12 Days of Christmas Trees – Day 12

Each day for 12 days, I have been showing card variations made with Karen Burniston’s Christmas Tree Pop-up die.  I recommend watching her assembly video before attempting to cut and assemble the pop-up tree.

For all of these cards I started with an A7 size card base (10 x 6 ½ inches), but because my die cutting machine can only accommodate 6-inch-wide pieces of paper, I had to trim the cards down to 10 x 6 inches.

Day 12 – Home for the Holidays-Peace and Joy

HFH-Peace-Inside

Using a paper collection kit makes inspiration and color matching easy and gives you the finished, color-coordinated cards that you might find in a high-end boutique shop.

I used the Echo Park Home for the Holidays Collection Kit by Alisha Gordon for this card. You can cut a 12 x 12 inch sheet into two 10 x 6 inch card bases (Ornaments #HFH73006). From a second sheet of 12 x 12 paper (Holiday Swirl #HFH73003) you will cut four sets of the tall center tree pieces and four of the smaller side trees. (I cut the paper into three strips – two strips wide enough for the center trees – folding these strips over to be able to double cut the large center trees.) by double cutting you have perfectly matched front and back for the center two sections. Glue them together.  This adds strength and ensures the tree is green from all angles of viewing. The star atop the tree is the only paper not contained in the kit. It is a holographic paper, cut twice for each piece, so the star can be seen as gold sparkles from all angles.

HFH-Peace-Front

I used one of the smaller topper with the ornament and decorated it with scraps from the inside tree cuttings and a white gel pen to write “PEACE” on the banner. The tree stand mechanism hole is piece patched. (See if you can find it?)

HFH-Peace-Inside-CU

Inside, stickers are used for decoration along with the tree itself.

See all the of the 12 Days of Christmas Trees by clicking on one below. Don’t miss tomorrow’s Bonus Day post!

Day 1 – Give Joy -Plaid

Day 2 – Home for the Holidays-Village

Day 3 – Holly Joy

Day 4 – Snowy Day

Day 5 – Give Joy – Holly

Day 6 – Gingerbread Joy

Day 7 – Home for the Holidays-Joy to the World

Day 8 – Nutcracker Greetings

Day 9 – Plaid Joy

Day 10 – Home for the Holidays-Let It Snow

Day 11 – White Christmas

Day 12 – Home for the Holidays-Peace and Joy

Bonus Day – Tropical Christmas

Click Here for video of all 12 trees

 

SUPPLIES USED:

Dies

Stamps & Ink (on envelope)

Paper

Miscellaneous

12 Days of Christmas Trees – Day 9

Each day for 12 days, I will be showing card variations made with Karen Burniston’s Christmas Tree Pop-up die.  I recommend watching her assembly video before attempting to cut and assemble the pop-up tree.

For all of these cards I started with an A7 size card base (10 x 6 ½ inches), but because my die cutting machine can only accommodate 6-inch-wide pieces of paper, I had to trim the cards down to 10 x 6 inches.

Day 9 – Plaid Joy

Plaid Joy-Inside

My inspiration for this card was my working on a platform challenge card as well as needing a masculine card.  I had just picked up Ms. Sparkle Camping paper pad and saw the two plaids used in the card. The green, white and blue plaid reminded me of how the snow often is in the weeks leading up to Christmas – kind of spotty with some grass picking through it.

Plaid Joy-Front

The cover for the card is made up from extra pieces from the trees, the cardinal from the tree set, plastic confetti stars and a die-cut “Joy” from the Impression Obsession die “Joy to the World.”

Plaid Joy-CU Inside

The platform is something I had seen Karen Burniston do for a Halloween card and thought it would create a hill for the tree to stand on which the matched plaid paper helps camouflage in the photos. I cut two of the platforms from KB’s House & Fence Pop-up set and adhered the sides with the center pop-up together to make one large platform. Next, I placed the plaid paper where I wanted it to be on the base of the card and then played with placing the platform to make sure there was enough room for the tree to fold down inside the card when closed. Turning the platform upside-down onto the back of the plaid paper, I tracked the outline of the platform. Then I cut out the platform plaid paper and adhered it to the platform. Next, I flattened the platform to cut the tree-stand flaps into the center of the platform. I adhered the tree-stand to the platform before I attached the platform to the card base. (Before adhering the platform, I installed the plaid paper to the card base matching the plaids.)

The Merry Christmas and snow swirls come from an older Karen Burniston die set called Merry Christmas Pop-up. The holographic star and cardinal on the tree are in the Christmas tree set.

Follow the rest of the 12 Days of Christmas Trees with a new post tomorrow.

Day 1 – Give Joy -Plaid

Day 2 – Home for the Holidays-Village

Day 3 – Holly Joy

Day 4 – Snowy Day

Day 5 – Give Joy – Holly

Day 6 – Gingerbread Joy

Day 7 – Home for the Holidays-Joy to the World

Day 8 – Nutcracker Greetings

Day 9 – Plaid Joy

 

SUPPLIES USED:

Dies

Stamps & Ink (on envelope)

Paper

Miscellaneous