Fall Is In The Air

Hello, it’s Sue of Ully Cat’s World and today we are making an autumn birthday pop-up card for a gardener using Karen Burniston dies.

Cut the two printed papers to 4 15/16 inches x 7 inches. Position them inside the card base so that there is a gap between the papers where the fold can be seen. Using removable tape, tape them together and place the chair die with the nibs over the fold.

Run taped papers with die through die-cutting machine.

Glue printed papers inside card base, adding matching scraps of papers to cover the brown spaces let where chair is cut away.

Cut chair, arms and seat from woodgrain paper. (I made my own woodgrain paper using a woodgrain stamp that I heat embossed with watermark ink and clear embossing powder.)

Fold woodgrain chair folds as shown on packaging. Glue wood grain chair to patterned paper chair matching up the seat, back, arms and leg pieces. Train the chair to pop-up by opening and closing card a few times.

Decorate card with the garden charm set cutting off the charm loops. (I dirtied-up the tools and gloves with brown ink.)

The chrysanthemum-like flowers are made with the smallest flower from the Flower Pot Pop-up or Flowers and Bee set cut like fringe around the center circle. Cut two, fringe, push up fringed petals and glue one on top of the other. Glue three flowers onto foliage from charm set. Trim foliage as needed.

Round flowerpots and watering can over a marker or glue bottle. Add oak leaves from Tiny Tree Pop-Up to potted flowers and around card.

Make flowerpots and watering can pop-up taking printed paper cut into strips, fold and glue into squares. Glue pot to square and onto card.

The front of the card is made with a label die and a sentiment from Karen Burniston Word Set 7 – Autumn.

(I used a fine tipped glue bottle to added glue to the die-cut words that worked extremely well. Then I used a fine-tipped brown pen to mark stitches using the die as a stencil.)

Inside, the “Happy Birthday” is another Karen Burniston die that has been colored with Distress Ink. A label die-cut is used for a personal message.

Hope this fun card has put a smile on your face and provided some inspiration for your crafting. 😊

See more chair cards below:

·  Cat In The Window

·  Fall Is In the Air

·  Spring Is In The Air

·  Summer Is In The Air

·  Winter Is In The Air

Dies from Dies R Us:

Additional Supplies Used:

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Have A Seat Mini Series

For the next four days I have a mini chair series focusing on a pop-up chair die by Karen Burniston.

Today’s chair uses the Adirondack Chair Pop-Up with a slip cover to make it into a big overstuffed chair, perfect for cats to nap in!  You can access this post and the ones in this week’s seasonal chair posts below as they become live posts.

See more chair cards below:

The Secret Garden

Greetings it’s Sue here from the Dies R Us design team with a quad-fold, garden pop-up card.

This card was inspired by some of the Tutti Designs garden dies. The card specifically uses Garden Trellis, Garden Fountain and Garden Bench Set.

I created a quad fold card base by taking two 10 x 7 inch heavy card bases and cut one into a 5 ½ x 7 inch piece and a 4 1/5 x 7 inch piece. The larger piece is scored and folded at ½ inch along long side to form a tab to glue behind the other card base that in scored and folded in the middle. This creates a tri-fold card. Cut rectangular apertures from each side large enough to fit the fountain and trellis dies. Apertures should match up when folded closed.

Now is a good time to use Distress Oxide inks and a blending brush to color the inside of the trifold card a sky blue.

Spritz lightly the 4 ½ x 7 inch piece of card base with water to make it more pliable and use a cobblestone embossing folder to create the textured “floor” of this card. Score and fold ½ inch along short side of piece. Paint or decorated the textured area before gluing tab to center back of tri-fold card.

Cut two fountains from white card stock and ink both sides of each piece using Distress Oxide inks and a blending brush. (Adding the beads is optional.) Using a needle and thread, string seed beads and then adhere with glue to fountain. Glue beaded fountain to front of card aperture, glue second fountain to inside of front aperture matching up with front fountain and hiding the threads of the beading. (My aperture was bigger than the fountain and trellis, so I used thin stirps of clear plastic that I cut form packaging to act as extensions for the bases and tops of the fountain and trellis so that I could glue them to the card base.)

Cut two trellises from white card stock and two from green paper. Cut out the ivy from the green pieces and glue to the white trellis pieces. (An alterative is to color the ivy with green markers on the white trellis.) Adhere one trellis to the second aperture on the card base and then glue the second trellis to the back of aperture matching up lattice work.

Cut a tree and leaves from the Karen Burniston Tree Pop-Up die set. Cut a number of strips of grass from green paper and glue in layers to the inside of card. Position the tree behind the bench on the center panel. (I had to cut a second trunk to make the tree taller.)  Glue down the tree then layers of grass. Decorate with birds cut from Karen Burniston’s Tiny Trees Pop-Up die set.

Cut two of the benches out of heavy brown card stock. Save the four strips that are waste from the die cutting of bench. Cut the top of bench back off one piece as shown. Snip the arm rest from the back of the same piece and trim off extra angled piece. Fold the cut back down to form seat of bench.

Fold down the cut arms. Take the wider of the saved four strips and fold in a rectangle that is 1/ 2 x 3/8 inches and glue ends together. Glue the bench seat to the whole bench piece which becomes the bench’s back. Glue the rectangles between the front curved bench legs and the back curved bench legs. Take one of the thin strips and cut in half. Fold each half into an “L” shape. Glue the “L”s under the fold arm rests and adhere “L” strip to the bench back.

Train the bench to fold up, before gluing on to card base. To glue the bench into the card. Add glue first to rectangle bottom strips and position the onto the card “floor” near the fold. Glue bench back on to center panel of card. Move the bench while glue is still wet for best positioning.

To add some activity to the card, I stamped and colored a Funky Fossil dog stamp I had with Distress Oxide – Rusty Hinge with a water brush. The ball was colored with markers and attached to the dog with a strip of clear plastic cut from some packaging. The dog was then attached to the cobblestone flap by cutting a strip of cardstock and folding into an “L” shape and gluing to back of dog and onto cobblestones.

I covered the fronts of the aperture panels and the back center panel with green patterned paper before adding sentiments.

Sentiments are foiled Spellbinders sentiments I had in my stash and a Riley & Co. sentiment that is stamped on white card stock scrap in green ink, fussy cut and adhered to the back of cobblestone panel.

Hope this fun card has provided some inspiration for your crafting. 😊

SUPPLIES Used from Dies R Us:

Other Supplies:

  • White and brown cardstock
  • Green paper
  • Patterned papers from Park Lane Paperie – Strawberry Patch
  • Clear plastic strips cut from packaging
  • Darice cobblestone embossing folder
  • Crayola Signature Brush & Detail Dual-ended Markers
  • Ranger – Distress Oxide – Mowed Lawn, Stormy Sky, Tumbled Glass, Rusty Hinge
  • Scissors
  • Needle and thread
  • Clear glass seed beads
  • Funky Fossil Designs – Clear stamps – More Furry Friends
  • Foiled sentiment strips from Spellbinders Glimmer System foils and plates
  • Riley & Company -inspirations – Find joy in the ordinary – INS-111
  • Stampin’Up Classic ink pad – Pear Pizzazz

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

A Fairy Tale Story

Hello, it’s Sue of the Dies R Us Design Team and today we are making a slimline pop-up New Home card from the castle collection by Karen Burniston.

You will need:

  • One lightweight green cardstock 9 inches x 4 inches
  • One lightweight black cardstock 9 inches x 4 inches (Or fold one 9 inches x 8 inches green piece in half instead of using two separate pieces)
  • Two starry night patterned paper9 inches x 4 inches 
  • Cut from Castle Pop-Up set
    • One large castle in medium gray cardstock
    • Two Tabbed tower pieces from medium gray cardstock
    • Six decorative large wall pieces using embossing pads from light gray cardstock
    • Two decorative small wall pieces using embossing pads from light gray cardstock
    • Two decorative tower pieces using embossing pads from light gray cardstock
    • Two decorative drawbridge tower pieces using embossing pads from light gray cardstock
    • Two decorative window tower pieces from light gray cardstock
    • Two decorative tower roof pieces from blue paper
    • Four flags from red paper
    • One drawbridge door piece from brown paper
    • One 4-5 piece of thin baker’s twine
  • Cut from Slim Flaps and Frames Set
    • Three top-fold pieces from green cardstock
    • Two side-fold pieces from green cardstock (You don’t need this piece if you are using a single piece of cardstock, folded base)
  • Cut from Mini Pops Pop-Up Set
    • Two large-angled platforms from green cardstock
    • Three small-angled platforms from green cardstock
  • Cut from Winter Charms set
    • Three small fir trees from light green cardstock (filling in hole with cardstock)
    • Two large fir trees from dark green cardstock (trimming off charm ring)
  • Cut from Princes and Mermaid set
    • One head and arms piece from skin-colored cardstock (using stencil on die and fine tipped markers color in facial features)
    • One hair piece from colored cardstock
    • One dress underskirt from dark blue cardstock
    • One dress from light blue cardstock
    • One belt from dark blue cardstock
    • One crown from gold cardstock
  • Cut from Knight and Dragon set
    • One dragon from green pearlescent paper (using stencil on die and fine tipped markers color in wings and facial features)
    • One dragon tummy from white pearlescent paper (using stencil on die and fine tipped markers color in tummy stripes)
    • One flame from yellow cardstock (using stencil on die and fine tipped markers color in flame with red)
    • One heart from red foil card
    • One knight from silver foil card
    • One set of visor, gloves, shoe tips and shoulders from silver foil card
    • One large shield from silver foil card
    • One sword from silver foil card (color handle black with a permanent marker)
    • One helmet plume from red paper
    • One small shield from red paper (Draw a cross on shield using a black marker and ruler)
  • Cut from Word Set 2 – Birthday
    • “a wish” from gold card
  • Cut from Word Set 4 – Just a Note
    • “ing” from gold card
  • Cut from Happily Ever After
    • “Happily, Ever After” from gold card
  • Cut from Nesting Circles Set
    • One circle the size of the castle from green card stock
    • One circle at least a half inch larger all round the size of the castle from blue paper

There are two ways to create the card base – one using two single side flaps in the center of the card acting as the hinge with the top black 9 x 4 piece, and the second way using a single piece folded to form the 9x 4 card base. (I will be showing the first way in photos.) Glue top-flaps to short sides of the green card base. With these flaps closed, glue the two side flaps to the center of card base. Glue the final top-fold flap to front side of the two center flaps.

Castle – Lightly ink the embossed tower and wall pieces with a grey or black Distress Ink. Folded the six score lines on the castle piece.

Adhere all decorative pieces to front and back of castle piece except for back/inside short wall and back/inside drawbridge tower pieces. (You will adhere these pieces once the castle is installed to card base so they can cover over the green and twine pieces.)

Glue tab to undecorated side of castle to form a six-side circle.

Fold both the green circle and the blue circle in half and cut along fold. Glue one half of blue circle to center of the center flaps along the center fold. Adhere the other side of blue circle to other side of fold allowing a small gap along the fold so that the card can open easily. Center the green circle pieces over the blue circle and tape the green circle at sides using removable tape. Using the pop-up die with the nubs, center the nubs over the fold or gap on the green circle and tape. Move the taped green circle with die taped to it to die cutting machine. Remove all the tape from the die and green circle after cutting. Fold up the cut tabs in the circle. Glue the green circle on to the blue circle with the tabs up.

Match the drawbridge tab to the inside of the castle and glue in place with the door/bridge open. Thread twine through top holes in tower. Adhere the solid tab to the inside of castle opposite of drawbridge opening. Glue brown door to top of drawbridge matching up holes.  Thread twine through drawbridge holes and glue to underside of bridge and then adhere bridge open to blue circle. Glue remaining decorative pieces to inside of castle to hide the green tabs and twine.

From scrap green cardstock cut rectangles to hide the blue showing from where tabs fold up. (An alternative would be to cut circle slightly smaller than the green circle of a thin paper that would mimic grass or stone of a castle floor to cover the holes.)

(If your tallest tower hangs out when the card is closed, you can trim the tower some and reglue the flag. I decided that I could live with the hint of the flag showing.)

Knight, Princess and Dragon – Assemble figures following package directions. To attach the figures and trees to the card, first glue any decorative background papers to the back of the three flaps. Layout the position of the figures and trees with angles platforms making sure none of the figures will show when the card is closed. Adhere the figures to platforms and then to the card base following the die package instructions.

Card Front – Adhere a starry night paper panel to black front card base and the other piece to the back side of card base hiding the flaps’ tabs. With card closed, glue black side of front panel to center flaps.

Secure the inside of black panel to card base with washi tape. Glue “ing” to “wish” to form the word “wishing.” Adhere sentiments to front of card.

A personal message can be added above and below the castle.

The finished card will fit into a #10 business envelope.

Hope this pop-up card has put a smile on your face and provided some inspiration for your crafting. 😊

Dies from Dies R Us:

Additional Supplies:

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Nativity Snow Globe

A new babe is a joy. People came from far and near to see the sweet babe.

This card is made with the new Gemini Dimensional snow globe dies. Three layers for the nativity globe – a stenciled background, a stable middle layer and the Wisemen in front.

The background is inked using Distress Inks using the stencils that are included in the die set. The front and middle layers are colored with watercolor pencils.

The finishing touches are a gold foil star and covering the globe base with a solid blue card stock and gold label and letters.

The card fits folded into an A7 envelope which is stamped on the back with a scene stamp of the Wisemen entering Bethlehem.

Thank you for reading. If you enjoyed this blog post, please like it and follow the blog. 😊

Supplies Used:

Welcome to the Horse Farm

Greetings it’s Sue here from the Dies R Us design team with another barn pop-up card.

The barn pop-up is Karen Burniston’ Barn Pop Stand as are the Farm Edges fence and hills. The horses are cut and stenciled using Karen Burniston’s Horse, Unicorn and Zebra set and the hat and pitchfork come from her Tiny Accessories 3 set. “Howdy!” sentiment is also by Karen Burniston.

Cut:

2 – largest barn die out of red card stock -Cut doors out of one

1 – small “X” window from white

2 – doors “X” die out of white

1 – door railing out of white

2 – roof trim die out of white

2 – weathervanes at same time by placing silver mirror card back-to-back

3 – hay bales -color with Distress Ink

1 – pitchfork – color with markers

2 – fence out of white

3 – horse bodies

3 – horse manes and tails

1 – cowboy hat from yellow – color with distress inks and markers

2 – Howdy! – one from white and one from yellow

Cut horses and color using stencils on dies and Distress Oxide inks using large Pink & Main blender brush. (This was my first time using this larger inking brush and I was delighted with the ease of inking up the large horse pieces.  The ink blending went smoothly unlike when I use sponge inking tools.)

Glue white “X” frames to window cut outs to form a hay loft door. Using clear tape hinge door onto loft. Glue on roof trim to front and back barn pieces. Glue weather vane to inside back piece.

To assemble the sliding doors, weave the top bar end of the red door piece through the white door railing piece fold the red bar over the railing where indicated and glue bar onto top of door making sure no glue is on the railing. Glue white “X” frame over door. Repeat with second door.

The card base is a 10 x7 inch white heavy weight card stock folded in half to form a 5 x 7 inches card. Panels of printed paper were cut to cover the front and back panels (5 x 7 inches, front and 5 ½ x 7 inches, back).

The inside panels are 4 ¾ x 6 ¾ inches. I positioned and taped the inside panels with clear removable tape so that I could die cut the pop-up flaps to anchor the barn to. Using Scor-tape, I adhered the paper panels to the card base removing the clear tape once all panels were adhered.

Glue barn pieces to pop-up tabs. Cut a 1-inch strip of paper fold in half and fold to create tabs on both bottom edges. Glue two hay bales and pitchfork to one side and glue tabs down inside barn, over the card fold. This will be seen when the barn doors are opened. Glue remaining hay bale behind barn hay loft door.

Glue matching printed papers to cover over tabs inside barn. Using only a small dot of glue at inside top of barn glue barn pieces together. Fold fences in half and glue ends inside barn. Glue decorated horses to fence.

Decorate the inside and outside of card with grass and hills cut using Farm Edges die set. (I trimmed off the tractor from my hills and had to cut and move the die to get a longer hill for my 7-inch card.)

The front sentiment is cut twice and slightly off set. I used Distress Oxide ink to color the yellow layer.

Stamped a vintage stamp of a horse on the back flap of envelope.

Hope this fun card has provided some inspiration for your crafting. 😊

SUPPLIES Used from Dies R Us:

Other Supplies:

  • Red, yellow, green and white cardstock
  • Printed papers from The Paper Studio’s Beach House pad and Graphic 45’s Fruit & Floral pad
  • Clear tape
  • Crayola Signature Brush & Detail Dual-ended Markers
  • Pigma Micron 05 archival ink pen
  • Vintage horse stamp
  • Stampin’ Up – Early Espresso ink pad
  • Ranger – Distress Ink – Fossilized Amber
  • Ranger – Distress Oxide – Ground Expresso
  • Sponge dauber
  • Stamping platform
  • Scissors
  • Tweezers

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Good Morning Farmstyle

Greetings it’s Sue here from the Dies R Us design team with a barn pop-up easel card.

Using PoppyStamps’ new Country Barn Pop Up Easel Set and lots of PoppyStamps’ Whittle animals and sun, this is an easy card to make.

Cut:

1 – largest barn die out of brown card stock

1 – middle barn die out of cream

1 – smallest barn die out of red (Save all the doors and windows cut out for the backing of the “X” frames)

2 – small “X” window from white

1 – doors “X” die out of white

1 – roof trim die out of white

1 – straight line out of white

Cut animals/sun and color with markers, black gel pen and Distress Ink.

Glue white “X” frames to doors and window cut outs to form doors. Glue on roof trim.

If you plan on having doors that open, ink blend the cream barn piece edges and door/window openings.  

Using clear tape, make hinges for all the doors and windows to open.

Position and glue cow to inside of barn. Glue barn to middle cream barn piece making sure not to glue any doors that are hinged to open. Glue flying chicken inside open barn door and other animals to front of barn.

Glue tab of brown base piece to back of cream piece. Test the barn in pop-up easel position. Using foam squares adhere green grass with eggs glued to them to the brown base to act as easel stops. Don’t have grass in front of the door that opens. Glue sun on to back of cream piece as if sun is rising behind the barn roof. (Make sure that sun top is no higher than the roof tip so card will fit in envelope.)

Stamp a sentiment on card base and back flap of envelope.

Hope this fun card has provided some inspiration for your crafting. 😊

SUPPLIES Used from Dies R Us:

Other Supplies:

  • Red, brown, cream and white cardstock
  • Foam squares
  • Clear tape
  • Scrap green paper for grass
  • Staples – Invitation Brights 24 lb.- Gummed Envelope – 4 3/8 x 5 3/4 inches
  • Crayola Signature Brush & Detail Dual-ended Markers
  • Simply Made Crafts by Helen Griffin – Fun Sentiments Stamp Set
  • Vintage goat stamp
  • Stampin’ Up – Early Espresso ink pad
  • Ranger – Distress Ink – Vintage Photo
  • Sponge dauber
  • Stamping platform
  • Scissors

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

A July 4th Birthday

Today we are making a 3-dimensional ice cream sundae card to fit in a mini slimline envelope using dies from Dies R Us.

1. You will need:

  • One card base 11 inches x 3 3/8 inches from heavy white cardstock
  • One outside star paper 11 inches x 3 3/8 inches
  • One red and white strip inside back paper 4 3/4 inches x 3 3/8 inches
  • One wood-grained inside base paper 6 1/4 inches x 3 3/8 inches
  • One ice cream dish cut from vellum with details colored with white ink
  • Five ice cream scoops (I used 2 pinks, two white confetti and one chocolate)
  • Two chocolate toppings (I coated mine with a clear glaze to make it shiny)
  • One whipped cream topping (I used a shiny coated white scrap)
  • One red cherry (I cut from red card stock, added white gel pen accent, brown cardstock stem and coated with a clear glaze to make it shiny)
  • Two spoons (I cut mine from silver mirror cardstock)
  • Two sets of “You’re Sweet” sentiment – one red and one black or navy blue
  • Two sets of “Happy Birthday” sentiment – one white and one red
  • Stars and circles for hanging banner and decorations
  • One paper doily cut in half, 6 inches baker’s twine and clay red, white and blue confetti pieces

2. Fold the card base at 6 ¼ inches and place pop-up sundae die on fold per package instructions.

3. Follow the photos on working the folds. Start with bottom tier, then second tier and finally the two angled fold on first tier.

4. Glue narrow support piece to back of dish stem as marked in photo.

5. Glue white scrap to fill in rectangular hole in pop-up dish base, if covering with a vellum dish.

6. Place striped inside back and base papers behind/under card base and trace opening with pencil and cut out as shown in photo.

7. Adhere star paper to outside of card base.

8. Adhere inside striped papers to inside of card. Attach the cut-out sections as well.

9. Glue two scoops to pop-up dish and then add glue to back side of vellum dish where white inked decorations are so glue won’t show through vellum. Position vellum dish over pop-up dish base.

10. Attach ice cream scoops, toppings, cherry and one spoon to tiers, making sure that the movement of pop-up is not impaired by these decorations. Add clay confetti sprinkles.

11. Trim and fit a half paper doily under dish. Secure to base with dots of glue at three points.

12.Position and trim the other half of doily to front of card.

13. Glue the two sentiments together off-setting the darker shade in back to create a shadow effect.

14. Position and attach sentiments on front and inside card base.

15. Glue-up stars and circles banner on baker’s twine and glue in the corners over ice cream. Decorate with additional spoon, clay confetti sprinkles and paper stars.

Hope this sweet card has put a smile on your face and provided some inspiration for your crafting.

For another Ice Cream Sundae card I’ve made click here

Thank you for reading this blog post. Please like and leave a comment. 😊

SUPPLIES Used from Dies R Us:

Additional supplies used:

  • Ranger’s Glossy Accents
  • The Paper Studio – Crackled Stars 665976, Patriotic Woodgrain 847111 and XXl Stripe-Red/White 690587
  • The Paper Studio – Printable Vellum Paper – 8 1/2″ x 11″
  • Buttons Galore & More – Star Spangled Sprinkletez – NK114
  • BoBunny -I Heart Stars Stamp set – 121054444
  • Stampin’ Up Classic Stampin’ Pad – Dapper Denim ink
  • Taylored Expressions – Mini Slim Envelopes

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE