Using the Pink Fresh Studio slimline circle apertures dies with the My Favorite Things 2-inch circle shaker pouches works well. The only thing I had to do was to snip in between each scallop to allow the pouch to fit through. I cut the circles apart and rounded the corners. Had to use some teal mirror card to suggest water or sky. After gluing the teal mirror card and lemon-yellow layer together, I glued the shaker pouches to the lemon-yellow layer, filled the pouches and then glued the pale-yellow backing to each. (Remember to use an antic static pad to wipe the inside of pouch to cut down on the static cling of sequins to the plastic.)
The Towers die set comes with all the rectangular matting layer panels. The base card is cut in a grapefruit orange and the panels are in a pale yellow and a lemon yellow.
The stars/suns are made from the Made to SurpriseExcellent Edges die set by cutting the bottom star from orange and the top from pale yellow. The tiny 3D red and pink flowers and greenery are decorative elements I had left over from another project and are cut from the Spellbinders3D Fun Time Cruiser die set.
Finishing touches are the stamping of the sentiment and the back-envelope flap from the What the Doodle Sun stamp set.
This card was created to compliment an autumn birthday teepee card I had made earlier which was done in oranges and browns. This one plays off the orange by using the contrasting color of blue with accents of browns and green. The recipient likes to fish so I used a fishing stamp set by Stampin’ Up and papers from my storage box of “masculine papers” (brands listed under supplies.)
Teepee cards-so named because of the shape, are easy cards to construct from three squares of cardstock that are all the same. You score each diagonally from one point to the opposite point and fold in half to form a triangle. Then you glue one of the squares to the left side triangle and another square to the right side of the triangle/center square. I recommend watch Sam Calcott’s Mixed up Crafts video for a step by step. (My card base is made up of three 5 ¾ inches squares of double-sided paper by Craft Consortium.) I cut three 5 ½ inch squares of green paper by Graphic 45 and then diagonally cut the square to get the 5 triangles I needed for the middle mat layer.
Once again, I want to have peek-a-boo-doors on the teepee card, so I added two flaps using the smallest and the medium circle dies in the Lawn Fawn circle flaps dies set cut into the top layer of triangular cut paper. Because I wanted to use the doors as platforms to set a hook and a large fish on, I used pop-out cubes to make them stand away from the card base.(My card used patterned blue paper by Authentique cut from 5 ¼ inch squares.) I also cut two additional circle flaps from the same blue paper to cover the back sides of the flap doors and squares to inlay behind the flap door matching the pattern. The pop-up cube to support an object is common, but I really learned the power of it from Karen Burniston’s Frame Pull Pop-up.
I fussy cut all of the card’s stamped images and sentiments after I had use watercolor pencils to color them. The happy Birthday rosette is made from a foiled topper from a card kit and ribbon gathered by needle and thread and then glued to the back of the topper.
The back side of the card has a cream-colored triangle for a personal message. The card is secured with a hook and loop square glued to one corner of the back flap and the connecting triangle.
I intended to have this card fold flat to fit inside a catalog envelope (9 inches x 6 inches) but I put the fisherman with his long pole and fishing line on the wrong panel. (Yes, it is real fishing line glued between two layers of the stamped fisherman and pole). The fisherman and the fish should have been where the other is, so that when folded flat the overlap lays on the cream panel so it will fit into a 9 x 6 inch envelope. But this card will be mailed in a larger padded envelope with a small diagram so the recipient will know how to stand it up for display and for good CRX. The back of the envelope is stamped with a fish.
The funny thing about these stamps was I thought I had lost them in my last move, but a few days ago the battered box they were in caught my eye as I was looking for something else on my craft shelves. My great aunt who had been a schoolteacher from the 1920s-1960s had given the original of the stamps to my siblings and I. My father having a machine to make rubber stamps, was able to duplicate the stamps so that each of the children in my family could have our own set.
As I reacquainted myself with these stamps, I found the lady who I always made ride the prancing horse and the flying trapeze artist. There was my favorite stamp – the cage wagon in which I could stamp whatever animal I wanted to be in the cage. There were seals and bears balancing balls and a dog that would jump through a paper covered hoop. This was definitely a circus from another era with different notions of how to treat animals.
Because I could not find any suitable red and white striped paper in my stash, I used Adobe Illustrator to create the striped paper I needed and to create a number of versions and sizes of the circus sign.
Because the slimline card is 4 inches by 9 inches, it will fit into a #10 business size envelope. With this long and narrow card, I could make my 3-ring circus with two spinners and the flying trapeze artist using nesting circle dies to cut out the three circles and created decorative rings to frame the cut-out circles. I should have taped my two sheets of stripped cardstock together and cut all three holes on both sheets at the same time having them lined up. (I made the mistake of cutting first one and then having to tracing the holes on to the second sheet.) (NOTE:Don’t glue your backing paper to your front until you attach the spinners.)
I highly recommend watching the spinner videos by Sam Calcott before making one. I used black sewing thread for this card using 2 to 4 strands for the spinners. (NOTE:Don’t glue your backing paper to your front until you attach the spinners.) I also stamped reverse images of the three stamps I wanted for spinners/swingers using a gellie plate. (Sam demonstrates in one of her other videos how to make the reverse image. Sorry I don’t remember which video, but it involves giraffes.) I used the printable glitter paper because it is glitzy, but also it hides bad stamping better.
Having learned a few tricks since I had last played with these stamps, I masked off parts of the cage wagon before I stamped the bull lion (We always called this stylized creature the bull lion because we didn’t really know which it was.)
I cut a white stitched rectangle from a Lawn Fawn die set to use as a place for a personal message.
To active the spinners, you must twist them before closing the card and placing in the envelope. They will spin when the card is open.