Keep the Home Fires Burning

Coming home to a house glowing warm with the smell of wood smoke in the air. What more could one want for the holidays? This card is the fourth house card in my series of “A Week of Christmas Houses” using Poppy Stamps 2020 Winter House Pop-Up Easel die set.

Blue house Slider-side

The card is a slight deviation from the die set’s easel card. This card uses a DIY slider base with the ribbon smoke and chimney as the pull tab. The house still is an easel card, but one that is operated by a slider tab. (A good video on DIY slider easel cards is by Maggi Harding.)

The house is cut from heavy card stock in a pale blue that has been in my stash from a card kit. The dark blue and pale yellow come from monotone color packs of cardstock by Recollections. Note that there is a pale-yellow outline layer of the house that provides the window inside color as well as framing the outside edge of the house. The card base is cut from heavy weight white cardstock and white glitter paper.

This card goes together easily by looking at the photos on the Poppy Stamps packaging. It does involve a lot of die cutting as there is only one die of each window type.  (I cut lots of the small pieces and store the extras in a tiny plastic bags that I keep with the die set.) To add depth to the porch and dormer windows I cut those pieces twice and glued together. The snowy pieces are cut from glitter paper and some of the window frames and siding have Nuvo Glitter Drops used thinly to give the illusion of melted snow.

I masked off the front door with sticky notes and used Salty Ocean Distress ink to darken the door and frame. A tiny drop of gold Nuvo Crystal Drops for the doorknob and a wreath cut with a Tonic Studios die set, complete the door.

Blue house Slider-welcome mat CU

The welcome mat was stamped and heat embossed using a stamp from a retired Stampin’ Up set. I used a blend of Ranger Black Sparkle and Recollections Ebony Detail Embossing powders that give the welcome mat a snowy sparkle. Once heat embossed, the mat was weathered using Antique Linen Distress Ink on a sponge dauber and cut out with the coordinating die. Foam tape was used to adhere the mat to the sliding tab.

The windows all have a piece of pale blue organza ribbon taped behind the window frames to give the shine of glass and the rosy glow comes from some shading with Fossilized Amber Distress Ink on the pale-yellow cardstock. The boy and woman decorating a Christmas trees that can be seen in the windows are from an older Tonic Studios Toy Emporium die set. Also, from the Tonic set is the outside fir tree and door wreath.

Blue house Slider-chimney CU

The slider tab was first embossed using a brick stencil (See video by The Paper Boutique on dry embossing with stencils) and then inked with Fired Brick Distress Ink. To make the mortar lines standout, I used a white gel pen. I cut the chimney extra-long so I could fold it over and strengthen the pub tab and so I could punch a hole to thread the ribbon through and secure it to the back side.

Blue house Slider-pull tab CU

The “Season’s Greetings” was stamped in red and is revealed when the chimney tab is pulled up. A personal message can be written below the “From our home to yours” heat embossed sentiment on the tab below the chimney.  These stamps are from the Winter Woodland stamp set by Sheena Douglas. (NOTE: I would recommend stamping the revealed sentiments before assembling the card. I tried to do mine after assembling the slider and it was impossible to get a good enough impression to heat embossing the Season’s Greetings using a stamping platform.)

IMG_8568

I used another stamp from the Winter Woodland set on the envelope flap to give a hint about the chimney pull on the card.

See the more the series of “A Week of Christmas Houses”

Day 1 – From Our House to Your House

Day 2 – Santa is Coming

Day 3 – A Baby is Coming

Day 4 – Keep the Home Fires Burning

Day 5 – Red Four Square

Day 6 – Santa Delivers to the Tropics

Day 7 – House Luminary

2019 – 12 Days of Christmas Trees

Supplies

Dies/Stencils

Stamps

Paper

Ink/Embossing Powder

Miscellaneous

A Baby is Coming

Baby is coming-Front envelope

Who doesn’t look forward to welcoming a new baby at Christmas? This card is the third house card in my series of “A Week of Christmas Houses” using Poppy Stamps 2020 Winter House Pop-Up Easel die set.

The house is cut from heavy card stock in a pale blue that has been in my stash from a card kit. The dark blue and pale yellow come from monotone color packs of cardstock by Recollections. Note that there is a pale-yellow outline layer of the house that provides the window inside color as well as framing the outside edge of the house. The card base is cut from heavy weight white cardstock.

This card goes together easily by looking at the photos on the Poppy Stamps packaging. It does involve a lot of die cutting as there is only one die of each window type.  (I cut lots of the small pieces and store the extras in a tiny plastic bags that I keep with the die set.) To add depth to the porch and dormer windows I cut those pieces twice and glued together. The snowy pieces are cut from glitter paper and some of the window frames and siding have Nuvo Glitter Drops used thinly to give the illusion of melted snow.

Baby is coming-Front open

I masked off the front door with sticky notes and used Salty Ocean Distress ink to darken the door and frame. A tiny drop of gold Nuvo Crystal Drops for the doorknob and a wreath cut with a Tonic Studios die set, complete the door.

The welcome mat, which acts as the easel stop, was stamped and heat embossed using a stamp from a retired Stampin’ Up set. I used a blend of Ranger Black Sparkle and Recollections Ebony Detail Embossing powders that give the welcome mat a snowy sparkle. Once heat embossed, the mat was weathered using Antique Linen Distress Ink on a sponge dauber and cut out with the coordinating die. Foam pads where used to adhere the mat to card and make it tall enough to act as an easel stop.

The windows all have a piece of pale blue organza ribbon taped behind the window frames to give the shine of glass and the rosy glow comes from some shading with Fossilized Amber Distress Ink on the pale-yellow cardstock. The rocking horse and woman decorating a Christmas tree that can be seen in the windows are from an older Tonic Studios Toy Emporium die set. Also from the Tonic set is the outside fir tree.

The ”Merry Christmas” is cut from heavy black cardstock glued down.  A personal message can be written behind the house

Baby is coming-Front envelope

I used two stamps on the envelope flap. I stamped Joy in green and then masked it with a sticky note and stamped the wishing you circle (which has a different sentiment in its center) in blue.

See the more the series of “A Week of Christmas Houses”

Day 1 – From Our House to Your House

Day 2 – Santa is Coming

Day 3 – A Baby is Coming

Day 4 – Keep the Home Fires Burning

Day 5 – Red Four Square

Day 6 – Santa Delivers to the Tropics

Day 7 – House Luminary

2019 – 12 Days of Christmas Trees

Supplies

Dies

Stamps

Paper

Ink/Embossing Powder

Miscellaneous

Santa is Coming Tonight

Santa is coming-open-wide

It’s Christmas Eve and the candles are lit in the windows to welcome Santa. This is the second house card in my series of “A Week of Christmas Houses” using Poppy Stamps 2020 Winter House Pop-Up Easel die set.

The house goes together easily by looking at the photos on the Poppy Stamps packaging. It does involve a lot of die cutting as there is only one die of each window type.  (I cut lots of the small pieces and store the extras in a tiny plastic bags that I keep with the die set.) To add depth to the porch and dormer windows I cut those pieces twice and glued together. The snowy pieces are cut from glitter paper and some of the window frames and siding have Nuvo Glitter Drops used thinly to give the illusion of melted snow.

Santa is coming-Side view

Papers Used: The house is cut from Bazzill heavy card stock in a 2014 color of Gold Coin. The dark blue, red and pale yellow come from monotone color packs of cardstock by Recollections. Note that there is a dark blue outline layer of the house that provides the window inside color as well as framing the outside edge of the house.

Santa is coming-inking door

I masked off the front door with sticky notes and used Walnut Stain Distress ink to darken the door and frame. A tiny drop of gold Nuvo Crystal Drops for the doorknob (which wasn’t put on yet in the photo) and a wreath made from green scraps and a piece of red embroidery floss, complete the door. Greenery was cut from food boxes to get the thickness using a greenery die by Christina Griffiths and snipped into smaller pieces and glued to a wreath shape cut freehand.

Santa is coming-windows-CU

The windows all have tiny white candles cut from a thin white scrap and flames are cut from an orange envelope in my stash. I used the appropriately  named CandlelightSpectrum Noir Sparkle Glitter Ink to put a dot of glow behind each candle on the dark blue layer.

Santa is coming-Candles

I stamped Santa Sleigh on white cardstock and colored with colored pencils. I cut a strip of clear plastic packaging to sandwich between Santa and another piece of white cardstock. Before I glued the strip, laid-out the position of the house, Santa and the plastic strip on a slimline envelope to make sure all would fit inside the envelope.

Santa is coming-laying out

Other than having to trim a bit off each side of the eaves on the white card base, all fit.

Santa is coming-triming card base

I made pencil marks to note where the plastic would go on the backsides of the dark blue layer and Santa. The plastic is sandwiched between the blue layer of the house and the white card base layers.

Santa is coming-Santa gluing

The welcome mat, which acts as the easel stop, was stamped and heat embossed using a stamp from a retired Stampin’ Up set. I used a blend of Ranger Black Sparkle and Recollections Ebony Detail Embossing powders that give the welcome mat a snowy sparkle. Once heat embossed, the mat was weathered using Antique Linen Distress Ink on a sponge dauber and cut out with the coordinating die. Foam pads where used to adhere the mat to card and make it tall enough to act as an easel stop.

The ”Merry Christmas” is cut from heavy black cardstock glued down.  A personal message can be written behind the house

The envelope was stamped in read on cream envelope using vintage Disney stamps.

Santa is coming-card-envelope

See the more the series of “A Week of Christmas Houses”

Day 1 – From Our House to Your House

Day 2 – Santa is Coming

Day 3 – A Baby is Coming

Day 4 – Keep the Home Fires Burning

Day 5 – Red Four Square

Day 6 – Santa Delivers to the Tropics

Day 7 – House Luminary

2019 – 12 Days of Christmas Trees

Supplies

Dies

Stamps

Paper

Ink/Embossing Powder

Miscellaneous

From Our House to Your House

Snowy house -house CU

It’s a cold and blustery day where snow is covering everything. You’ve walked to your neighbor’s house down the lane to drop off a bit of Christmas cheer and now you’re walking back to your home all aglow in the afternoon sun. How lovely and welcoming it looks with its bright paint underneath all the snow.

This is the feeling I hope the recipient of this card will have when they open and display the card.

Snowy house -front

This is the first house card in my series of “A Week of Christmas Houses” using Poppy Stamps 2020 Winter House Pop-Up Easel die set.

The card goes together easily by looking at the photos on the Poppy Stamps packaging. It does involve a lot of die cutting as there is only one die of each window type.  (I cut lots of the small pieces and store the extras in a tiny plastic bags that I keep with the die set.) To add depth to the porch and dormer windows I cut those pieces twice and glued together. The snowy pieces are cut from glitter paper and some of the window frames and siding have Nuvo Glitter Drops used thinly to give the illusion of melted snow.

Snowy house -easel

I masked off the front door with sticky notes and used Walnut Stain Distress ink to darken the door and frame. A tiny drop of gold Nuvo Crystal Drops for the doorknob and a wreath made from green scraps and a piece of red embroidery floss, complete the door. Greenery was cut from food boxes to get the thickness using a greenery die by Christina Griffiths and snipped into smaller pieces and glued to a wreath shape cut freehand.

Snowy house -door CU

The welcome mat, which acts as the easel stop, was stamped and heat embossed using a stamp from a retired Stampin’ Up set. Once heat embossed, it was weathered using Antique Linen Distress Ink on a sponge dauber.

The windows all have a piece of peach organza ribbon taped behind the window frames to give the shine of glass and the rosy glow of sunlight.

The ”Merry Christmas” is cut from heavy black cardstock glued down.  A personal message can be written behind the house.

Snowy house -inside

The house is cut from Bazzill heavy card stock in a 2014 color of Gold Coin. The red and pale yellow come from monotone color packs of cardstock by Recollections. Note that there is a pale-yellow outline layer of the house that provides the window inside color as well as framing the outside edge of the house.

See the more the series of “A Week of Christmas Houses”

Day 1 – From Our House to Your House

Day 2 – Santa is Coming

Day 3 – A Baby is Coming

Day 4 – Keep the Home Fires Burning

Day 5 – Red Four Square

Day 6 – Santa Delivers to the Tropics

Day 7 – House Luminary

2019 – 12 Days of Christmas Trees

Supplies

Dies

Stamps

  • Stampin’ Up – At Home with You – stamps & die set 143681 (Retired)

Paper

Ink/Embossing Powder

Miscellaneous

The Rainy Season

Frogs and Splashes

Where I live it gets so hot and humid that in the summer, that it just has to rain for a few minutes to get it out of its system. Sometimes it even rains with the sun shining.

This card was made as a test of my new die called “Splashing Puddles” by Memory Box. It reminded me of the light rain and the tree frogs chanting.

I began with a stripe printed card as the base. I die cut the puddles and placed washi tape on the back of the raindrops and then sprinkled blue glitter on the front sticky side to make them sparkle. The frogs I had left over from another card, so added them hopping about in the rain. The “Hi” sentiment I picked because it was tiny and seemed to fit into the design best. I spotted it with the tips of markers just as I had colored the frogs but tried to match the raindrops in color. The final touch was some gold foiled washi tape I found in my stash.

Hope the card brings a smile to you.

 

Materials

Dies:

Papers:

  • DCWV – Strips Box of Cards – 40 A2 Printed Textured Cards & Envelops
  • Pale blue cardstock from my stash

Inks:

Miscellaneous:

  • PVA Glue – Cosmic Shimmer Acrylic Glue
  • Washi Tape from my stash
  • Non-toxic Sparkling Glitter by Advantus Corp – Blue Mix – SUL54634

Potted Flowers Greetings

IMG_5805

A colorful archway of potted plants looking into shaded shelves of plants. What could be more inviting on a hot summer’s day than the cool retreat into a shaded, colorful paradise?

The shadow frames were die cut using the three rectangles from Sizzix’s Courtney Chilston’s Birthday Shadow Box Thinlits set from a set of blue cardstock that progressively gets darker as it goes backwards, just as the light and shades would looking through a doorway on a sunny day.

IMG_5807

This card was created using Poppy Stamps’ Spring Pots Shelves, Spring Pots Frame and Tiny Frogs dies. Two full die cuts were made from each of the pots dies – one in white/cream cardstock and one in green. The green die cuts had the rectangular frame cut away from the vine on the frame and the green shelves had the two shelves separated.  Using colorful scrapes, additional dies cuts were made of pots and flower blooms.  (Hint: Use wax paper over these intricate dies. They will peel off from the back side of the cardstock and take many of the tiny dots and squiggles with them as you peel. Use a poking tool for the rest.)

IMG_5806

The green die cuts were glued onto the white/cream die cuts and the colorful pots and blooms were glued down.  Using some scrap brown kraft-paper, two narrow strips were cut and glued over the separated pots to form two new shelves that were a quarter of an inch longer on each side.

Stampin’ Up’s “Hello There” stamp and coordinating corner stamp complete the front of the card.  (I suggest stamping first before assembling the card.)  The inside sentiment is die cut from a Karen Burniston Word set.

IMG_5804

Foam tape was used between the four layers placing the tape near the cut out rectangle so that foam layers are not directly above each other so that the card will meet the .25” maximum thickness of U.S. Postal Service.

IMG_5803

SUPPLIES USED:

Dies

Poppy Stamps 2174-Spring Pots Shelves

Poppy Stamps 2173 Spring Pots Frame

Poppy Stamps 1781 Tiny Frogs

Sizzix 663581 Courtney Chilston’s Birthday Shadow Box

Karen Burniston in cahoots with Riley & Co. 1002 Word Set 1- Greetings

 

Stamps:

Stampin’Up 147464 Around The Corner

 

Miscellaneous:

Wax Paper

Scotch Foam Tape

Tombow Aqua Mono Liquid Glue

Crayola Signature Brush & Detail Dual-ended Markers