Christmas

Snow Days

| ullycatdesigns

What North American children hasn’t hoped for a school closing day due to a snowstorm.  This is a card celebrating a snowy day in lighthearted pastels. Karen Burniston dies are used for the card.

To make this A2 size card, cut a rectangle 4 ¼ x 11 inches of pink heavy cardstock and fold in in the middle to make a 4 ½ inches tall by 5 ½ inches wide card base.  Cut four decorative paper panels at 4 x 5 ¼ inches. Adhere these panels to front, back and insides of the card base.

It is easiest to die cut all the pieces you will need to make both the inside and outside snowmen at the same time so that they are similar in colors and papers used. Also cut three circles or other label shapes on which to mount your sentiments. (For the personalized message circle, I added a smaller white circle.) Think about using contrasting colors for your words and their backgrounds. (I used blue to make the mostly white with snowflake paper I used for the words standout.)

After watching the assembly video on the inside snowman assemble as directed. Once the snowman is adhered to the card base, you can begin to decorate the card. (I used a sled die-cut from Memory Box to add to the snow time activities.) Remember to balance out the position of decorations from one side of the card to the other. There are two different snowflakes in the two snowmen die sets by Karen Burniston. They make wonderful filler decorations for the card.

Because I could not make up my mind on which stamp to use on the back of the envelope, I stamped two envelopes with hints as to the card’s theme. The word cloud is from Stampendous while the snowman is from Art Impressions.

Thank you for reading. If you enjoyed this blog post, please like it and follow the blog. 😊

Dies:

Stamps & Ink

  • Stampin’ Up Classic Stampin’ Pad – Dapper Denim
  • Stampendous – Winter Stags stamp set from Creative Stamping issue 90, Dec 2020
  • Art Impressions – Unmounted Rubber Stamp – Scrapbook.com exclusive Snowman – 5084

Papers

  • American Crafts – 348953
  • Pink card base – Bazzill -Pink Icing – PS1 – 102
  • Glitter paper – white from my stash
  • Colored cardstock from my stash
  • A2 Envelope

Additional Supplies Used:

Fineline 20 Gauge Applicator & Bottle

Waiting on You Know Who!

| ullycatdesigns

The anticipation of the holiday season, the longing to see family and friends, the desire for relaxation and time off from the work world, and all the other anticipated joys and adventures of the holidays are what this card is about.

Colorado Craft company’s clear stamps and coordinating dies of Anita Jeram’s delightful drawings and hand lettering make it a joy to make a holiday card using a permanent black ink and watercolor pencils. Thin foam squares and festive background paper complete the front of the card.

My Favorite Things has a cute, layered stamp set and coordinating die which I used inside the card for the famous red suited elf.

I made this card in an evening starting with an A2 card base (4 ¼ x 5 ½ inches) in white. I trimmed a 6×6 background paper down to 4 x 5 ¼ inches and saved the scraps to decorate the back of the card. Using the leftover white cardstock from the card base, I stamped all the images and sentiments and then colored the images. Next, I die cut the images and fussy cut the sentiments. The front of the card decorations are adhered with thin foam squares while the inside stamped pieces are glued in place.

The back of the card was stamped in white with a snarky sentiment of “Yep I made this . (Don’t throw it out.)” from Technique Tuesday. (If I had had more time and forethought, I would have heat embossed all the sentiments on this card.)

To set the experience for the card recipient, I always decorate the envelope back. This time the flap was stamped with a sentiment from another Anita Jeram’s stamp sets Make A Wish and sparkles from a vintage Disney stamp set.

Thank you for reading. If you enjoyed this blog post, please like it and follow the blog. 😊

Stamps

  • Colorado Craft Company – clear stamps & dies – AJ527 – On The Lookout by Anita Jeram
  • Colorado Craft Company – clear stamps & dies – AJ481 – Make A Wish Mini by Anita Jeram
  • My Favorite Things – clear stamps & dies – CS-600 Sweet Christmas
  • Disney -Mickey Mouse & Friends – clear stamps – DUS0171 Mickey A6 Stamp
  • Technique Tuesday – Clear Stamps – Made with Love

Inks & Waterolors

  • Memento – Fade-Resistant Dye Ink Pad – Tuxedo Black
  • Stampin’ Up – Classic Stampin’ Pad -Pear Pizzazz and Real Red
  • Simon Says Stamp – Premium Pigment Ink – White
  • Nuvo – Highly Pigmented Watercolour Pencils – Pastel Highlights, Brilliantly Vibrant and Elementary Midtones

Papers

  • Heavy white cardstock – 1 sheet 8 ½ x 11 inches
  • Catherine Pooler – Winter Pick-N-Mix  6×6 Patterned Paper
  • A2 white envelope

Additional Supplies:

Winter Is In The Air

| ullycatdesigns

Hello, it’s Sue of the Dies R Us Design Team and today we are making a Christmas pop-up card with a Charlie Brown Christmas tree using Karen Burniston dies.

  

The chair die just fits in a 3 ½ inch x 6-inch mini slimline card. I started by cutting a 3 ½ inch by 11-inch piece of lightweight white card stock and folded it in half. Next, I cut piece of patterned background paper slightly larger than 3 ½ inch by 5 ½ inch and marked with a pencil where the chair arms connect with the card back on the patterned paper and cut slits so that the printed paper could be slid into place behind the chair. Using the same technique, I cut a piece of white glitter card stock 3 ½ inch by 6-inch for the ground, cutting slots for the chair feet. Glue both decorative papers to card base.

Cut chair, arms and seat from woodgrain paper. (I made my own woodgrain paper using a woodgrain stamp that I heat embossed with watermark ink and snow embossing powder.)

Fold woodgrain chair folds as shown on packaging. Glue wood grain chair to patterned paper chair matching up the seat, back, arms and leg pieces. Train the chair to pop-up by opening and closing card a few times.

Decorate card with the Holiday Charm set cutting off the charm loops. To make the tiny potted fir tree, use the pine branch from the charm set and the sand pail from the chair set.

I used Cosmic Shimer Fluffy Stuff to create the little piles of snow around the base of the chair. Read the directions on the bottle before using! (You need to be careful when you heat the fluffy stuff up so as not to burn your card with your heat tool.)

Last, I sprayed the inside of the card with a white spray paint for a soft snow fall effect.

For the card front I cut a 3 ½ inch by 5 ½ inch piece of white glitter card stock and glued it onto the card base. On the card back I cut a textured piece of white card stock 3 ½ inch by 6-inch and glued to the card base. Next taped the top seam of the front and back with a red plaid washi tape and continued down the back of the card for added decoration. On the front the Merry Christmas sentiment is an old die I’ve had in my stash for many years. The snowflakes are from the charm set. (I used a fine-tipped glue bottle for adding glue to the sentiment and snowflakes that made it so easy to glue without a big mess.)

The back of the mini slimline envelope is stamped with fir trees in a dark green ink.

Hope this fun card has put a smile on your face and provided some inspiration for your crafting. 😊

See more chair cards below:

*  Cat In The Window

*  Fall Is In the Air

*  Spring Is In The Air

*  Summer Is In The Air

*·  Winter Is In The Air

* Happy Hour at the Beach

Dies from Dies R Us:

Additional Supplies Used from Dies R Us:

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Have A Seat Mini Series

| ullycatdesigns

For the next four days I have a mini chair series focusing on a pop-up chair die by Karen Burniston.

Today’s chair uses the Adirondack Chair Pop-Up with a slip cover to make it into a big overstuffed chair, perfect for cats to nap in!  You can access this post and the ones in this week’s seasonal chair posts below as they become live posts.

See more chair cards below:

Nativity Snow Globe

| ullycatdesigns

A new babe is a joy. People came from far and near to see the sweet babe.

This card is made with the new Gemini Dimensional snow globe dies. Three layers for the nativity globe – a stenciled background, a stable middle layer and the Wisemen in front.

The background is inked using Distress Inks using the stencils that are included in the die set. The front and middle layers are colored with watercolor pencils.

The finishing touches are a gold foil star and covering the globe base with a solid blue card stock and gold label and letters.

The card fits folded into an A7 envelope which is stamped on the back with a scene stamp of the Wisemen entering Bethlehem.

Thank you for reading. If you enjoyed this blog post, please like it and follow the blog. 😊

Supplies Used:

Festive Foliage and Hearts – Trifold card

| ullycatdesigns

I love the sentiment “The holidays are a time to open our hearts” that is at the center of this card.  The card was stamped with the Alte New stamp set Festive Foliage which allows you to stamp a fir tree with two to four colors.

I stamped this card from a piece of heavy white cardstock 5 ½ inches x 11 inches using a stamping platform so that I could position the stamps easily. I used a different green ink for the tree and the heart foliage stamps. The tree is Tranquil Tide, and the heart is Pear Pizzazz. The sentiments were stamped with VersaMark-Watermark ink and heat embossed with a gold embossing powder. The red heart is stamped using Real Red ink.

To create the tri-fold base I scored and fold the longest edge at 4 ¼ inches and 2 ½ inches. Once the tree was stamped on the front, I opened the card out flat and using a craft knife cut the heart out of the card front. Next, I refold the card and placed the cutout heat back in place and stamped the heart foliage. I also opened the card front, slipped a scrap piece of paper in and stamped the inside flap with the heart in green as well.  I then put glue on the inside stamped heart section and with the cut-out heart in the tree front, closed the card and adhered the cut-out heart to inside flap. Once the glue had dried, I also stamped the back side of the flap and heat with green foliage stamp. With the inside flap unfold, but the front fold shut I positioned the solid heart stamp to be stamped directly behind the foliage hearts.

To finish the card, I folded the card and taped the front tightly shut to spray some gold mica mist over the front of the card for added interest and glued a small red ribbon to the top of the tree.

See the gift tags I stamped using the same stamp set by clicking here.

If you enjoyed this tri-fold card, check out some of my other trifolds:

One In A Melon

Shabby Chic Trifold Card

Santa Vintage Trifold

Sleepytime Dreams

Supplies:

Stamps

Papers

Inks/Embossing Powder

Miscellaneous

Festive Foliage and Hearts – Tags

| ullycatdesigns

“The holidays are a time to open our hearts” is the sentiment that these festive gift tags have.  These tags were stamped with the Alte New stamp set Festive Foliage which allows you to stamp a fir tree with two to four colors. There is a heat in the center of the tree foliage.

I stamped these tags from a scrap piece of heavy white cardstock 5 ½ inches x 3 inches using a stamping platform so that I could position the stamps once and turn the card to stamp a second image. The stamps are labeled tree 1, tree 2, heart1, and heart 2. I used a different green ink for each stamp. The tree is Pear Pizzazz and Tranquil Tide, and the heart is Lemon Lime and Emerald Envy. Two tiny heart stamps from my stash are stamped over the foliage. The smallest and most solid heart stamp was stamped with VersaMark-Watermark ink and heat embossed with a gold embossing powder as was the sentiment. The outline stamp is inked with Real Red.

Using a hole punch at the top of the tree I was able to add some red organza ribbon to finish the tag.

Also see the trifold card made from this same stamp set using the full tree and heart stamps.

Supplies:

Stamps

Papers

Inks/Embossing Powder

Miscellaneous

  • Red organza ribbon from my stash

Victorian Trim House Luminaria

| ullycatdesigns

Warm and cozy is this small brick house with its white ornate Victorian trim as light streams through its windows. This is the third house luminaria in my blog posts using a battery powered candle.

Made with Impression Obsession’s house die set, this 3-inch tall by 2 3/4 inch square has slight modifications made to original two-dimensional design. I cut two of the brick house die as well as two partial die cuts with the same die to make the side walls. I cut a total of eight square windows and one arched window as well as two doors. The L shaped eaves die I cut twice from white cardstock and the twice more from thicker scrap cardstock. The ornate trim pieces I cut two from regular cardstock, but the ornate porch roof piece I cut once from regular cardstock and twice from thicker cardstock. I also cut two pieces of vellum 2 ¾ inches x 1 inch and five additional 1 inch squares of vellum.

Partial die cutting of side walls by placing die over the edge of cardstock.

I made two templates from purple scrap cardstock of the front and side of the house and using window die cuts I fingered out the window placement. Once I had the placement, I traced around the window frames with a pencil.  I cut the windows with the dies. Using the templates, I traced the window placement on to my red die-cut pieces and cut them out with a craft knife and metal ruler cutting inside the pencil lines. For the door I only cut out a rectangle where the windowpanes would be. Next, I glued the vellum pieces to the back of the red sides of the house.   

Once the vellum is adhered to the back of the window cut outs, you can turn the house pieces with their fronts facing up and decorate them by gluing on the window frames and doors. I used a gold gel pen to make the doorknobs.

For the L shaped eave pieces, I glued the regular white cardstock to the thicker scrap cardstock. I did similar for the porch roof piece, but I glued two of the thicker scrap cardstock pieces together before adhering the top regular cardstock piece.

To assemble the house sides, I laid all the pieces side by side and tape them together on the back side.

The roof is a 5 inch by 3 inch rectangle of brown cardstock stenciled with a stencil in my stash with Distress Ink and folded in the middle.  I taped the roof to inside of my house for stability.

The house and roof will fold to mail in an A2 envelope if the white eaves pieces are trimmed to fit by an 1/8 inch.

Thank you for reading about this little house. Please like and leave a comment. 😊

Links to other house luminaria and houses.

Also see the series of “A Week of Christmas Houses”

Day 1 – From Our House to Your House

Day 2 – Santa is Coming

Day 3 – A Baby is Coming

Day 4 –Keeping the Home Fires Burning

Day 5 – Red Four-Square

Day 6 – Santa Delivers to the Tropics

SUPPLIES

Dies

Ink

Paper

Miscellaneous

Holiday House Luminaria

| ullycatdesigns

Colorful holiday lights fill up the long winter nights. This little holiday house luminaria would be perfect as a holiday table decoration or a child’s nightlight. (Note: Use battery powered candles only.)

Made with Karen Burniston’s recent release of her holiday house die set, this 3-inch tall by 2 ½ inch cube has slight modifications made to original two-dimensional design. I cut four of each of the die pieces, (except for the smaller house shape and door pieces, of which I cut two each.) I stenciled the roof pieces and brick pieces first and then assembled two houses exactly as shown on the package with one modification, I used a craft knife to cut out the windows on the red house piece.

To cut the windows I used two of the window frame pieces to decide on placement and then I traced with a pencil around them. Using a metal ruler and craft knife I cut an 1/16 inch inside the pencil marks, so that the window frames would still have an edge to glue onto the red house. For the sides of the house without a door, I made sure the tops of the windows lined up with the tops on the front and back of the house. (HINT: If you are going to make a lot of these houses, make templates from heavy cardstock to trace where the window cut-outs would be.) Glue strips of vellum to the back side of the house pieces to act as window glass.

I cut the snowy roof edging and string of lights from white shimmer paper. The lights were colored using markers before assembling the house. The snow on the ground around the house were scraps from the die cutting of the roof edging pieces.

To assemble, trim the roof sides to be the same as the house sides. Next, lay all the pieces side by side and tape them together on the back side.

The roof top is a 3-inch by 3-inch square that was stenciled moving the roof die across the square. Using a score board score ¼ inch from all four sides of the square. Snip on of one the scored sides of the tiny squares to form tabs. Fold on all four score lines to form a square tray shape. You can push this tray up inside the house cube. No glue needed.

The house and roof will fold to mail in an A2 envelope.

Thank you for reading about this little house. Please like and leave a comment. 😊

Links to other luminaria and houses:

Victorian Trim House Luminaria

House Luminary

Victorian Christmas Parlor

Also see the series of “A Week of Christmas Houses”

Day 1 – From Our House to Your House

Day 2 – Santa is Coming

Day 3 – A Baby is Coming

Day 4 –Keeping the Home Fires Burning

Day 5 – Red Four-Square

Day 6 – Santa Delivers to the Tropics

Day 7 – House Luminary

SUPPLIES

Dies/Punches

Ink

Paper

Miscellaneous