Interactive cards

Special Delivery Pop-Up Card

| ullycatdesigns

It’s Sneak Peak Week for Karen Burniston’s October 2024 release of new dies and sentiment stamps. These dies will be available for purchase on October 28, 2024 on the KB Riley LLC website.

For this baby card I used the new Postage Pop-Up die set and Special Delivery stamp set along with the previously released Baby Charms, Welcome and Mini Alphabet and Numbers die sets.

Watch the process video to see how I made this card.

Cardbase: Cut a 7 1/2 x 5-inch piece and three 7 x 5-inch pieces of decorative cardstock. Score and fold the larger piece at 7-inches to form a tab. Glue the tab to one of the other pieces of decorative cardstock to form a horizontal or landscape side-fold card.  Glue the remaining pieces to the inside of the card.

Pop-up Blocks: From the Postage Pop-Up die set, cut four of the square block pop-up mechanisms from kraft cardstock and four of the tabbed pull strips from the decorative cardstock to match the inside of cardstock of the card. Install as shown in the video.

Decorations:  The bottle, onesie outfit and duck are all cut using the Baby Charms die set.

Sentiments:  “My heart soars with joy for you” on the card front comes from the Special Delivery stamp set as does the “Made with Love” circle stamp on the card back.  The “Welcome Baby” inside is all die cut using the Mini Alphabet and Welcome die sets.

Envelope:  The card fits into an A7 (5 x 7-inch) size envelope. The back flap is decorated with a yellow die-cut duck from the Baby Charms set.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Carta Bella – 12×12 inch Double-Sided Cardstock – Farmhouse Living Collection – Farm Grown
  • Bazzill – 12×12 inch Cardstock – Sand Dollar
  • Craft Consortium – A4 Double-Sided Solids Cardstock – Little Red Robin
  • Craft Consortium – A4 Double-Sided Solids Cardstock – Tis The Season
  • White Cardstock
  • Recollections – A7 Cardbase and Envelope – Cream

Ink

  • Hero Arts – Alcohol-Marker Friendly Ink Pad – Intense Black
  • Ranger – Tim Holtz – Distress Ink – Fossilized Amber, Lost Shadow, Salty Ocean and Twisted Citron
  • Pigma – Mircon 005 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Ultra Fine Tip –Light Green, Orange and Yellow

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks
  • Scissors
  • Craft Mat
  • Sponge Daubers
  • Blending Brush
  • We R Memories – QuickStick
  • Paper Masking Tape

Snowflake Kisses and Warm Wishes

| ullycatdesigns

It’s Sneak Peak Week for Karen Burniston’s October 2024 release of new dies and sentiment stamps. These dies will be available for purchase on October 28, 2024 on the KB Riley LLC website.

Today’s card is an A2 size top-fold card that uses the new Snow Charms die set and Winter Hugs stamp set.

Watch the process video to see how this card was made.

Cardbase:  Fold in half an 11×4.25 inch piece of white cardstock to form a top-fold A2 (4.25×5.5 inch) size cardbase. Cover all four panels with rectangles of patterned paper using the largest die from the Rectangles – Crosshatch set. Cut a frame of white glitter cardstock using the same die and the next largest die and glue to the front panel.

Mug of Cocoa:  Using the Tea and Coffee Pop-Ups die set cut one mug from red cardstock covered with clear packing tape. Cut one of the largest snowflake in the Snow Charm set, snip off charm loop and cover with glitter gloss before gluing to mug center. Allow to dry before rounding/shaping mug with a bone folder. Cut from white shimmer cardstock the cupcake frosting piece from the Cupcake Add-Ons set and adhere to back of the mug with two small foam dots. Cut one steam piece from the Tea and Coffee Pop-Ups set from clear vellum.

Cut the mechanism piece and arm strip from the same patterned paper as inside of card. Cut a white crosshatch label from the Rectangles and Labels – Crosshatch set and trim off about 1/2-inch from long side. Glue the large piece of label onto the inside card floor centering it up against the fold. Glue the mechanism into card as instructed on the assembly video located at the bottom of this linked page. Attach arm to mechanism. Using a large foam dot adhere the mug to the front of mechanism. Glue vellum steam piece to arm making sure it is positioned so it does not peak-out of the card when it is closed.

Decorations: The card front decorations are from the Snow Charms set, along with some snowflake sequin mix elements. The inside spoon is from the Tea and Coffee Pop-Ups set.

Sentiments:  All the sentiments come from the Winter Hugs stamp set. All the fancy labels come from the Rectangles and Labels – Crosshatch die set. “Snowflake kisses & winter wishes” was stamped on clear vellum with StazOn ink and the whole label was covered with glitter gloss. The vellum was adhered to the card front using glue dots.

Envelope:  The card fits into an A2 (4.25x 5.5-inches) size envelope. The back flap was decorated with a hat from the Winter Animals set and mittens from the Snow Charms set.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Hot Off The Press – 8.5×11 inch Double-Sided Papers – Magnolia Blooms
  • PinkFresh Studio – Essentials 8.5×11 inch Glitter Cardstock – Glacier
  • Recollections – 8.5×11 White Gold Shimmer Cardstock
  • The Paper Studio – 8.5×11 Clear Vellum
  • Sliver Foil Cardstock
  • Black, Red and White Cardstock
  • A2 Envelope – Cream

Ink

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks used as paperweights
  • Scissors
  • Craft Knife
  • Pencil
  • T-Ruler
  • Paper Masking Tape
  • We R Memories – QuickStick

Miscellaneous

  • Buttons Galore & More – 28 Lilac Lane – Sequin Mix – Snowflakes

Poinsettia Pop-Up Christmas Card

| ullycatdesigns

It’s Sneak Peak Week for Karen Burniston’s October 2024 release of new dies and sentiment stamps. These dies will be available for purchase on October 28, 2024 on the KB Riley LLC website.

Today’s card is an A2 size Christmas card that uses the new die sets of Poinsettia and Merry Christmas Lorna Add-Ons along with Season of Cheer stamp set.

CARDBASE: Cut an 8×6-inch rectangle of a double-sided patterned paper and fold in half to form a top-fold 4×6-inch cardbase.

LORNA LABEL: Follow the assembly video for the Lorna Label Pop-Up but cut out a frame by sandwiching the largest decorator label inside the Lorna Label die. Glue the Merry Christmas Add-Ons frame to the Lorna Label frame and decorate with words from add-on set before gluing the Lorna label pop-up into the card.

POINSETTIA: From the Poinsettia die set, cut one of the large leaves die from green and another from red. Cut one red from smaller leaves die. Brush the edges of the leaves with ink slightly darker than the cardstock. Cut the small, dotted center piece once from red and once from yellow. Save the yellow dots to inlay into the red center. Glue the large red piece onto the large green piece and then top with smaller red piece. Make sure to alternate the leaves for full coverage. Adhere red and yellow flower center. Die cut five pine branches and two of the berry stems to add around the large flower.

SENTIMENTS: The Merry Christmas Lorna Add-On set has a holly leaves shadow die that is just the right size to stamp the word “and” onto and glue to the bottom tip of the Lorna Label frame. The “and” and “Happy New Year” are from the Season of Cheer stamp set. The fishtail banner is a die in the Lorna Label Pop-Up set. The holly leaves and berries are in the Merry Christmas Lorna Add-On set.

___________________________________

Thank you for reading this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Bazzill – 8.5×11 Cardstock – Gumdrop -5-5154
  • Carta Bella – 12×12 Double-Sided Cardstock – Flora No. 4 – Bold Stems
  • Fun Stampers Journey – 8.5×11 Cardstock – Cranberry Bliss
  • Cream and Yellow Cardstock

Ink

Adhesives

Tools

Miscellaneous

  • Red Organza Ribbon 1/4-inch wide

Reindeer Games

| ullycatdesigns

It’s Sneak Peak Week for Karen Burniston’s October 2024 release of new dies and sentiment stamps. These dies will be available for purchase on October 28, 2024 on the KB Riley LLC website.

This card was inspired by the age-old question pertaining to the Rudolph-The-Red-Nose-Reindeer song – What are reindeer games? My interpretation is Winter games Olympic style with Rudolph winning the sledding race!

Watch the process video to see how this card was made.

Cardbase: The cardbase is an A7 size (5 x 7-inch) purchased card base with decorative papers glued to the four panels. I used the largest rectangle in the Rectangles and Labels – Crosshatch die set to cover the inside of the card and leftover pieces for the outside of the card.

Finish Line Flag Pop-Ups: Two Photo Fans Pop-Ups were created using white cardstock brushed with glitter gloss the arms and decorator pieces. the arm decorator pieces were cut in black and the two sided flags come from the Pirate Ship Add-Ons set. (You can also find a single flag in the Castle Pop-Up set.)

Sitting Reindeer: The sitting reindeer uses the body of the Snowman Pop-Up with the face, antlers, legs and tail from the Penguin and Reindeer Snowman Add-Ons set. The sled is from the Snow Charms set. (If I were to make this card again I would make two sleds and glue them into the card first, placing them so they overlap under the reindeer trimming off the excess front and back sled pieces before gluing the reindeer base over them and into the card.)

Standing Reindeer: Two reindeer were cut using the Christmas Animals die set. One reindeer is assembled on the reverse side so that the reindeer can face each other.

Sentiments: “Reindeer Games” was created using the Mini Alphabet die set while the inside “You’re so Cool” was stamped on a fancy label from the Rectangles and Labels – Crosshatch set with a stamp from the Winter Hugs stamp set. The “Made with Love” circle image on the back of the card is from the Special Delivery stamp set. The blank personal message label is also from the Rectangles and Labels – Crosshatch set. (I didn’t have a piece of matching cardstock wide enough for this label die, so I elected to center the die and cut with flat top and bottom of the label.)

Envelope:  The card fits into an A7 size envelope with the back flap decorated with leftover blue flags.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Carnation Crafts – Merry and Bright from PaperCrafter issue 40
  • Echo Park – 12×12 Double-Sided Cardstock – Bundle of Joy -Peek-A-Boo
  • Silver Foil Cardstock
  • Black, Browns, Cream, Teal Blue, White and Yellows Cardstock
  • Park Lane Paperie – A7 Cardbase and Envelope – White

Ink

  • Hero Arts – Alcohol-Marker Friendly Ink Pad – Intense Black
  • Ranger – Tim Holtz – Distress Ink- Scorched Timber
  • Pigma – Mircon 005 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black and Red
  • Sakura – Gelly Roll Pen – Medium – White

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Paperweight
  • Stamping Blocks used as paperweights
  • Scissors
  • We R Memories – QuickStick
  • Sponge Dauber
  • Paper Masking Tape
  • Glue Eraser
  • Pencil

World Card Making Day Card

| ullycatdesigns

This card was made to celebrate World Card Making Day and Craft Roulette episode #235 whose parameters were: not a single-fold A2 size card, mood board colors, world element and star.

I cased a card I had previously made and posted back on September 30, 2024 changing the patterned papers, scarf/steering wheel colors and adding a star to the plane’s tail. This card uses Simon Says Stamp! Stamptember with Riley & Company’s Fly By stamp set. (The Simon Says Stamp! Fly BY is sold out, but you can use this Riley & Co. Airplane Riley stamp set instead.) It also uses pop-up dies by Karen Burniston.

Watch the video to see how this card was made.

INSIDE: Plane and banner are interactive because they are on Karen Burniston’s Katherine Label Pop-Ups. The plane moves left and the banner moves right as the card is opened. The window frames on the card front panel were created from dies in Karen Burniston’s Twist Panel Pop-Up.

SENTIMENTS are all from the Riley & Company’s Fly By stamp set. “Flying by to say…Happy Birthday” and “Life is a journey. Enjoy the flight.”

CARD BACK: Signature and Craft Roulette inspired for World Card Making Day stamp with aviator’s cap.

ENVELOPE: Card fits into an A7 5×7-inch envelope stamped with “Your plane awesome: and some clouds.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Riley & Company and Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Stamperia – 8×8 Double-Sided Cardstock – Land of Pharaohs
  • Stamperia – 8×8 Double-Sided Cardstock – Voyages Fantastiques – Backgrounds Selection
  • Clear Plastic Packaging
  • White Cardstock
  • White A7 Envelope

Ink

  • Hero Arts – Alcohol-Marker friendly Ink – Intense Black
  • Creative Craft Products – Alcohol Markers – Dual Tipped – 15 Geranium, 95 Burnt Sienna, 97 Rose Beige, WG1 Warm Grey, WG3 Warm Grey
  • Mont Marte – Dual Tip Art marker – E2 Raw Sienna
  • Nuvo – Alcohol-Marker – 428 Blueprint
  • Pigma – Mircon 005 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black

Adhesives

Tools

  • Die Cutting Machine
  • Scoring Board
  • Bone Folder
  • Paperweight
  • Stamping Platform
  • Brutus Monroe – Stick & Stamp Mat
  • LDRS – Stampendable Stamping Tool
  • Stamp Shammy
  • Scissors
  • Pencil
  • T-Ruler
  • Paper Masking Tape
  • Large Needle

Miscellaneous

  • Thin Cotton String/Thread

A Haunted Chair In The Pumpkin Patch

| ullycatdesigns

It’s time for the October 2024 Karen Burniston Design Team Challenge with the theme of a haunted location. I chosen an Adirondack chair in a pumpkin patch to be haunted.

Watch the process video to see how the card was assembled.

Cardbase: Cut two 5 1/2 x 11-inch rectangles from black cardstock. Fold each rectangle in half to form two 5 1/2-inch square top fold cards. Two pieces of patterned paper from Graphic 45 were used to cover the inside floor and front card cover.

Adirondack Chair: Watch the assembly video for the Adirondack Chair located at the bottom of the linked page.

Ghost Mechanism: Watch the assembly video for the Spinner Square Pop-Up located at the bottom of the linked page. The ghosts are from the Halloween Charms set and were cut once from white cardstock and had their eyes and mouth stenciled on using the die. They also were cut from glow-in-the-dark paper for their backs and to hide the black mechanism arm.

Decorations: The large pumpkins are from the Autumn Elements set and the smaller jack-o-lantern and green hands are from the Halloween Elements set. The background pumpkins were cut from the Graphic 45 papers. The black cat on the chair is from the Skeleton and Bat set. The Slim Pattern Plate – Spiders was cut from pearlescent vellum and the spiders colored black. Then it was placed on the diagonal on the card front.

Sentiments: The card front uses the “Happy Halloween” from the Halloween Charms set while the inside uses a Spellbinders BetterPress “Happy Haunting” sentiment. Other inside sentiments – “Boo!” “Sit for a spell” and “Hey Pumpkin” – are cut from the Graphic 45 papers.

Envelope: The card will fit into a 6×6-inch square envelope or a 6×9-inch catalog envelope.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Press Plates

  • Spellbinders – BetterPress Letterpress System – Press Plate & Die Set – Halloween Icons

Papers

  • Graphic 45 – 8×8 Double-Sided Paper – Charmed
  • Lawn Fawn – 8.5×11 Lawn Fawndamentals – Pearlescent Vellum
  • Stampin’ Up – 6×6 Specialty Paper – Glow-In-The-Dark
  • Thin Clear Cello Packaging
  • Black, Orange, Purple, White Cardstock
  • 6×6 Brown Envelope

Ink

  • Spectrum Noir – Shimmer Gold Series Pearlescent Pigment – Peach Terracotta
  • Ranger – Tim Holtz – Distress Ink- Gathered Twigs
  • Pigma – Mircon 005 Fine Tip Pen – Black
  • Sharpie – Permanent Marker – Chisel Tip – Black
  • Sharpie – Permanent Marker – Fine Tip – Green
  • Sharpie – Permanent Marker – Ultra Fine Tip – Black
  • Sakura – Gelly Roll Pen – Medium – White

Adhesives

Tools

  • Die Cutting Machine
  • Bone Folder
  • Stamping Blocks used as paperweights
  • Scissors
  • Pencil
  • We R Memories – QuickStick
  • Tweezers
  • Metal Ruler
  • T-Ruler
  • Glue Eraser
  • Craft Mat
  • Sponge Daubers
  • Blending Brush
  • Paper Masking Tape

Flying By Pop-up Birthday Card

| ullycatdesigns

This card was made to celebrate Simon Says Stamp! Stamptember with Riley & Company’s Fly By stamp set. (The Simon Says Stamp! Fly BY is sold out, but you can use this Riley & Co. Airplane Riley stamp set instead.) It also uses pop-up dies by Karen Burniston.

Watch the video to see how this card was made.

___________________________________

Thank you for experiencing this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊

___________________________________

Disclaimer: Riley & Company and Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Stamperia – 8×8 Double-Sided Cardstock – Land of Pharaohs
  • Stamperia – 8×8 Double-Sided Cardstock – Voyages Fantastiques – Backgrounds Selection
  • Grafix – 8.5×11 Dura-Lar Acetate .005 – Clear Film
  • Silver Matte Paper
  • White Cardstock
  • White A7 Envelope

Ink

  • Hero Arts – Alcohol-Marker friendly Ink – Intense Black
  • StazOn – Solvent Ink – Jet Black
  • American Crafts – Metallic Marker – Silver
  • Creative Craft Products – Alcohol Markers – Dual Tipped – 15 Geranium, 95 Burnt Sienna, 97 Rose Beige, 120 Black, WG1 Warm Grey, WG5 Warm Grey
  • Mont Marte – Dual Tip Art marker – E2 Raw Sienna, E5 Burnt Sienna
  • Pigma – Mircon 005 Fine Tip Pen – Black

Adhesives

Tools

  • Die Cutting Machine
  • Scoring Board
  • Bone Folder
  • Paperweight
  • Stamping Platform
  • Brutus Monroe – Stick & Stamp Mat
  • LDRS – Stampendable Stamping Tool
  • Stamp Shammy
  • Scissors
  • Pencil
  • T-Ruler
  • Paper Masking Tape
  • Large Needle

Miscellaneous

  • Thin Cotton String/Thread

A Peanuts Pumpkin Patch Pop-Up Card

| ullycatdesigns

After making a card in Karen Burniston‘s Virtual Card class for September 2024, I made a Halloween version of the card using papers from http://www.Craftstash.us.

Watch the assembly video below.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Papers

  • Craftstash – Ephemera Pack – Peanuts Halloween
  • Craftstash – 8×8 Single-Sided Cardstock – Peanuts Halloween
  • Black and White Cardstock
  • A7 White Envelope

Ink

Adhesives

Tools

  • Die Cutting Machine
  • Bone Folder
  • Paperweight
  • Scissors
  • Pencil
  • Metal Ruler
  • Craft Clips
  • Paper Masking Tape

Fireplaces in Review

| ullycatdesigns

I have been collecting and making fireplace cards for several years now. Here is a collection of all my fireplace blog posts. Click on an image to see details of the fireplace.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.