Author: ullycatdesigns

Long Distance Tea

| ullycatdesigns

Love to have a cup of tea with your friend, but COVID-19 measures making you have to do it long distance? Here is a card to let your friend know you are thinking of them.

This card uses Paper Discovery products from the Teacup Fairies collection and the Papercraft Society box 17 which also has a tea theme.

The front is made using the cut and embossing folder with white card stock that I spritzed with water for a good impression. I used a blue watercolor marker to color the embossed areas.

The card base is a 7 x 5 inches folded which had the front edges and center colored with the blue marker as well.

I cut the small circle area a second time from pink card stock to get the pink used inside the card onto the front. Embossed piece was raised up with foam tape. The pink circle was glued to base and teapot raised on foam tape. Using the medium doily die and a circle die the same diameter as the pink circle, cut a scalloped frame from lightweight paper. Glue frame to embossed layer.

The teacup inside is made in two pieces – the cup and the saucer. I stamped the pieces before I assembled.  The saucer is cut into two parts to make for a smoother fold of the card. (The multiple layers of paper on this card means that the fold cannot be covered up.) To assemble, glue cup side tab to form cup and slide in handle. Glue handle tabs inside. Slide cup bottom tabs into saucer slots and glue to underside. Glue cup inside piece tab to underside of saucer. Glue patterned papers and doily to inside of card keeping center fold uncovered. Fold cup and saucer flat ad glue one side of saucer along card fold. Then glue other side.

Add rectangle “calling cards” and die cut spoon to decorate inside. Glue another piece of pattered paper to back of card to have even weight to front and back of card.

The back flap of envelope is stamped with teas set from the Papercraft Society box in China blue ink.

Thank you for reading this blog post. Please like and leave a comment. 😊

Materials Used:

Dies

Stamps

Ink

Papers

Miscellaneous

Swing Gate Fold

| ullycatdesigns

Hi it’s Sue here from the Dies R Us Design Team with another interactive swing gatefold card.

I based this card off of a swing card I made in last week’s blog post. You can get the specific instructions on how to make the bench swing by clicking here.

After cutting a 3 inch square opening on a 5 inches x 6 inches piece of heavy white cardstock, ink blend a soft blue sky all over.

Using two pieces of heavy white cardstock 3 inches x 3 1/2 inches, cover with tiny flowered washi tape (you could use patterned paper instead). Next die cut the gate and fence pieces to fit a 3 inch on each side. Before gluing the fence pieces down, use some of the leafy vine from a birdhoue die set to grow up around the fence.

Once the fence and gate pieces are glued to the 3 x 31/2 pieces score and glue the ¼ inch tabs to the back of the 5 x 6 inch base. Cover the back of the base card with washi tape/patterned paper.

Next glue the swing posts and roof over the cut-out 3 inch square blue inked side. To decorate the posts, glue on more of the leafy vines. Make the bench swing as described in last weeks blog. Attach with tape the threaded chains to the back side of the roof, making sure the bench is hanging even. With the swing in place, glue the second post and roof piece over the 3 inch cut square, matching up the post and roof edges. Glue on dark blue roof pieces to front and back of card.

Back of card

Decorate the scene with trees, birds, squirrels and grass. The swing pillows are cut using the pillow dies from a sofa die set.

You can write a message inside the gates or on the back of the card.

Hope this fun card has put a smile on your face and provided some inspiration for your crafting.

SUPPLIES Used from Dies R Us:

Dies

Inks

Miscellaneous

Other Supplies:

  • Flowered washi tape
  • White embroidery floss
  • Striped and colored paper scraps
  • Black fine tip pen

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

A Fishing Father’s Day

| ullycatdesigns

Hi, it’s Sue here from the Dies R Us Design Team with an interactive Father’s Day card.

This card is made with Karen Burniston dies focusing on the Tiny Trees Pop-Up in a 3 3/4 inch x 8 3/4 inch card base. (I used a thin white card base cut 8 3/4 inch by 7 1 /2 inch folded in half and covered with four panels of 3 3/4 inch x 8 3/4 inch decorative papers.)

Cut the number of trees you plan to use and assemble using the packaging directions. Decide on placement of trees based on where they will be in the folder position. (For slimline cards the trees must be place on the center fold rather than using the offset piece which allows for trees to be added off the center card fold.) Glue down tree frames and wait until glue has set to attach trees.

Die-cut four bears (Winter Animals) stenciling through the die with a black fine tip pen the eyes, nose and mouth. Run the stenciled bears back through the machine with the embossing mat and plate for your die-cutting machine to emboss the face and bottom feet. To make a baby bear, cut the bear just below its paws and then slide the bottom piece up under the arms and trim off excess edges. Glue together. The baseball caps are made by die-cutting the engineer’s cap from the Tiny Accessories 3 die set and rounding off the puffy crown and bill of the cap. (I tried to make the logo of the recipient’s favorite baseball team on the caps.) The fishing poles are described below. Drops of Glossy Accents were added to the bears’ eyes and nose to made them standout on the dark brown cardstock.

The stream is made with a long scrap of shiny spray painted paper in blue, gold and silver that was die-cut several times using the hill die from the Long Nature Edges die set. These wavey pieces were then glued to a strip of blue cardstock and fish cut from the Camping Charms die set, were added to the stream flow. The same fish were embossed, and their eyes stenciled in black ink and then glued to a piece of string or cording which was glued to the stick charm from the same die set. The rings were all cut off of the charms.

To make the bears stand under the trees inside, a small strip of green cardstock was cut and scored to form a cube. The cube is glued to both the card base and the tree frame and then the bear is glued to the font of the cube.

Decorations to the card include one tree front with leaves and three birds cut using the dies from the Tiny Trees set, two apples from the Tree Fruit set, and a white blanket from the Picnic Elements set. The blanket could be used to write a personal message on.

The “Happy Father’s Day” was cut three times from thin cardstock using Karen Burniston’s Alphabet dies. The layers were glued together and then glued to the front of the card using a T-ruler to keep the letters in a straight alignment.

Hope this fun card has provided some inspiration for your crafting. 😊

A

Other Father’s Day cards on my blog

A Tool Box Father’s Day

A Fishing Father’s Day

A Father’s Day Waterfall Pop-Up

A Work Bench Father’s Day Card

In-Vested Father’s Day Card

SUPPLIES Used from Dies R Us:

Other Supplies Used:

  • Textured green and blue cardstock
  • Trees and sky printed paper from Die-Cutting Essentials issue 32
  • Colored and shimmer cardstock scraps
  • Ranger Glossy Accents
  • Natural colored cording
  • Black fine tipped pen
  • Stampin’ Up – Early Espresso ink pad
  • Stampin’ Up Best Catch stamp set
  • Neenah Social –No. 10 envelope – Natural kraft

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

A Swinging Anniversary

| ullycatdesigns

Today we are making a 3-dimensional swing card using Karen Burniston dies from Dies R Us.

1. Cut two of each color using the swing die. Save the off-cut pieces for bench supports (I find the best piece is right below the bench , about 3/8 inches tall x 2 inches)

2. Trim off two roofs from darkest colour and the four posts from the lightest color. Cut the chains off the middle color. Cut bench support into two strips. (I save all the parts that I’m not using on this card to use on other cards.)

3. Cut words from each of the three colors.

4. Cut four stems from green and ten small flowers and center circles from flower dies.

5. Cut a 5 inch square and four small strips ¼ inches X 1 ¼ inches from sturdy green cardstock for the card base and post tabs.

6. Trim heart and scallop off one of the roof pieces. Glue roofs to yellow bases.

7. Glue heart and scallop trim together, being careful not to glue roofs.

8. Glue white posts ton fronts of yellow base posts.

9. Take one of yellow benches, snip the back at sides and fold down back to become bench seat. Trim of top of the bench as shown.

10. Cut the bench support strip into two side strips Fold ¼ on either end to form two tabs.

11. Trim tabs to fit the bench cut-outs. Glue tabs to lower side of back of seat piece as shown. Then glue other tabs to back bench piece.

12. Take 5 inches green square and fold in half, fold down one side to make a mountain fold, repeat on other side. Base should have two mountain folds in the shape of a “M.”

13. Glue small green support strips to inside of posts. Let dry and then glue posts to inside valley of base as shown in red circles.

14. Trim off top two loops on bench chains.

15. Cut two lengths of thread or embroidery floss. Thread one piece through the two chains on one side of bench. Repeat with other thread on opposite side of bench.

16. Tape threads to underside of roof making sure bench hangs evenly. (Red circles) Trim off tails of thread. Test swinging your bench. Smile.

17.Glue your words together offsetting at least one or both of the back colors. (Off-setting all three gives a blurred effect as shown, but off-setting just one makes the letters look 3D.)

18. Glue your flowers together and then onto the stems/bushes. Glue to base.

Hope this fun card has put a smile on your face and provided some inspiration for your crafting.

Want to see other swing cards I’ve made? Click here.

Thank you for reading this blog post. Please like and leave a comment. 😊

SUPPLIES Used from Dies R Us:

Additional Supplies Used:

  • Stampin’ Up Classic Stampin’ Pads – Early Espresso and Emerald Envy
  • Summer meadow stamp set from Cardmaking & Papercraft Issue 198, August 2019
  • Square envelope from my stash

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Happily Ever After

| ullycatdesigns

Hi, it’s Sue here from the Dies R Us Design Team with an interactive wedding card.

This card is primarily made with Karen Burniston dies focusing on the Cake Pop-Up in a 7 inch x 5 inch card base. (I used an off-white shimmer card stock for the inside of the card and took mica spray-painted shimmer card panels for the front and back of the card.)

Cut out two of each of the cake tier pieces, two of the three scalloped edging pieces and two of the bride and groom piece. (I used shimmer cardstock for all but the groom pieces.) Fold tier pieces on scored lines as shown in the video. Glue each tier together following the video.

It is easier to decorate the cake before attaching it to the card. (I added some embellishment drops to the scalloped edges that needed to dry overnight.) Glue one set of bride and groom together on to tab at cake top. Glue the second set on to back side of cake top. Adhere the scalloped edging on to each tier of cake, starting and stopping each scalloped piece at the center fold of each tier.

Cut a 3 1/4 inch circle from silver mirror and then cut a 2 1/4 inch circle from the center of the larger circle. Cut in half and glue on either side of the card base fold. Play with the layout of your decorative pieces before gluing the cake to the silver circle. Align the cake center fold with the card base fold. Place glue on the lowest tier’s folded tabs and glue in place. Fold card closed and firmly press cake to card base. Wait until glue has set to open.

I used the fancy layered label and tiny hearts dies from the Paper Frames Pop-Up set to decorate the inside of the card. (To make the tiny hearts be visible I coated them in a peachy translucent embellishment drops that had to dry overnight.)

The sentiments for the card front are dies from my stash and the “Happily ever after” is a Karen Burniston die that I cut twice so that I could paper piece the red heart into the blue words. The gold swags on the card front are from another Karen Burniston dies set of Party Border Blends.

Hope this fun card has provided some inspiration for your crafting. 😊

SUPPLIES Used from Dies R Us:

Dies

Miscellaneous

Other Supplies:

  • Simply Creative Mr & Mrs steel cutting die
  • Momenta Firefly’s Celebrate Happy Birthday die set 35516 R7
  • Papers by BoBunny and Recollections’ Shimmer Cardstock
  • Colored and mirror cardstock scraps
  • Nuvo Dream Drops – Cloud 9
  • Nuvo Jewel Drops – Peach Sobert
  • “Congratulations” stamp by Jennifer Ellory from Cardmaking & Papercraft issue 178
  • Stampin’ Up – Crumb Cake ink pad
  • Neenah Social – A7 envelope – Bare white techweave
  • Nuvo Mica Mists – Pecan Peach, Nebula Blue, Silver Smoke and Antique Gold

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

A Basket of Flowers For Mom

| ullycatdesigns

Mothers deserve special cards. A basket full of roses using Anna Griffin’s new Basket Pop-Up kit and a few tea service pieces from an older Anna Griffin Favorite Tea Embellishments made the perfect card for this special mom.

The envelope was stamped with stamps from Anna Griffin’s Treasury of Stamps and Dies using Stampin’ Up Always Artichoke ink.

Other cards using stamps and papers from Anna Griffin include:

Thank you for looking at my blog. Please like, comment and follow. 🌞

A Sweet Spring Card

| ullycatdesigns

Hi, I’m Sue SK of Ully Cat’s World and a new member of the Dies R Us Design Team.

 This sweet spring card is a z-fold card that when flat fits in an A2 (4 3/8 in x 5 ¾ in) envelope.

It uses two dies – TuttiDesigns Easter Gate and PoppystampsHello Poe Script.

1.  Cut three gates from white cardstock, saving the waste pieces from between the fence pickets to use as fence rail extensions. (See bottom left gate).

2.  Trim arch and left flowers from gate/fence and save off-cuts from second die-cut.  

3.  Trim off areas of gate to make into fence. (Compare right fence to left gate.)

4.  Repeat steps 2 & 3 with third die-cut.

5.  Glue a fence section to each side of gate. Use the waste pieces as fence rail extensions and flowers to glue the pieces together.

 6.  Fold right side of fence as shown. 

7.  Color the flowers, vine and grass using fine tip markers.

8.  Taking one of the waste birds, trim off excess paper from feet and tail. Cut a wing from scrap and glue onto bird. Color bird.

9.  Glue bird’s eye back into gate piece and glue colored bird over bird on gate. Use fine tip pen to add dot to eye. Glue third scrap bird onto back of bird on gate.

10.  Glue the two waste arch/vine pieces to the back of gate arch. (Red outline) Add fence rails as needed to support where fence pieces were added to gate piece.

11.  Cut a blue piece of cardstock 10 inches x 4 inches. Score at 3 ¼ inches and 5 5/8 inches.

12.  Color the background to add grass using a green marker and clouds using white watercolor crayon.

13.  Die-cut two of the “Hello” sentiment in light and dark colors. Glue light on top of dark, off setting to create a shadow.

14.  Glue left side of fence to left side of card, matching bottom edges and left corner.

15.  Glue right small folded flower/fence section and fold card base onto glued section.

16.  Glue sentiment onto from of card.

Don’t forget to decorate your envelope and get more use out of your dies by using the off-cuts as stencils. 


17.  Using the waste piece from under the arch and gate, tape closed the bird’s feet and tail. Stencil using ink and sponge dauber.


18.  With a fine tip pen add details to the bird.

Hope this card brings a smile to your face and provides some inspiration to your crafting.

Click here to see more cards I’ve made with fences.

SUPPLIES Used from Dies R Us:

Tutti Designs - Dies - Easter Gate

Tutti Designs – Dies – Easter Gate

Poppystamps - Dies - Hello Poe Script

 Hello Sentiments

Cosmic Shimmer Specialist Acrylic Glue - 125mL

CosmicShimmer – Specialist Acrylic Glue – 125ml

Sizzix - Big Shot PLUS Machine Only - White and Gray + 10 BONUS DIES

Sizzix – Big Shot PLUS die cutting Machine

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Vested Tags

| ullycatdesigns

Cards for men can be fun to make when they use a small die set by Leane Creatief which includes a suit jacket, a vest, shirt collar, two ties and a BBQ apron as well as a tag box. The box makes up to a little over 4 ½ inches tall by 1 ¾ inches wide and 3/8 inches deep. Perfect for tucking a note, tickets to a sporting event, or folded money.

(I purchased this die from Dies R Us when they had one of their special European dies sales, but it sold out quickly. You can get some lovely dies from around the world in these sales, but you must act quickly when you see one you like.)

For the card background I used two Poppystamps border dies to create a layered set of circles using oatmeal cookie and a dark brown scrap of cardstock for the layers under the plaid paper. Oatmeal cookie was used to cut the tags out of and a cream piece of Recollections cardstock was used to make a mini slimline card base (5 ½ inches x 3 ½ inches).

The “Happy Birthday” sentiment was cut once from a light color and once from a dark brown scrap and glued together a bit off set to give depth. A third layer was cut and glued to the back not be seen, but to raise the words up.

The vest was cut from a plaid paper. The buttons and pockets were stenciled on through the die. The tag is attached using foam squares.

A mustache was stamped using an older Sizzix stamp set in a dark brown on the back of the envelope.

Thank you for reading this post. Please like, comment, and follow this blog. 🌞

Supplies:

Dies

Stamps

Papers

Inks

Miscellaneous