Leaves

Thanksgiving Basket

| ullycatdesigns

Being thankful for friends, family and a good harvest is what this basket pop-up card is all about.

This pop-up Thanksgiving card features some of Karen Burniston’s December 2022 release die sets – Wide Woven Basket Box Card and Bam Box.

Wide Woven Basket: This die set makes it easy to create a rectangular pop-up basket. (Prior to this set you had to die cut an extra set of pieces to widen the basket sides and grass. See video.) When used with the previously released Woven Basket Box Card, you cut two sets of the original size sides and two sets of the wide size sides. Follow the directions on the package or the assembly video to weave the basket and join the sides together. (I cut four rope handles because my cardstock was printed on the back side – so two ropes glued together.)

Crossbars of Grass: The Wide Woven Basket Box Card includes the wide grass crossbars used to attach the various balls. (I cut four to make a full basket and glued them in rather than tucked as suggested in the video.)

Autumn Elements: The leaves, vine, pumpkin and acorns are all from a previously released Karen Burniston Autumn Elements die set. (I didn’t do a test layout of my leaves with the basket folded closed overt the envelope, hence the folded tips of leaves to fit into the envelope.)

Sentiment: The “Happy Thanksgiving” is from the Karen Burniston Autumn word set. It is a single layer of a contrasting color from the basket. For the matted label on the back of the basket, I used the large rectangle and the smaller stitched rectangle from Karen Burniston’s Slim Frames set. This label is for a personal message.

Bam Boxes: To animate the basket when it comes out of the envelope and pops into shape, two small “Bam Boxes” were used. (Bam Box assembly video)These easy to make, rectangular boxes are powered by a small rubber band. (I used #8 size bands.) These go in diagonally opposite corners of the basket. Once glued in, the basket will only fold flat in one direction. (I recommend using a heavy weight cardstock for bam boxes and letting each stage of gluing dry before moving onto the next step.)

Envelope: As with all my cards that are sent in an envelope, I have stamped the back flap. This time it is stamped with my main sentiment. This is an A7 envelope.

Thank you for reading this blog post. Please like and leave comments 😊

Materials Used:

Dies

Papers

  • Rubberneck – 6 x6 Paper Pad Double-Sided Papers 80# Cardstock – Autumn Leaves
  • A7 White Envelope

Inks & Stamps

  • Catherine Pooler – Premium Dye Ink – Spa Collection – Mandarin Spice
  • Stampin’ Up – Classic Stamping Pad -Crushed Curry and Pumpkin Pie
  • Crafter’s Companion – Nature’s Garden – Autumn Blessings Collection

Miscellaneous

Thanksgiving Leaves

| ullycatdesigns

November winds are working the last of the leaves off the trees as we go to celebrate Thanksgiving.

A fun little pop-up card using Karen Burniston dies and some thread to dangle fallen leaves from in the two open ovals. The pop-up mechanism, small trees, small ovals, and grass are from the Oval Frames Pop-up set.

The leaves and large tree are from the Tiny Trees Pop-up set. And the large oval and frame are made using the Oval Crosshatch dies. While acorns are from the Autumn Elements die set, the grass pieces are scraps from another project.

I glued two leaves together with a bit of cotton thread between them and then sandwiched the threads between two of the oval pop-up frames.

The sentiment is cut from two different shades of brown using the Autumn word set.

For a place to write a personal message, I used medium crosshatched ovals with two leaves as decoration.

As with all my cards that are sent in an envelope, I have decorated the back flap with a large oak leaf from the Autumn Elements die set.

Thank you for reading this blog post. Please like and leave comments 😊

Materials Used:

Dies

Papers

  • Rubberneck – 6 x6 Paper Pad Double-Sided Papers 80# Cardstock – Autumn Leaves
  • A2 Brown Kraft Paper Card and Envelope

Miscellaneous

  • White Cotton Thread

A Pumpkin Patch Kind of Halloween

| ullycatdesigns

Here is a quick layered card for Halloween or Fall greetings using one of the Birch Press layered designs.  It went together in less than an hour.

First decide on your colors. I knew orange for the pumpkins and then decided on autumn leaf colors for the four layers needed.  The dies cut an A2 size panel (4 ¼ x 5 ½ inches), I decided to go for a 5 x 7 inches card, so I also cut a 5 x 7 inches rectangle of an orange card stock and a mat layer of Terra Cotta card stock at 4 ½ x 6 ½ inches.

I cut layer A from Lemon, layer B from Terra Cotta and layer C from Orange. All the layers will give you lovely small leaves as off-cuts, but layer B also gives you large, veined leaves that can be used to decorate your card or save for other projects. You will want to cut a fourth layer for the backing. I cut my 4 ¼ x 5 ½ inches backing from Pumpkin Bread cardstock.

Using a green fine-tip marker, I colored in the pumpkin vine leaves and vine once the layers were all glued up.  (Another alternative would be to cut same green squares of paper to cover behind the lemon layer the pumpkin leaves.)

The sentiment was an extra one left from another project using Karen Burniston’s Halloween Charms.

Because the card has so many layers, I have opted to leave it as a single layer -postcard style card that will fit in an A7 envelope as it is too thick to send as a postcard.

Hope you enjoyed this quick card. If so, please comment and like and follow this blog. 😊

Supplies used:

Day 4 of Mini Challenge – Autumn Leaves and Letting Go

| ullycatdesigns

This is the fourth and final day of the challenge I set myself to make five cards with the Autumn Days stamp set from the most recent Simply Cards and Papercrafts magazine.

There was a terrible rain storm going on outside when I started stamping with the Autumn Days stamp set from the most recent Simply Cards and Papercrafts magazine. I made a number of backgrounds using a color palette ranging from a mustard yellow to a muddy red. This card uses one made with the tiny individual leaf stamps and the pile of leaves stamp.

The sentiment was heat embossed in a shiny black on light orange cardstock, fussy cut and raised up with foam pads.

Using a large sycamore leaf stamp, I stamped the envelope flap in brown ink.

This will make a lovely Thanksgiving card with plenty of space inside for a personal note.

DAY 1 – Winter Joys

DAY 2 – Looking Up and Letting Go

DAY 3 – N is for Nuts

Day 4 – Autumn Leaves and Letting Go

Supplies:

Stamps

Papers

Inks/Embossing Powder

Miscellaneous

Day 2 of Mini Challenge – Looking Up and Letting Go

| ullycatdesigns

Walking in the woods you smell the crisp fall air and looking up see the falling leaves swirling down from the treetops. This is the memory I hope this card evokes.

This is Day 2 of the challenge I set myself to make five cards with the Autumn Days stamp set from the most recent Simply Cards and Papercrafts magazine.

I had stamped a bunch of backgrounds with the Autumn Days stamp set from the most recent Simply Cards and Papercrafts magazine a color palette ranging from a bright yellow to a muddy red. This card uses one made with the tiny individual leaf stamps and the single tree stamp. The background was inspired by a card I had seen on Craftworld.com by Mandy78.

The sentiment and leaves were heat embossed in a shiny black on several shades of orange cardstock, fussy cut and adhered with foam pads.

This will make a lovely Thanksgiving card with plenty of space inside for a personal note.

Using a large sycamore leaf stamp, I stamped the envelope flap in brown ink.

DAY 1 – Winter Joys

DAY 2 – Looking Up and Letting Go

DAY 3 – N is for Nuts

DAY 4 – Autumn Leaves and Letting Go

Supplies:

Stamps

Papers

Inks/Embossing Powder

Miscellaneous

Give Thanks

| ullycatdesigns

Pumkin-frontAutumn leaves are falling.  This simple shadow box card is made using Hunkydory -Moonstone Shadow Box Frame Die Set -MSTONE076, LDRS creative’s Happy Fall Sentiments stamp set, Fiskars Oak Leaf punch and Spellbinders Jack-O-Lantern die set. The finished size is 3 inches x 4 inches by 1 inch.Pumkin-side

Using only one panel in the shadow box with the pumpkin cut twice from heavy cardstock and adhered with a strip of foam tape between each pumpkin to create dimension, makes for a simple decoration. The top pumpkin was lightly rubbed with Ranger Distress Ink -Vintage Photo and a the stem and vine cut from brown paper. The tiny oak leaves create a wreath on the front of the card. (Oak Leaves were cut from scrap paper using a Fiskars tiny punch.) A plaid paper from Authentique – Pioneer-Plaid THA005-355057 completes the front. The sentiments are stamped on white cardstock with Stampin’ Up Chocolate Chip Ink Pad. American Crafts’ Sticky Thumb Double-sided Super Sticky Red Tape – 1/8 inch was used to assemble the shadow box while Tombow Multi Mono Liquid Glue wasused to adhere leaves and sentiments.