This card was made for Craft Roulette #265 whose parameters included an A7 card, floral wreath colors, lyrics element, and cinco (5). I used a Funny Bone Stamps by Riley & Co. along with a Karen Burniston die set released by Elizabeth Craft Designs.
Watch the process video to see how I made this card.
___________________________________
Thank you for experiencing this blog post.
I hope this inspires you and makes you smile.
Please like and leave comments
___________________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
Materials Used:
Dies
Elizabeth Craft Designs – Karen Burniston Pop It Ups – Oval Pull Card – 1109
Stamps
Riley & Co. – Funny Bones – Clear Stamp – A Year Older – RWD-1144
Riley & Co. – Funny Bones – Rubber Stamp – Happy Birthday To You – RWD-1251
Papers
Stampin’Up – 12×12-inch Designer Series Paper – Masterfully Made
This card was made for Craft Roulette #265 whose parameters included gift card, train colors, science element, and add a flower. I used a Craft Roulette stamp set and three Karen Burnistondies die sets.
Watch the process video to see how I made this card.
Cardbase: Using Karen Burniston’s Tag Book Pop-Up die set, I cut two of the large tag frames from oxidized blue mirror cardstock and two more from oxidized copper-colored mirror cardstock. The rectangular hinge die I cut once from white cardstock.
Pop-Up Panels: I glued my thin decorated paper to a piece of thin white cardstock and let dry before cutting out the Flower Pivot Panels piece. (Follow the assembly instructions in her video on the die set’s linked page.) The six small flowers are cut from solid colored cardstock scraps using the dies from the same die set as the panels.
Sentiments: The framed “Happy Birthday” on the tag front is from the Happy Birthday Lorna Add-Ons die set. The stamped “itty bitty gift” on the back tag pocket is in brown ink using the Craft Roulette Funn Sentiments #01 stamp set.
Envelope: The card fits into a purchased A6 (4.5x 6-inches) size envelope or larger.
___________________________________
Thank you for experiencing this blog post.
I hope this inspires you and makes you smile.
Please like and leave comments
___________________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
This card was made for Craft Roulette #264 whose parameters included a card for an influencer, dreamy colors, crafts/crafters, and off center.
Watch the process video to see how I made this card.
Cardbase: Cut an 8.5×11-inch piece of heavy white cardstock into two pieces that at 4.25×11-inches. Score and fold in half at 5.5-inches both pieces. On one piece score and fold at 2.75-inches. Glue the two cards together with the large rectangle panels overlapping as shown in the video. Cards: Because this card is going to Mary Gunn, I used images from her Craft Roulette Community Showcase gallery, picking cards that are iconic to the show. I tried to recreate some of the fun folds and bookmark cards.
Guide Sheet to Cards: This sheet is folded and tucked in a pocket on the back of the card.
Envelope: The card fits into an A2 (4.25x 5.5-inches) size envelope.
________________________________
Thank you for experiencing this blog post.
I hope this inspires you and makes you smile.
Please like and leave comments 😊
______________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
This card was made for Craft Roulette #263 whose parameters included a sending sunshine card, spring colors, rodent(s), and shiny.
Watch the process video to see how I made this card.
Back of Card
Cardbase: Start with an 8.5×11-inch sheet of white cardstock. Score and fold at 5.5-inches and at 2.75-inches. Cover the large inside panel with decorative papers as well as the two long and narrow front panels. use scraps to decorate the back panel.
Mice: Stamp The two large mice and one small mouse holding a star from the two Colorado Craft Company stamp sets – A Star is Born and Falling Star. Color with watercolor pencils and smooth coloring with a water brush. let dry before gluing large mice to bottom half of easel. Stamp a second small mouse to cut out star as a pattern to cut star from silver glitter paper. Cut out small mouse’s hand to slide silver star under it. Glue star in place. Attach mouse to card base with foam dots.
Stars: Using two pieces of clear plastic cut from packaging, make a T or cross shape using glue dots. Cut stars from silver foil cardstock using coordinating dies from the stamp sets and attach with glue dots to plastic. Attach cross to back of card easel base with double-sided tape. Glue on three stars to decorate front of card.
Sentiments: The sentiments were all stamped in black ink using the two Colorado Craft Company stamp sets and fussy cut around. The small fancy label was cut from white cardstock using Karen Burnston’s Rectangles and Labels – Crosshatch die set.
Envelope: The card fits into a catalog (6×9-inch) size envelope stamped with a sentiment and stars from the Colorado Craft Company’s A Star Is Born stamp set.
_______________________________________
Thank you for experiencing this blog post.
I hope this inspires you and makes you smile.
Please like and leave comments 😊
____________________________________
Disclaimer:Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
Stamps • Colorado Craft Company – Clear Stamps & Metal Dies by Anita Jarem – A Star Is Born – AJ587 • Colorado Craft Company – Clear Stamps & Metal Dies by Anita Jarem – Falling Star – AJ585
Papers • Impression Obsession – 6×6-inch Double-Sided Paper Pack – Basics 1 – Yellows • Silver Foil and Glitter Cardstock • White Cardstock • Catalog Envelope – White • Clear Plastic Packaging
Ink • Memento – Fade Resistant Dye ink – Tuxedo Black • Sharpie – Permanent Marker – Ultra Fine Tip – Black • Sharpie – Permanent Marker –Fine Tip – Yellow • Nuvo – Watercolour Pencils – Hair & Skin Tones
Needing multiples of the same card layout, I made 16 cards for a dog lover’s card swap using one Echo Park Paper Company’s collection kit I Love My Dog and Karen Burniston’sFlip Frame Pop-UpandHellodie sets.
Watch the video for instructions on the construction of the cards.
Read more below on specifics of this card layout.
Cardbase: From each sheet of 12×12-inch cardstock, cut two 5.5×8.5-inch panels. Fold each panel in half to form a 4.5×5.5 cardbase.
Flip Frame Pop-Up: Watch the assembly video for the Flip Frame Pop-Up located at the bottom of the linked page. Cut one mechanism from matching cardstock to the card inside. Cut the journaling card down to 3 .75-inches tall x 3 inches wide. Glue mechanism and journaling card into card base as shown in video above.
Sentiments: The die cut shadow and word “Hello” on the card front are by Karen Burniston. All the flip panels with sentiments are journaling cards from the paper collection. A personalized inside sentiment panel will be added to the inside right panel.
Envelope: These cards fit into an A2 (4.25×5.5-inch) envelope. The envelope flaps have been decorated with stickers from the kit.
___________________________________
Thank you for experiencing this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
___________________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
This card was made for Craft Roulette #262 whose parameters included a thank you card, 1950s colors, toast(s)/bread(s), and brown paper.
Watch the process video to see how I made this card.
Cardbase: Score and fold in half a8.5x 5.5 rectangle of silver mirror cardstock. From the Trinity Stamps Toaster Card die set, cut the toaster shaped die with its feet just slightly over the fold of the silver folded cardstock to form a toaster shaped card hinged at its feet.
Toaster: Cut one whole toaster from silver and another from gray cardstock. Cut enough of the toaster lever knob to have two knobs that are black on both sides. Glue the knobs to the inside of the toaster card’s left side near the feet. Using 1mm thick foam tape, place tape around the inside of the folded shaped toaster card to form a U shape with the opening is where the slot is. Attach the silver toaster over the foam tape to form a pocket with the slot as its opening. Repeat gluing in knob, adding foam tape and attaching the gray cardstock toaster to the other inside side of the card. Add double-sided tape to the back of some shiny black cardstock or junk mail before cutting out two of the spiraling squiggle from the Elizabeth Craft Designs Karen Burniston Merry Christmas Pop-Up and three of the toaster feet bar from Trinity Stamps Toaster Card die set. Adhere the squiggle stickers to the inside center of the silver toaster and to the back of the card’s toaster. Adhere the feet bar to the silver toasters. The gray cardstock should be without decorations.
Toast Cards: From brown kraft paper, cut two bread shaped cards using the die from the Trinity Stamps Toaster Card die set. Cut two small bread shapes using the smaller die in the set from white. Ink the inside edges and the whole outside of the brown cards with a dark brown ink. Lightly ink the edges of the white pieces. Stamp sentiments onto the front outside of cards and tops of white pieces before gluing the white to the inside of cards.
Sentiments: The toast cards’ sentiments were all stamped in brown ink using the Rubbernecker Thanks Set and Lawn Fawn’s Push Here stamps. The toaster card front has die cut letters cut from black cardstock/shiny junk mail backed with double-sided tape to form stickers. The “TOAST” word shadow was cut from white and adhered to silver mirror card with double-sided tape. All the die-cut sentiment is cut using the Trinity Toaster Card set.
Envelope: The card fits into an A7 (5x 7-inches) size envelope stamped on its flap a piece of bread with a heart using the Lawn Fawn Let’s Toast stamp set.
___________________________________________
Thank you for experiencing this blog post.
I hope this inspires you and makes you smile.
Please like and leave comments 😊
___________________________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
___________________________________________
Materials Used:
Dies • Elizabeth Craft Designs – Karen Burniston Pop It Ups – Merry Christmas Pop-Up • Trinity Stamps – Metal Dies – Toaster Card
This card was made for Craft Roulette #261 whose parameters included an A2 size card, amusement ride colors, JD element, and ticket(s).
Watch the process video to see how I made this card.
Cardbase: Start with a 4.25 x 11-inch piece of heavy cardstock, score at 5.5-inches and fold in half to form a top-fold A2 (4.25×5.5-inch) card. Cut a 4.25×6-inchpanel of heavy cardstock and score and fold at .5-inch to form a narrow tab. Glue the tab to one end of the A2 cardbase to form a tri-fold card. Using a 1-inch circle hole punch, cut notches out of each panel’s corners. Create a gold and white ticket for the front of the card as show in video.
Box of Chocolates: The easel stop is a heart shaped box of chocolates made using Trinity Stamps’ Bon Bon Box stamps & dies, colored using glitter markers and popped up on thin foam tape.
Sentiments: The “Ticket to Funn” was computer generated while the inside sentiments were stamped in dark brown ink using Craft Roulette’s Funn Sentiments #01 stamp set. All the stamping on the card back comes from Craft Roulette’s The Basics stamp set.
Envelope: The card fits into an A2 (4.25x 5.5-inches) size envelope stamped with a sentiments from Craft Roulette’s The Basics stamp set on the back flap in dark brown ink.
___________________________________
Thank you for experiencing this blog post.
I hope this inspires you and makes you smile.
Please like and leave comments 😊
___________________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
This card was made for Craft Roulette #259 whose parameters included a card with two folds, jelly bean colors, math element, and markers.
Watch the process video to see how I made this card.
Cardbase: Start with a 7 x 10-inch piece of cardstock and fold in half to form a side-fold A7 (7×5-inch) card. Cover the front and back panels with decorative papers. (I used the two largest rectangle dies in the Rectangles and Labels-Crosshatch die set to cut out a frame and two panels for the outside of the card.) Once the panels are covered, die-cut the thumb hole at the bottom center of both front and back panels.
Waterfall Pop-Up: Watch the assembly video for the Waterfall Card located at the bottom of the linked page. Cut four base squares, one base piece and pull strip from heavy solid color cardstock. Cut four large decorative squares, three larger decorative rectangles and one pull strip decorator stripe from decorative papers. Assemble as shown in video.
Sentiments: All the sentiments used on the card Spellbinders BetterPress sentiment strips. Numbers and Happy Birthday are from Karen Burniston’s Numbers, Happy Birthday and Shadow. “Again” is spelled using Karen’s Mini Alphabet.
Envelope: The card fits into an A7 (5x 7-inches) size envelope stamped with a sentiment from Karen Burniston’s Photo Memories stamp set on the back flap in black ink.
___________________________________
Thank you for experiencing this blog post.
I hope this inspires you and makes you smile.
Please like and leave comments 😊
___________________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
When needing a large number of birthday cards, making multiple inlay die-cut backgrounds is the way to go.
Watch the video below to see how I made these cards.
Cardbase: I made eight A2 size cardbases by folding 8.5×5.5-inch rectangles of white cardstock in half.
Card Front: The card front uses Concord & 9th’s Party Hats inlay die along with the slice of cake from Karen Burniston’s Big Birthday Charms.
Sentiments: The sentiments were stamped in black ink using the Craft Roulette’s Funn Sentiments #01 stamp set and Karen Burniston’s Celebrate, Happy Birthday and Shadow dies along with her Katherine Label Pop-Up die set.
Envelope: The card fits into an A3 (4.25x 5.5-inches) size envelope stamped with a sentiment or a hand-drawn heart.
___________________________________
Thank you for experiencing this blog post. I hope this inspires you and makes you smile. Please like and leave comments 😊
___________________________________
Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.
Ully Cat's World 