Sometimes spending a holiday alone in a place far from home means that one must adapt and make new traditions, friends and feasts.
This penta-fold aperture card opens out to form a park scene complete with a water fountain and squirrels sharing acorns. Karen Burniston dies are used for all but the 4 inch square apertures.
Card base: Cut four pieces of heavy weight cardstock 6 inches x 6 ¼ inches and one piece 6 inches by 3 inches. Score and fold all the 6 ¼ inches sides at ¼ inch to form tabs.
Adhere decorative papers to the front and back of two of the tabbed squares. (I used double-sided tape at the outer edges of paper.) Center a 4-inch square die over the patterned paper and secure with removable tape. (Remember if you are using different papers for the inside and outside of your card to test that you have the papers on the correct sides of your tabbed card base panels before you cut the apertures.)
Glue the aperture side panels to the 6-inch sides of the back panel whose tab is glued to the floor panel. The floor panel’s tab is glued to the 6-inch side of the 6 inch x 3inch piece. Adhere decorative paper onto all panels on the card base.
Trees: Cut four tree trunks using Tree Pop-Up die set. Cut four leaves dies. Glue trunks to leaves. Use a fence piece to position each tree trunk on the sides of the apertures, gluing the overlapping leaves together in the aperture opening. Repeat all steps for other aperture panel.
Fence: Cut ten fence panels from the Iron Fence Pop-Up die set. (I cut twelve fence piece incase I made a mistake in cutting, which I did.) Trim five fence panels at the sixth post from the left. Trim the remaining fence panels at the sixth post from the right. Trim off sixth post tip and scrolls at the right of post on left panel as shown in photo. Glue right panel over left panel. Take one elongated fence panel and adhere to the back panel. Glue fences over aperture panels front and back matching up fence tips.
Bench: Stamp with woodgrain stamp onto brown kraft card stock and heat emboss with white embossing powder.
Die cut one whole bench using the Garden Bench Pop-Up die set. Cut the seat section again with the woodgrain going with the seat planks. Save two of the scrolling out-cuts from the bench back to glue onto the front of bench arms. Glue seat onto bench matching up planks. Follow package directions to attach the bench to the back and floor panels.
Fountain: Cut one of each of the two pieces of tree trunk from Tiny Trees Pop-Up die set of blue card stock. Cut tree base from gray card stock. Cut two sets of rocks from Tent Pop Up die set.
Assemble tree as per package directions. Trim the tips of branches off
Trim two colors of mylar foil into 1/8 inch wide strips. (I used the Spellbinders Quick Trimmer) Glue two color strips to each side of the trimmed tree trunk.
Cut a circle of blue foil and glue to fold made by the floor panel and the 6×3 inch panel. Cover edges with gray rocks. Attach the tiny tree foundation per directions on package.
Squirrels: Cut two squirrels and the tummy fur from two different colors. Cut two acorns from a light brown and two acorn tops from a dark brown. Assemble squirrels and acorns per package directions. Cut one of the long pop-up platforms from the bench pop-up die set. Attach to bench per directions on package. Glue squirrel to platform.
Sentiments: “autumn colors”, “happy autumn” , “Happy Thanksgiving” and “Thinking of you” are sentiments from two of Karen Burniston Word die sets – Greetings and Autumn Word Set.
Thank you for reading. If you enjoyed this blog post, please like it and follow the blog. 😊
Other Bench Cards
- Karen Burniston – Dies – Woodland Animals – 1001
- Karen Burniston – Dies – Greetings – 1002
- Karen Burniston – Dies – Tree Pop-Up – 1005
- Karen Burniston – Dies – Tent Pop Up – 1048
- Karen Burniston – Dies – Autumn Word Set – 1060
- Karen Burniston – Dies – Tiny Trees Pop-Up – 1156
- Karen Burniston – Dies – Garden Bench Pop-Up – 1170
- Karen Burniston – Dies – Iron Fence Pop-Up – 1172
- Spellbinders – Dies – Essential Squares – S4-1037
Stamps & Heat Embossing
- VersaMark – Watermark Stamp Pad
- Stampin’ Pad – Rubber Stamp – Hardwood
- Recollections – Detail Embossing Powder – Snow
- Heavy weight white card stock
- The Paper Studio – traditions Floral paisley – 112094
- Authentique – Pioneer Plaid – THA005
- Brown kraft cardstock
- Colored cardstock and specialty paper scraps from my stash
- Cosmic Shimmer – Specialist Acrylic Glue – 125ml
- Sizzix – Big Shot PLUS die cutting Machine
- Fineline 20 Gauge Applicator & Bottle
- Gelly Roll Pens – Black – Set of 3
- Spellbinders – Glimmer Foil – Moondust and Silver
- Spellbinders – Quick Trimmer
3 thoughts on “An Autumn Day in the Park”
Oh my goodness…the work you put into a card. So many beautiful details. I love those little squirrels. Great job…and your step-by-steps are amazing. Thank you!
LikeLiked by 1 person
WONDERFUL !!! Thank you so much for sharing not only the unique card, but HOW to make it.
LikeLiked by 1 person
Such a stunning pop up card Sue. Thank you for your very detailed and easy to follow instructions. Debs 😘
LikeLiked by 1 person