Dies R Us

Good Morning Farmstyle

| ullycatdesigns

Greetings it’s Sue here from the Dies R Us design team with a barn pop-up easel card.

Using PoppyStamps’ new Country Barn Pop Up Easel Set and lots of PoppyStamps’ Whittle animals and sun, this is an easy card to make.

Cut:

1 – largest barn die out of brown card stock

1 – middle barn die out of cream

1 – smallest barn die out of red (Save all the doors and windows cut out for the backing of the “X” frames)

2 – small “X” window from white

1 – doors “X” die out of white

1 – roof trim die out of white

1 – straight line out of white

Cut animals/sun and color with markers, black gel pen and Distress Ink.

Glue white “X” frames to doors and window cut outs to form doors. Glue on roof trim.

If you plan on having doors that open, ink blend the cream barn piece edges and door/window openings.  

Using clear tape, make hinges for all the doors and windows to open.

Position and glue cow to inside of barn. Glue barn to middle cream barn piece making sure not to glue any doors that are hinged to open. Glue flying chicken inside open barn door and other animals to front of barn.

Glue tab of brown base piece to back of cream piece. Test the barn in pop-up easel position. Using foam squares adhere green grass with eggs glued to them to the brown base to act as easel stops. Don’t have grass in front of the door that opens. Glue sun on to back of cream piece as if sun is rising behind the barn roof. (Make sure that sun top is no higher than the roof tip so card will fit in envelope.)

Stamp a sentiment on card base and back flap of envelope.

Hope this fun card has provided some inspiration for your crafting. 😊

SUPPLIES Used from Dies R Us:

Other Supplies:

  • Red, brown, cream and white cardstock
  • Foam squares
  • Clear tape
  • Scrap green paper for grass
  • Staples – Invitation Brights 24 lb.- Gummed Envelope – 4 3/8 x 5 3/4 inches
  • Crayola Signature Brush & Detail Dual-ended Markers
  • Simply Made Crafts by Helen Griffin – Fun Sentiments Stamp Set
  • Vintage goat stamp
  • Stampin’ Up – Early Espresso ink pad
  • Ranger – Distress Ink – Vintage Photo
  • Sponge dauber
  • Stamping platform
  • Scissors

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

A Toolbox Father’s Day

| ullycatdesigns

Hi, it’s Sue from the Dies R Us Design Team with an interactive Father’s Day card.

This card is made with Karen Burniston dies focusing on the Tool Charms and Tiny House Pop-Up dies in a 5 1/2 inch x 4 1/4 inch card base. (I used a kraft paper card base and its matching envelope.) My inspiration for this card comes from Sandy Diller.

It is simple to alter the tiny house into a toolbox by not attaching the roof and adding a side panel cut from the house die cut and then adding it to the crossbar. I used a hole punch to create the handle on the crossbar.

The tool charms are great for using up your tiny scraps. You don’t have to cut the full piece if you are piecing handles on to the silver mirror cardstock. Just cut enough beyond the piece to glue the other half onto. (I used white and brown ink to “age” my tools.)

Once you adhere the toolbox to the card’s inside fold, following the directions on the packaging, you can decorate the card as you want. (I used some woodgrain cardstock cut into planks as well a scrap that looked like a wooden candle holder and the pieces are on foam squares to add some dimension to the card.)

The “Happy Father’s Day” was cut from the words in Karen Burniston’s Word Set 1 – Greetings and Word Set 2 – Birthdays. Piecing Father and Day together from letters from various words in both sets. You could also use the new “Happy Father’s Day” sentiment by Karen Burniston.

Hope this fun card has provided some inspiration for your crafting. 😊

Other Father’s Day cards on my blog

A Tool Box Father’s Day

A Fishing Father’s Day

A Father’s Day Waterfall Pop-Up

A Work Bench Father’s Day Card

In-Vested Father’s Day Card

SUPPLIES Used from Dies R Us:

Other Supplies:

  • Wood grain and scratched medal cardstock
  • Colored and silver mirror cardstock scraps
  • Black fine tipped pen
  • Hampton Art ink pads
  • Stampin’ Up – Early Espresso ink pad
  • Sizzix World’s Best Dad stamp set
  • A2 sized kraft card base and matching envelope

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Happily Ever After

| ullycatdesigns

Hi, it’s Sue here from the Dies R Us Design Team with an interactive wedding card.

This card is primarily made with Karen Burniston dies focusing on the Cake Pop-Up in a 7 inch x 5 inch card base. (I used an off-white shimmer card stock for the inside of the card and took mica spray-painted shimmer card panels for the front and back of the card.)

Cut out two of each of the cake tier pieces, two of the three scalloped edging pieces and two of the bride and groom piece. (I used shimmer cardstock for all but the groom pieces.) Fold tier pieces on scored lines as shown in the video. Glue each tier together following the video.

It is easier to decorate the cake before attaching it to the card. (I added some embellishment drops to the scalloped edges that needed to dry overnight.) Glue one set of bride and groom together on to tab at cake top. Glue the second set on to back side of cake top. Adhere the scalloped edging on to each tier of cake, starting and stopping each scalloped piece at the center fold of each tier.

Cut a 3 1/4 inch circle from silver mirror and then cut a 2 1/4 inch circle from the center of the larger circle. Cut in half and glue on either side of the card base fold. Play with the layout of your decorative pieces before gluing the cake to the silver circle. Align the cake center fold with the card base fold. Place glue on the lowest tier’s folded tabs and glue in place. Fold card closed and firmly press cake to card base. Wait until glue has set to open.

I used the fancy layered label and tiny hearts dies from the Paper Frames Pop-Up set to decorate the inside of the card. (To make the tiny hearts be visible I coated them in a peachy translucent embellishment drops that had to dry overnight.)

The sentiments for the card front are dies from my stash and the “Happily ever after” is a Karen Burniston die that I cut twice so that I could paper piece the red heart into the blue words. The gold swags on the card front are from another Karen Burniston dies set of Party Border Blends.

Hope this fun card has provided some inspiration for your crafting. 😊

SUPPLIES Used from Dies R Us:

Dies

Miscellaneous

Other Supplies:

  • Simply Creative Mr & Mrs steel cutting die
  • Momenta Firefly’s Celebrate Happy Birthday die set 35516 R7
  • Papers by BoBunny and Recollections’ Shimmer Cardstock
  • Colored and mirror cardstock scraps
  • Nuvo Dream Drops – Cloud 9
  • Nuvo Jewel Drops – Peach Sobert
  • “Congratulations” stamp by Jennifer Ellory from Cardmaking & Papercraft issue 178
  • Stampin’ Up – Crumb Cake ink pad
  • Neenah Social – A7 envelope – Bare white techweave
  • Nuvo Mica Mists – Pecan Peach, Nebula Blue, Silver Smoke and Antique Gold

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE