up set to cut the card front frame. The dog comes from the Cat and Dog die set. I inked the white dog slightly with gray ink and used a fine tipped black marker to stencil in his face and paw areas.

Rainbow Flip Pop-Up: Watch the assembly videos for the Flip Frame Pop-Up and Rainbow Add-Ons located at the bottom of each linked die set.

Sentiments:  All the sentiments used on the card come from the Rainbow Greetings stamp set and are stamped in brown ink. They are cut out using the two smallest label dies in the Rectangles and Labels – Crosshatch set.

Envelope:  The card fits into an A6 (4×6-inches) size envelope.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Darice – 8.5×11-inch Single-Sided Paper – Green Prints
  • Concord & 9th – 8.5×11-inch Solid 80 lb Cardstock – Poppy, Marmalade, Buttercup, Clover, Peacock, Eggplant, Spout, Oceanside
  • Green and White Cardstock
  • Park Lane Paperie – A6 Cardbase & Envelope – Cream

Ink

  • Memento – Fade Resistant Dye ink – Espresso Truffle
  • Pigma – Mircon 01 Fine Tip Pen – Black
  • Ranger – Tim Holtz Distress Ink – Lost Shadow

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks
  • Scissors
  • Paper Masking Tape

Miscellaneous

  • Green Gem
  • Green Satin Bow

Whirly Wheel Projects

Here is a quick summary of cards using the new Karen Burniston Whirly Wheel die set.

(HINT: Click on the photo to go to the tutorial on how to make it.)

________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

________________________

Arch Pop-Up Projects

Here are some of the projects I’ve made with the new Karen Burniston Arch Pop-Up

(HINT: Click on photo to bring up tutorial on how the project was made.)

________________________

Thank you for experiencing this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊

________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

________________________

A Double Whirly Wheel Fishing Themed Father’s Day Card

Welcome to our Karen Burniston Products – KB Riley LLC June Release Blog Hop. The Design Team have come together with Karen today for a fun blog hop to celebrate the release of 10 new dies and 5 new stamp sets. Sneak peeks of the new release started last week, and the dies are available to order NOW! (Giveaway details at the end of post.)

For my double Whirly Wheel Father’s Day card, I used several of the new dies including the Fishing Lures Charms and Whirly Wheel.

Watch the process video to see how I made this card.

Cardbase:  From white 100 lb cardstock cut a 4×8.75-inch rectangle and a 3.75×8.75-inch rectangle. Score the white 4×8.75-inch rectangle down the long side .25-inch from the edge and fold up as a tab. From patterned cardstock cut a 3.75×8.75-inch rectangle. Assemble as shown in video above.

Cut decorator panels of patterned cardstock using the Long Rectangles – Crosshatch dies and glue inside the card.

Worms and Fish:  Cut the largest fish lure and tail of one of the other fish lures from the Fish Lures Charms die set. Glue tail onto large fish and trim excess off the tail piece. Trim off loop at fish’s mouth. Color with glitter brush markers. Cut eight worms from brown cardstock. Add details with a white gel pen. Cut one large silver hook and add to one worm for the card front.

Double Whirly Wheels:  Cut two wheels and two large thermometer arms from sturdy cardstock using the Whirly Wheel die set. Cut one washer form a sturdy cardstock. (Color doesn’t matter as it will be hidden.) Using stencil feature, ink on arrows on wheel. Assemble wheels as shown in video above.

The key to having double wheels is to glue the washers of each wheel to a separate front panel with a thin sheet of copier paper sandwiched between the two wheels to prevent any catchpoints.

Can of Worms:  Cut A 3×3.5-inch piece of silver mirror cardstock. Score the backside of the piece at .5, .75, 1, 1.25, 1.5, 1.75, 2, 2.25, 2.5 inches. From the same cardstock, emboss and then cut out a circle using the Circles – Crosshatch dies as shown in the video above. Assemble as shown in the video. Decorate with worms.

Sentiments:  The sentiments were stamped in black using the Fishing stamp set. The two smallest fancy label dies in the Rectangles and Labels – Crosshatch set were used for the sentiments.

Envelope:  The card fits into a #10 business envelope.

______________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

______________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

______________________________

Materials Used:

Dies

Stamps

Papers

  • Carta Bella – 12×12 Double-Sided Paper Collection – Gone Camping
  •  Hunkydory – A4 Mirri Sheets of Cardstock – Oxidised Metals Collection
  • Brown Cardstock
  • White Cardstock
  • #10 Business Envelope

Ink

  • Memento – Fade Resistant Dye ink – Tuxedo Black
  • Pigma – Mircon 08 Fine Tip Pen – Black
  • Sakura – Gelly Roll Pen – Medium – White
  • Scrapbook.com – Shimmer Glitter Brush Marker – Pretty Pink, Key Lime Green, Frosty Blue & White
  • Sharpie – Permanent Marker – Fine Tipped – Red

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Block
  • Scissors
  • Pencil
  • Paper Masking Tape
  • We R Memories – QuickStick

Miscellaneous

  • Recollection – Mini Brads
  • Clear Sequins

GIVEAWAY

To celebrate the release Karen Burniston and each of the Karen Burniston – KB Riley LLC Design Team members will be giving away a $25 Gift Certificate to some lucky person who comments on our blog posts, so make sure you join the hop and comment on everyone’s blog post. Winners will be randomly chosen from ALL of the blog hop comments received on our blog posts by Monday, 23rd June 2025. Lots of chances to win some goodies, so just leave a comment on this post or any other blog hop posts to enter! Don’t forget to leave some way for us to contact you, in case you are a lucky winner!

Karen Burniston

Lois Bak

Sue Small-Kreider – YOU ARE HERE

Frances Byrne

Jennifer Webster

Suzanne Smit

Nicky Foden

Sandy Diller