CAS’ed Autumn Gatefold Pop-Up Card

This card was made for Craft Roulette #335 whose parameters were include a gatefold project, vacation colors, CAS (copy and sample) from last week’s gallery as element and paper strip(s) as random. I used Karen Burniston dies and stamp set to CAS Megan Francis’s leafy card from Craft Roulette’s #334 galley.

Watch the video below to learn how I made this card.

Cardbase: Watch the video above for how to cut and score the cardbase. Cut an 8.5×11-inch sheet of white 65lb. cardstock down to 8.5×10-inches and scored at 2.5-inches and 7.5-inches along the long side and then flipped the cardstock sideways to score at 7-inches. Cut away the small rectangles at the sides of the long rectangle.

With the gatefold flaps closed, begin drawing the window aperture over the two flaps. Using a 2.5×3.5-inch rectangle of scrap paper, find the best placement for the ATC cut-out. With a T-square ruler, drawn in the lines to cut out with a craft knife as shown in the video. (My border measurements are 1.75-inches at the top, 1.25-inches at the sides and 2-inches at the bottom.)

Background: Using torn strips of decorative papers, create the 4.875x 6.875-inch background for the inside of the card. Cover the bottom flap on both sides with your grass-colored paper. (I ended up using scrapes for the flap, and some extra leaves to decorate the side of the flap with the “Pull” and arrow stamped on it. I used My Favorite Things Interactive Labels stamp set.)

Tree: Cut six trees from brown using the Tree Pop-Up die set. Glue three trees together twice as shown in the video above and adhere them to the card. Add leaves cut from the same die set. (I cut three sets of leaves and colored some of the leaves to get three different shades of red using two shades of cardstock – kraft and red.)

Cat Swing: Cut two black cats from the Skeleton and Bat die set. Glue together. Use die stencil to color eyes. (Yes, the eyes on this cat can look like four eyes or very large cat eyes. Which did you see first?) Add bow tie also in the same die set. Cut two seat pieces from the Tree Pop-Up set and glue together. Glue cat to seat and add orange twine as shown in video above.

Leaf Pile with Pop-up Dog: Cut a squat arch large enough to cover the Parcel Pop-Up mechanism and cover it with die-cut leaves. Watch the assembly video at the bottom of the linked page for the Parcel Pop-Up . Cut the three pieces for the mechanism from white cardstock and assemble as shown in video above. Cut the upper half of the largest mechanism piece from grass colored paper. Trim and adhere it to the mechanism as shown in the video above. Cut two of the dog from Doghouse Tiny House Add-Ons set. Use die stencil to color eyes, nose and belly. Color ears black. Use bow tie from Skeleton and Bat die set in orange as collar. Glue dog onto pop-up strip.

Sentiments: Stamp “Warm Autumn Wishes” from Karen Burniston’s Fall Phrases stamp set onto a 1.5-inch circle of yellow. (My circle die slipped when cutting it out and so my moon goes was placed at the top edge of the card.)

Belly Band: Using a sheet of 4×6-inch decorative paper and a scrap piece of clear vellum, I made the belly band to keep the card closed. Again, stamping the “Pull” and arrow using My Favorite Things Interactive Labels stamp set.

Envelope: The card fits into an A7 (5x 7-inch) size envelope.

Above is my pop-up card in the left two photos and Megan Francis’s card that I CAS’ed on the right. Can you see what elements from her card that I sampled?

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please subscribe, like and leave comments 😊

Follow my YouTube channel, Instagram and Pinterest as well.

___________________________________

Materials Used:

Dies

Stamps

Papers

  • Scrapbook.com – 4.5×5.5-inches Double-Side Cardstock – Spooky and Willow Lane
  • My Favorite Things- 8.5×11 100 lb. Cardstock – White
  • The Paper Studio – 8.5×11 Clear Vellum
  • Brown, Greens, Kraft, Orange, Red and Yellow Cardstock

Ink

Adhesives

Tools

Miscellaneous

  • Bakers’ Twine – White & Orange
  • Tiny Leaf Die-Cuts from a variety of dies in my stash

Wild Puppy

It’s Sneak Peek Week for Karen Burniston’s November 2025 Release of new dies and stamps.

Today’s cards use the new dies of Playful Pop-Up, Dog and Cat Playful Add-Ons, Greeting Labels, Dog Borders and Woof! as well as Go Wild!, Rectangles – Crosshatch and Waterfall Card. A new stamp set, Dog Sayings, was also used. The dies and stamps will be available for pre-order starting November 24, 2025.

Watch the process video to see how I made this kind of interactive card.

(NOTE: Below are the specifics for the A2 right pull teal colored card.)

Cardbase: I used a purchased kraft side-fold A2 cardbase. Using the largest of the Rectangles – Crosshatch dies, cut two from patterned paper. Adhere the rectangles to the front of the card and to the inside right panel. (Cut a piece of pattern paper 4.5×5.75-inches and save to cover the back panel once the staples have been added to the card assembly.)

Dog Pop-Up: Using the Playful Pop-Up set, cut one of the largest die and the “Y” piece die from a dark brown cardstock. Cut the decorative notched square die from light brown cardstock. Follow the video above to assemble but do so in reverse for a right pull strip. Cut one rectangle .75×1-inch from the patterned paper. Cut one piece of clear thick plastic packaging .75×2.5-inches and another strip of lighter weight acetate .5×3-inches. Cut a cover strip also .5×3-inches from the same pattern paper as the inside panel. (The .5×3-inch pieces are the guide strip.) Once the guide strip over the pull piece has been installed and stapled in place, glue the 4.5×5.75-inch piece of pattern paper over the card back to hid the staples.

From the Dog and Cat Playful Add-Ons die set, cut from a light brown cardstock the paw arms and the dog ears. From dark brown cardstock, cut two of the paw backing die. From black, cut one nose-mouth piece and one set of the small eyeballs. From white, cut one set of large eyeballs. From pink cut one tongue. Watch the video above for how to assemble.

Bow: From the Dog and Cat Playful Add-Ons die set, cut from red cardstock – the largest eyeball, the largest cat ears and the paw arms. Trim off the paw end of the arms to make a fish tail ribbon ends and assemble as shown above.

Sentiments: The card sentiments “Go Wild!and “Woof!” are die cut. “Woof! Is used twice inside the card and once on the card back. Inside there is a stamped sentiment of “Your dog thinks you’re cool (and I do too!)” was stamped in black using the Dog Sayings and cut out using the largest oval from the Greeting Labels die set. Paw print is from Dog Borders.

Envelope: The card fits into an A2 (4.25x 5.5-inches) size envelope.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please subscribe, like and leave comments 😊

Follow my YouTube channel, Instagram and Pinterest as well.

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Carabelle Studio – 12×12 Double-Sided Cardstock – Sorbet designed by Azoline
  • Clear Thick Plastic Packaging
  • Grafix – 8.5×11 Dura-Lar Acetate .005 – Clear Film
  • Black, Browns, Cream, Pink, Red and White Cardstock
  • Target – A2 Cardbase and Envelope – Kraft

Ink

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Stamping Blocks used as paperweights
  • Scissors
  • Stapler
  • Pencil
  • Ruler
  • Craft Mat
  • We R Memories – QuickStick

Miscellaneous

  • Black Organza Ribbon 1/4-inch wide

Rainbow Bridge Card

It’s the Karen Burniston design team challenge for July 2025 using the theme of Rainbow. I choose to make a sympathy card for a pet using the new Rainbow Add-Ons and the previously released Flip Frame Pop-Up, Cat and Dog, and Rectangles and Labels – Crosshatch die sets along with the Rainbow Greetings stamp set.

Watch the process video to see how I made this card.

Cardbase: I started with a purchased side-fold 4×6-inch A6 cardbase. Cover the four panels with decorative papers cut using the scalloped edge die in the Rectangles and Labels – Crosshatch set. Use the large frame die in the Flip Frame Pop-Up set to cut the card front frame. The dog comes from the Cat and Dog die set. I inked the white dog slightly with gray ink and used a fine tipped black marker to stencil in his face and paw areas.

Rainbow Flip Pop-Up: Watch the assembly videos for the Flip Frame Pop-Up and Rainbow Add-Ons located at the bottom of each linked die set.

Sentiments:  All the sentiments used on the card come from the Rainbow Greetings stamp set and are stamped in brown ink. They are cut out using the two smallest label dies in the Rectangles and Labels – Crosshatch set.

Envelope:  The card fits into an A6 (4×6-inches) size envelope.

___________________________________

Thank you for experiencing this blog post.

I hope this inspires you and makes you smile.

Please like and leave comments 😊

___________________________________

Disclaimer: Karen Burniston products are provided free of charge by the manufacturer for review and use. All other items were personally purchased. Compensated affiliate links used where or when possible, meaning I will receive a small percentage commission from these manufacturers at no cost to you. This will allow me to add more content to my YouTube channel and help out a lot. Thank you.

Materials Used:

Dies

Stamps

Papers

  • Darice – 8.5×11-inch Single-Sided Paper – Green Prints
  • Concord & 9th – 8.5×11-inch Solid 80 lb Cardstock – Poppy, Marmalade, Buttercup, Clover, Peacock, Eggplant, Spout, Oceanside
  • Green and White Cardstock
  • Park Lane Paperie – A6 Cardbase & Envelope – Cream

Ink

  • Memento – Fade Resistant Dye ink – Espresso Truffle
  • Pigma – Mircon 01 Fine Tip Pen – Black
  • Ranger – Tim Holtz Distress Ink – Lost Shadow

Adhesives

Tools

  • Die Cutting Machine
  • Paper Trimmer
  • Bone Folder
  • Score Board
  • Stamping Platform
  • LDRS – Stampendable Stamping Tool
  • Stamping Blocks
  • Scissors
  • Paper Masking Tape

Miscellaneous

  • Green Gem
  • Green Satin Bow