Shine Bright

Sometimes simple is best. This embroidery floss filled-tree card has a simple message and design – Shine!

This is a first try at the new Spellbinder’s Large -Die-of-the-Month for November 2020 which has three designs to cut the holes and then using needle and thread to fill-in the designs. I used the full six strands of embroidery floss but think next time I might try three or four strands for the light circles. I followed the assembly video for the die set taping off my loose ends of threads.

Once the tree was stitched, I cut down the blue scrap piece I had die-cut the tree onto 3 7/8 x 3 5/8 inches. Using foam adhesive strips, I adhered the tree onto a green piece of mirror car that was 4 3/8 x 4 1/8 inches. These layers were then placed on a 6 x 5 inches sheet of patterned paper by Craft Consortium that had been adhered to a 6 ½ x 5 inches white card base.

Using a foiled sentiment, I had in my sentiments stash, I set the theme of shing bright for the card. (I like to do my foiling of sentiments in large groups to save time later.)

The inside sentiment is one my favorites from an old Kaisercraft stamp set. I tried a new tinsel embossing powder with it.

For the envelope flap, I used a new embossing folder that has big round dots, much like the candle glow circles stitched on the card.

Hope this card makes you smile.


Dies/Foiling Plates/Embossing Folders


  • Kaisercraft – Clear Stamps – Sentiments -Traditional – CS313

Ink/Embossing Powder



© Sue Small-Kreider 2020

The Best is Yet to Come

“You’re not getting older, you’re getting better” was the inspiration for this anniversary card for a “better” couple. I used one of my favorite Spellbinder’s die set – Sunday Drive along with one of it’s add-on sets  – Sunday Sunset Drive.

To create the rainbow oval I hot foiled the Spellbinder’s Essential Glimmer Ovals and then the sentiment above from a Spellbinders Glimmer of the Month sentiment set. (Spellbinders has great clubs of the month that get you the newest dies/glimmer plates before they are released to the general public and/or get sold out, plus discounts on other products like the Journey Platinum and Sapphire Mini die cutting machines that I use. The Mini I got for 75% off.)

The heart and star are some die cuts that have been in my stash for years most like cut from punches and junk mail.

To assemble the car and passengers I looked at the pictures on the packaging, but you could watch an assembly video too. The License plate was cut from white glitter paper. The taillights are Nuvo Glow Drops Neon – Shocking Pink and silver matte cardstock. I used Watercolor pencils on the passengers’ skin and hair. I added the yellow ribbon scarf to create the illusion of motion following the direction of the woman’s hair. (I was also thinking of an old Audrey Hepburn movie of her in a small sports car with a scarf blowing in the wind.)

Because I don’t own matching glimmer plate or stamp that would compliment the typeface of the front sentiment, I used die cut letters from gold mirror card and another of the license plates from the Sunday Sunset Drive set.

As is my style I stamped the back of the envelope with a hint of what is inside using an older BoBunny hearts stamp in red.

This card feels like one a husband might give to his wife as they near retirement.

Other Sunday Drive cards:

Sunday Drive Celebration

A Snowy Sunday Drive with Santa

Santa Bauble

Santa Delivers to the Tropics

Being Spooky

Driving into a Spooky Sunset

The Best is Yet to Come

Hoppy Spring!








© Sue Small-Kreider 2020

Snowy Forest Day

It’s a snowy day as you walk through the woods of white birch trees and here the red cardinals singing their sweet song, and then he appears. The majestic stag, who quietly walks to the ridge and surveys his kingdom. Finally, you come to a small fir tree that has been decorated for Christmas. You know this is your destination and the faint tune of “We wish you a Merry Christmas” hums through your head.

This is the story I hope the recipients of this card have when they open the card.

Stag XMAS-front

I fell in love with the Creative Expressions Paper Panda Forest Stag die the first time I saw it and designed my card around this large die creating a 5 ½ x 8 ½ inches card using two pieces of heavy white cardstock. I went through my dies to find a large enough opening to go behind the stag that still left a sufficient border to keep the card sturdy. I used one from the Crafters Essentials I by Kat Scrappiness.

Having scored and folded both pieces of 8 ½ x 11 inch white cardstock in half, knew I had to cut the rectangular aperture in three of the four panels. Laying out how I wanted the front of the card to look with my dies, I cut two of the panels at the same time by putting the sheet folded in-half through the die cutting machine.  Once the front and middle were cut, I laid-out how the second folded sheet of cardstock would overlap on the middle panel and traced the aperture opening onto the overlap panel. I cut this aperture with the cardstock fully open so a wide format die cutting machine was needed.

Stag XMAS-Extended wide

I didn’t have any birch trees long enough to fill the apertures so I scoured my favorite on-line crafting stores and found on my favorite discount die store Dies R Us the Impression Obsession birch trees with the tiny cardinal dies. I cut two sets of trees out from the same white cardstock as the card base. I cut two sets of cardinals (front and back) from red scrap cardstock.

To make the stag, I cut the shape three times from brown cardstock. The last of the three stags was cut from brown cardstock covered on one side with double-sided adhesive and then when the backing paper on the adhesive was pulled off I laid the piece on scrap paper and shook ultra-fine glitter over the adhesive to ‘frost” the stag much the same way you would cover an inked image to be heat embossed. The excess glitter should stay on the scrap paper so it can be put back into its storage container. Once glittered, I glued the three stag shapes together off setting, the glittered one on top to create a slight shadow.

Stag XMAS-front-CU

Being new to heat foiling, I practiced some on scrapes before using the Christmas tree foiling plate on my good paper. The Glimmer Foiling System by Spellbinders is easy to use if you watch a lot of videos on how to use the system and follow the instructions faithful. I do not recommend doing heat foiling when you are tired or in a hurry, that’s when mistakes happen.  Because the card is a large size, I had to foil the tree through the cut aperture to fit it through my die cutting machine. The season’s greetings sentiment is foiled in silver and die cut out using a dotted sentiment banner die that comes in the same Spellbinders Holiday Sentiments set. I placed scrap red cardstock behind the dots before gluing the banner in place.

Stag XMAS-inside back

Once all the elements had been cut and foiled, the assembly began with laying out how the layers would look when the card was closed. Four birch trees were glued behind the stag then the four birch trees were glued to backside of the middle panel. Then the two middle panels were glued together sandwiching the trees between them. Then the stag was glued to the front with the antlers glued to the trees.  A cardinal was laid-out on each of the tree panels and each glued down with its matching back piece glued on the back side of the trees. The “Season’s Greeting” banner was glued on the front to anchor the stag.

Stag XMAS-inside middle


Dies & Glimmer Foil Plates




Sue Small-Kreider ©2020

See the video at

Autumn Forest Birthday

Autumn Forest -inside

I am a paper hoarder and have been looking at this lovely set of forest animals Craft Consortium paper for months, taking it out thinking about what I could make from it. Putting it aside to see if the muse strikes.

A fall birthday for an animal lover became my muse. I used my favorite Lawn Fawn Scalloped Box Card Pop-up die set to cut the base and decorative squares for the card.  The papers are double-sided so I was able to mix and match the squared to be just flowers or flowers with the fox. I fussy cut the owl and oak leaves from another sheet in the collection. The birthday girl’s special day falls at that time of the year when some flowers are still blooming, but the occasional autumn leaf my drift down.

The main elements are cut from the inside covers of the 6×6 paper pad.

Autumn Forest-assembly -outside

Because I have made this box a lot, I have taken to use the largest stitched die in the set and extend cut a large square to make a stiffer back to the box and as a place to write a personal message.  To extend cut using a die cutting machine, simply place one edge of the die just off the edge of the cutting plat so it won’t cut when going through the machine.  Move the die to cut the other side of the square again placing the die edge just off the cutting plates. It may take you a few tries to master this technique, but once mastered you can expand the uses of your die collection.

To assemble the box I decorate the front and back sides of the flaps before I connect the tabs using red double-sided tape. (See assembly video) If you follow the steps in the video, you should have a perfect box.

Hot Foiling

I am just learning to do hot foiling using a Spellbinders Glimmer Hot Foiling System. Having watched a number of videos on how to hot foil, I tried out a number of sentiments in rose gold foil. I used two of my first attempts on this card.

Autumn Forest -inside-CU

I used glue to adhere my elements on to the cross bars and a foam square to give some dimension to the owl.

Autumn Forest -front-Flat

When decorating always remember you can add elements to be seen only when folded closed.

Autumn Forest -back-Flat

If you want to have the full experience of opening up this card, click here to see video of the box card being opened.