Stable Happy Mail

7 Stable-front-opened

Everyone likes Happy Mail and this one is made for a family of horse lovers. After making a z-fold card using a gate and fencing, I envisioned this horse paddock card.

5 Stable-folded envelope

The card is designed to fit folded into a #10 slimline envelope.

I laid-out the fence first on a 2 ½ inch x 12-inch strip of textured cardstock folding it long-ways in half and then scored at 3 inches and 9 inches. Draw pencil lines for the fence posts at: 1/4 inch, 1 7/16 inches, 1 9/16 inches, 2 7/8 inches, 3 inches, 3 1/8 inches, 4 7/16 inches, 4 9/16 inches, 5 7/16 inches, 6 1/16 inches, 7 7/16 inches,, 7 9/16 inches, 8 7/8 inches, 9 inches,, 9 1/8 inches, 10 7/16 inches, 10 9/16 inches, and 11 ¾ inches. Next, I evenly spaced three boards long-ways and colored in the spaces to be cut out. Using an Xacto craft knife and metal ruler I cut out the colored spaces on the folded over strip measuring 1 ¼ x 12 inches. (I recommend coloring in the cutout spaces as it gets very confusing, and like me, you have to start over again.)  (If you have the Karen Burniston Farm Edges die set or another fence die set, you could piece together the fence rather than cutting it as I did.)

3 Stable-Fence cut

The last cutting is to trim one half of the endposts off (See photo). Once the fence is done being cut, glue the wrong sides together to form a sturdy fence. I used distress inks to color the fence.

4 Stable-Fence endpost

The stable doors are sized to fit the Karen Burniston horse die. I cut three horses and decorated them differently using a black fine tipped pen and watercolor pencils. (Watch the assembly video for decoration ideas and tips). The doors are loosely based of the retired Stampin’ Up barn door set. I cut pieces of woodgrain paper to form the trim pieces and glued. The sliding door hardware is from the Stampin’Up set. Because the door is smaller than the die set door, I had to do a modified cutting of the slots that the door slides on.  I followed the door assembly method described in this video by The Creativity Cave.

6 Stable-front-unopened

The sentiments are from the barn door set. You will need to cut two pieces of wood grained paper for the stable at 4 x6 inches. Once you have cut the door slots out of the front piece, and assembled the door, you can adhere the backing piece with the grain sided facing the back side of the front. (The grain will camouflage the slot cuts. Make sure you don’t glue your acetate door mechanism to the backing piece. Test your door before the glue dries if you need to make adjustments. Stamp and cut out your sentiments and adhere behind the doors. Glue one horse head to be peaking out from the stall door and the glue door onto stable.

7 Stable-front-opened

Glue the fence endposts to the front of the stable once the doors and decorations have been added to the front of the stable. Add the horses to your paddock by gluing one to the back of the front fence and the other by using a strip of clear plastic from packaging (It needs to be sturdier than acetate.) to glue the acetate in place, first glue one side the inside of the side fencing. Fold the paddock flat to one side and see where the plastic strip folded tab ends up on the fence and, then glue to that spot.

You can write your personal message on the back of the stable.

Supplies

Stamps/Dies

Inks/Watercolors

Paper

  • Textured 12 x12 off white card stock from my stash
  • All other papers were from my scrap bin

Miscellaneous

Sundae Shop – You’re So Sweet

2 spoons-CUEX

I scream, you scream, we all scream for ice cream! Ice cream sundaes YUMMY! And even better when shared with two spoons. This is a sweet Valentine’s card made for a special couple.

2 spoons-inside

Made this card using die sets from Karen Burniston and lots of recycled colorful packaging from my stash. The shine on the hot fudge topping and cherries is Nuvo Jewel Drops. The “glass” dish is vellum that has been stenciled using the die with a white paint pen.

IMG_7833

The card front is made with papers from Authentique’s Confection Collection.

IMG_7842-cu 2 spoons

See more Valentines by clicking here.

Supplies

Dies:

Papers:

Miscellaneous:

An Old-Time Christmas

1 Parlor-Wide

Queen Victoria and Prince Albert are credited with popularizing the idea that families need evergreen trees adorned with babbles and sweet treats at Christmas.  This fold-out parlor card is in that tradition.

1 Tree CU

Christmas Tree:  The tree frame and pop-up mechanism were made using Karen Burniston’s Christmas tree pop-up die set. I embossed thin copier paper with the saucer die from Karen Burniston’s Cup Pop Stand die set and then cut a circle of cardstock to back it. Using the tabs cutting die from the Christmas tree set, I cut tabs on the embossed saucer to make the tree skirt. Next, I assembled the tree (an assembly video is on the link to die set below) and decorated it using fir branches from the Gemini fireplace accessories pack, ornaments from the Gemini Yuletide treasures die set, and candy canes and gingerbread men from Sara Davis’ Frosty Christmas die set. (The ornaments have glitter glue, Nuvo Drops and Aqua Shimmer on them.) The two star pieces are cut twice from recycled foil from an envelope liner. Once the tree was decorated, it was attached to its brown tree stand and then glued to the tree skirt tabs. Placement on card was based off where the furniture and tree would be when the card was closed.  A portion of the tree skirt was trimmed to fit the card size.

1 Furniture wide

Furniture:  Using Karen Burniston’s Family Room Pop-up die set I altered the style of sofa and changed the chair into a table. I cut the base pop-up mechanism from clear acetate and made the chair arms lower by trimming some of the middle arm piece off and adhere the remaining sides together. Next, I embossed some blue cardstock with an embossing folder by Jennifer Ellory to create brocade fabric for the sofa. I used the sofa seat/back piece to cut the basic shape and then trimmed and added an additional sofa back piece cut from Olga Direktorenko’s Elegant Room sofa die. I made my own template for the brown base and legs of the sofa trying to mimic an empire style settee. A separate back sofa piece was also cut with the Elegant Room die. The Family Room die set has the cushions die and pop-out mechanism on the sofa seat. The tea table was created using the table die from the Elegant Room die set and a Spellbinder’s scalloped circle die for the tabletop. The plate was cut using Courtney Chilston’s Birthday Shadow box die set and the candy cane and gingerbread man were made as describe in the tree section above. Placement on card was based off where the furniture and tree would be when the card was closed.

Fireplace:  Using a recycled greeting card back in an off-white, cut the fireplace out using the Gemini Fireplace Concept die set. Because the die is designed to pop-up from a folded card, I had to cut the fireplace out with tabs at the back edge of mantle and the floor of the fireplace. I I also cut the trim pieces from the same card back and glued the pieces in place after scoring the tab folds. I also cut a rectangular piece of black cardstock to become the back of the fireplace. Taping the bottom of the black back to the floor tab. I cut two brick pattern pieces from the Gemini Yuletide Treasures die set and then I glued them to the black back piece and created smoke and soot on the brick by rubbing a Tim Holtz Distress Crayon over the bricks. The fire and logs were cut from the Gemini Fireplace Accessories Pack. The flames were cut from cardstock that I had blended two colors of Spectrum Noir Sparkle Glitter Ink on, let dry and then cut. The logs and flames were glued together and then placed in fireplace with foam squares.

1 fireplace decorated

Wallcovering:  The wallcovering was created using two embossing folders by Olga Direktorenko. The main piece with pillars and molding is the Elegant Room folder and the crown molding is from the Timeless Room folder. I masked the molding and rubbed Distress Ink over the wallpaper. The mirror (cut from recycle mirror card from a box) wreath, bows, holly and coal shuttle were also cut using the Fireplace Accessory Pack. The embossed “wings” on each side are from the Timeless Room embossing folder.

1 Front Door

Door: The Front of the folded-up card is an elegant Italianate styled door. I used Olga Direktorenko’s entire Elegant Door die and embossing folder set. The windows are wax paper over pale yellow card stock and red marker. The door hardware is cut from gold foil cardstock and gold gel pen. The wreaths were cut from recycled boxes using lawn Fawn’s mini wreath die set.

1 Greeting wngs folded

Greeting: The greeting is on the front of the second folded-side of this tri-fold card. Merry Christmas is cut from recycled red foil envelop liner using a Card Deco Essentials die. The gold lacy background was cut from foil card using Spellbinders Charming Christmas Boughs die set. The greeting is offset to left to allow room for a personal message.

1 Parlor close up

Supplies

Dies:

Embossing Folders:

Stamps & Inks:

Papers:

Miscellaneous:

Ride the Birthday Train

train ride- inside

Get on board the Birthday Train!  This was my first attempt at using Karen Burniston’s Train Pivot Panels and companion Train Elements.  Having made other of KB’s pivot panels I found it an easy assembly. (If you haven’t made a pivot panel card before, please look at her assembly videos.)

train ride- front

I used bright primary colors for the card using lots of scraps bits for the words and tiny decoration pieces. “Enjoy” and “ride” are double cut from red and blue papers and off-set to give a shadow effect.  The card base is from Karen Burniston’s Circle Tag Book Pop-up.  The red grosgrain ribbon hides the tiny portion of train’s “cow catcher” and tracks that show beyond the rounded edge.

train ride- inside wide

Two pearl-like domed dots were used for the railroad crossing sign.(I removed these dots and replaced with red circles of cardstock when I sent the card to a two year old because of the fear he would try to eat them.) Bears are from KB’s Winter Animals die set.

Watch a Video of card

SUPPLIES USED:

Dies

Paper:

  • Cardstock scraps from my stash including black glitter cardstock for wheels

Miscellaneous:

Autumn Blessings

thanksgiving front

Autumn in much of North America is characterized by the browning, yellowing and sometimes reddening of leaves. The muted, earthy tones are part of the season.  Inspired by the “over the river and through the woods to Grandmother’s house we go” tune and by a Karen Burniston video on double pivot panel card, I made this Thanksgiving card.

To see video of this card, click here.

thanksgiving back

The card is designed to be displayed open. The personalized message can be written on the back cover.

thanksgiving inside

To see video of this card, click here.

SUPPLIES USED:

Dies

Paper:

 

Miscellaneous:

Spooky Halloween

Spooky-front

Bats and potions and spiders, Eeeck! It must be the Halloween season.

Spooky-inside

This card was created using Karen Burniston’s Circle Tag Book Pop-Up die set and Halloween stamp sets by American Crafts, and papers by DCWV.

My inspiration for this card came when I found the three stamp sets at my local Tuesday Morning Store. I had been looking for a set of “potion bottle” stamps that wouldn’t cost an arm and a leg to own. At $2.99 a set, I got three sets which all had a copyright date of 2019, but I haven’t been able to find on Google yet.  Their packaging calls the three sets:  After Dark, Midnight Haunting, and Bootiful Night.

Spooky-back

On the back of the tag book card is a computer generated message. The spider ribbon is from Target, but it has been in my craft stash for some years.

SUPPLIES USED:

Dies

Stamps

Paper

Miscellaneous

12 Days of Christmas Trees – Bonus Day

img_7189

I could not forget those who celebrate Christmas in the warmer climates. (Yes, Karen Burniston has a die for this one too!)

img_7187

Using the Palm Tree Pop-up die set, heavy kraft paper, baker’s twine and vintage Mrs. Grossman’s Christmas light stickers, this card comes together. The sand is a brown fine tip marker. The vintage postcards are free from copyright.

img_7195

See all the of the 12 Days of Christmas Trees by clicking on one below.

Day 1 – Give Joy -Plaid

Day 2 – Home for the Holidays-Village

Day 3 – Holly Joy

Day 4 – Snowy Day

Day 5 – Give Joy – Holly

Day 6 – Gingerbread Joy

Day 7 – Home for the Holidays-Joy to the World

Day 8 – Nutcracker Greetings

Day 9 – Plaid Joy

Day 10 – Home for the Holidays-Let It Snow

Day 11 – White Christmas

Day 12 – Home for the Holidays-Peace and Joy

Bonus Day – Topical Christmas

SUPPLIES USED:

Dies

Stamps & Ink (on envelope)

Paper/Stickers

Miscellaneous

  • Tombow Multi Mono Liquid Glue
  • ½ inch white double-sided tear tape
  • Baker’s Twine orange/yellow

12 Days of Christmas Trees – Day 12

Each day for 12 days, I have been showing card variations made with Karen Burniston’s Christmas Tree Pop-up die.  I recommend watching her assembly video before attempting to cut and assemble the pop-up tree.

For all of these cards I started with an A7 size card base (10 x 6 ½ inches), but because my die cutting machine can only accommodate 6-inch-wide pieces of paper, I had to trim the cards down to 10 x 6 inches.

Day 12 – Home for the Holidays-Peace and Joy

HFH-Peace-Inside

Using a paper collection kit makes inspiration and color matching easy and gives you the finished, color-coordinated cards that you might find in a high-end boutique shop.

I used the Echo Park Home for the Holidays Collection Kit by Alisha Gordon for this card. You can cut a 12 x 12 inch sheet into two 10 x 6 inch card bases (Ornaments #HFH73006). From a second sheet of 12 x 12 paper (Holiday Swirl #HFH73003) you will cut four sets of the tall center tree pieces and four of the smaller side trees. (I cut the paper into three strips – two strips wide enough for the center trees – folding these strips over to be able to double cut the large center trees.) by double cutting you have perfectly matched front and back for the center two sections. Glue them together.  This adds strength and ensures the tree is green from all angles of viewing. The star atop the tree is the only paper not contained in the kit. It is a holographic paper, cut twice for each piece, so the star can be seen as gold sparkles from all angles.

HFH-Peace-Front

I used one of the smaller topper with the ornament and decorated it with scraps from the inside tree cuttings and a white gel pen to write “PEACE” on the banner. The tree stand mechanism hole is piece patched. (See if you can find it?)

HFH-Peace-Inside-CU

Inside, stickers are used for decoration along with the tree itself.

See all the of the 12 Days of Christmas Trees by clicking on one below. Don’t miss tomorrow’s Bonus Day post!

Day 1 – Give Joy -Plaid

Day 2 – Home for the Holidays-Village

Day 3 – Holly Joy

Day 4 – Snowy Day

Day 5 – Give Joy – Holly

Day 6 – Gingerbread Joy

Day 7 – Home for the Holidays-Joy to the World

Day 8 – Nutcracker Greetings

Day 9 – Plaid Joy

Day 10 – Home for the Holidays-Let It Snow

Day 11 – White Christmas

Day 12 – Home for the Holidays-Peace and Joy

Bonus Day – Tropical Christmas

Click Here for video of all 12 trees

SUPPLIES USED:

Dies

Stamps & Ink (on envelope)

Paper

Miscellaneous

12 Days of Christmas Trees – Day 11

Each day for 12 days, I have been showing card variations made with Karen Burniston’s Christmas Tree Pop-up die.  I recommend watching her assembly video before attempting to cut and assemble the pop-up tree.

For all of these cards I started with an A7 size card base (10 x 6 ½ inches), but because my die cutting machine can only accommodate 6-inch-wide pieces of paper, I had to trim the cards down to 10 x 6 inches.

Day 11 – White Christmas

White Christmas front

This card was inspired by my memories of the movie “White Christmas” with Bing Crosby and Rosemary Clooney and Danny Kaye (Yes, I had to look that one up and sure it wasn’t Bob Hope.) Every time I watch it, I keep wishing it would snow during certain scenes, but (SPOILER ALERT) it doesn’t really snow until the end of the last scene.

So this card is bit like the old inn with it’s wooden rustic floors, cold New England nights, and a bit sentimental. The tree may have the allusion of blurred tiny lights, but it is really a Bo Bunny paper of succulent plants.

White Christmas inside

For the embossed tree skirt, used an older Karen Burniston die set from her Elizabeth Craft Designs time called Cup Pop Stand. I embossed the card base and then cut the circle in the wood grained paper (from the same Bo Bunny Garden Party Collection as the succulent paper). The die cut “Merry Christmas” and tree squiggles on the front of the card are also cut from the succulent paper. The mittens sticker and the front sentiment topper came from the Echo Park Home for the Holidays Collection.

White Christmas inside cu

Read the past posts of the 12 Days of Christmas Trees by clicking below on the list. Don’t miss the 12th post tomorrow.

Day 1 – Give Joy -Plaid

Day 2 – Home for the Holidays-Village

Day 3 – Holly Joy

Day 4 – Snowy Day

Day 5 – Give Joy – Holly

Day 6 – Gingerbread Joy

Day 7 – Home for the Holidays-Joy to the World

Day 8 – Nutcracker Greetings

Day 9 – Plaid Joy

Day 10 – Home for the Holidays-Let It Snow

Day 11 – White Christmas

Day 12 – Home for the Holidays-Peace and Joy

Bonus Day – Tropical Christmas

Click Here for video of all 12 trees

SUPPLIES USED:

Dies

Stamps & Ink (on envelope)

Paper

Miscellaneous