Flowers

Flowery Thanks

| ullycatdesigns

Iris, cosmos and cornflowers stitched around a golden “THANKS” makes for a simple, but heartfelt thank you.

I used another stitched flower die from Spellbinders, this time the Small Die of the Month for April 2021. The die comes with separate letters to die cut the word “THANKS” as well as the larger background die cut with stitching holes.  Using very heavy pale blue cardstock, I die-cut the large piece to be stitched. I had a piece of junk mail that had large sections of matte gold and I die-cut the letters from that.

The larger flower petals and leaves were outline or chain stitched before filling in the centers of them using three strands of floss. The yellow stamens are French knots. While I knotted the floss ends when starting, I finished the flowers on the back side by adding dots of glue to seal the thread ends and add dimension to the stitched frame.

After gluing the gold letters on the front of the stitched piece, I added foam squares with glue to back side of the stitched piece behind the letters and attached to the front of the card base. The card base is an 8 x8 inches sheet of heavy white card stock folded in half using a scoring board.

If you enjoyed this stitched card, there are two more stitched card posts this week as well as pervious stitched cards:

Thank you for reading this blog post. Please like and leave comments 😊

Materials Used:

Dies

Papers

  • Scrap heavy blue and matte gold cardstock
  • 8 x8 inch heavy weight white cardstock

Miscellaneous

  • Blues, purples and green embroidery floss
  • Large eyed needle
  • Foam squares
  • Scoring board and tool

Stitched Flowers for a Spring Birthday

| ullycatdesigns

Luscious purple, blue and lavender flowers, stitched with shiny embroidery floss hoovering over a raised matte gold Happy Birthday make for a simple yet elegant card.

I used a stitched flower die from Spellbinders that originally was part of their Large Die of the Month Club but is now available to everyone via their on-line shop. Initially I die-cut into an 8.5 x 5.5 inches sheet of pale blue heavy cardstock that was in my stash. I stitched it completely before trimming it down to the final 4.5 x 5.75 inches to fit on a 5 x 6 inches card base.

The larger flower petals and leaves were outline or chain stitched before filling in the centers of them using three strands of floss. The yellow stamens are French knots. While I knotted the floss ends when starting, I finished the flowers on the back side by adding dots of glue to seal the thread ends and add dimension to the stitched frame.

The Poppy Stamps “Happy Birthday – Poe Script” sentiment was cut three times from a gold piece of junk mail and glued together. The words were glued directly to the card base after determining the placement with the stitched frame. The frame was attached to the card base with thick foam squares.

If you enjoyed this stitched card, there are two more stitched card posts this week as well as pervious stitched cards:

Thank you for reading this blog post. Please like and leave comments 😊

Materials Used:

Dies

Papers

  • Scrap heavy blue and matte gold cardstock
  • A7 white card base and envelope

Miscellaneous

Spring Is In The Air

| ullycatdesigns

Hello, it’s Sue of the Dies R Us Design Team and today we are making a spring time pop-up card for a gardener using Karen Burniston dies.

Cut the two printed papers to 4 15/16 inches x 7 inches. Position them inside the card base so that there is a gap between the papers where the fold can be seen. Using removable tape, tape them together and place the chair die with the nibs over the fold.

Run taped papers with die through die-cutting machine. Cut chair, arms and seat from woodgrain paper. (I aged the chair with white ink pad rubbed over the grain.)

Glue printed papers inside card base, adding matching scraps of papers to cover the brown spaces let where chair is cut away. Fold woodgrain chair folds as shown on packaging. Glue wood grain chair to patterned paper chair matching up the seat, back, arms and leg pieces. Train the chair to pop-up by opening and closing card a few times.

Decorate card with the garden charm set cutting off the charm loops. (I dirtied-up the tools and gloves with brown ink.) The pink flowers are made with the flowers from the Tiny Trees Pop-Up set.

Fold up all the petals on the flowers and then glue a smaller flower on top of a larger flower. Add a yellow Nuvo Drop center to flower. Let dry overnight before gluing on to card.

The front of the card is made with scrap rectangles of green patterned paper with another watering can cut on the back side of the mirror cardstock and rounded with my fingers so that it pours from the left. The sentiment is a also a Karen Burniston die.

Hope this fun card has put a smile on your face and provided some inspiration for your crafting. 😊

See more chair cards below:

Dies from Dies R Us:

Additional Supplies Used:

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Fall Is In The Air

| ullycatdesigns

Hello, it’s Sue of Ully Cat’s World and today we are making an autumn birthday pop-up card for a gardener using Karen Burniston dies.

Cut the two printed papers to 4 15/16 inches x 7 inches. Position them inside the card base so that there is a gap between the papers where the fold can be seen. Using removable tape, tape them together and place the chair die with the nibs over the fold.

Run taped papers with die through die-cutting machine.

Glue printed papers inside card base, adding matching scraps of papers to cover the brown spaces let where chair is cut away.

Cut chair, arms and seat from woodgrain paper. (I made my own woodgrain paper using a woodgrain stamp that I heat embossed with watermark ink and clear embossing powder.)

Fold woodgrain chair folds as shown on packaging. Glue wood grain chair to patterned paper chair matching up the seat, back, arms and leg pieces. Train the chair to pop-up by opening and closing card a few times.

Decorate card with the garden charm set cutting off the charm loops. (I dirtied-up the tools and gloves with brown ink.)

The chrysanthemum-like flowers are made with the smallest flower from the Flower Pot Pop-up or Flowers and Bee set cut like fringe around the center circle. Cut two, fringe, push up fringed petals and glue one on top of the other. Glue three flowers onto foliage from charm set. Trim foliage as needed.

Round flowerpots and watering can over a marker or glue bottle. Add oak leaves from Tiny Tree Pop-Up to potted flowers and around card.

Make flowerpots and watering can pop-up taking printed paper cut into strips, fold and glue into squares. Glue pot to square and onto card.

The front of the card is made with a label die and a sentiment from Karen Burniston Word Set 7 – Autumn.

(I used a fine tipped glue bottle to added glue to the die-cut words that worked extremely well. Then I used a fine-tipped brown pen to mark stitches using the die as a stencil.)

Inside, the “Happy Birthday” is another Karen Burniston die that has been colored with Distress Ink. A label die-cut is used for a personal message.

Hope this fun card has put a smile on your face and provided some inspiration for your crafting. 😊

See more chair cards below:

*  Cat In The Window

*  Fall Is In the Air

*  Spring Is In The Air

*  Summer Is In The Air

*  Winter Is In The Air

* Happy Hour at the Beach

Dies from Dies R Us:

Additional Supplies Used:

Don’t forget to come join in the fun at the Dies R Us Challenge Blog. There’s a new challenge theme offered on the 1st and 15th of each month and one lucky randomly drawn winner will receive a gift voucher prize to the Dies R Us Store.  

 For your convenience, all the important Dies R Us links are provided below.

click below for:

STORE

CHALLENGE BLOG

FACEBOOK

INSPIRATION BLOG

FRIENDS OF DIES R US PINTEREST PAGE

Marigold Blessings

| ullycatdesigns

Weddings can be times of great joy. This wedding card inspired by traditions from India is a brightly colored card using a flower mandala as its centerpiece in marigold colors. 

The marigold petals are three die-cut layers using the free die set from Die-cutting Essentials Issue 78. 

To create the card base, I used a 7-inch tall by 12 inches wide piece of double-sided cardstock. The piece is scored and folded at 1 inch, 3 ½ inches, 8 ½ inches and 11 inches.

The inside sentiment was printed digitally onto printable 8 1/2 x 11 inch vellum and adhered with glue dots.

blessings-happy-couple-redDownload

For the final decoration Nuvo drops were added onto the card front and the flower center.

Thank you for reading this blog post. Please like and leave a comment. 😊

Materials Used:

Dies

Stamps

  • Unknown brand cabbage rose clear stamp possibly from an advent calendar box from Craft Stash

Nuvo Drops

  • Vintage Drops – Post Box Red and Yellow Brick Road
  • Crystal Drops – Bright Gold and Red Berry

Papers

  • First Edition 12×12 Storyteller paper pad
  • Printable vellum

Miscellaneous

A Basket of Flowers For Mom

| ullycatdesigns

Mothers deserve special cards. A basket full of roses using Anna Griffin’s new Basket Pop-Up kit and a few tea service pieces from an older Anna Griffin Favorite Tea Embellishments made the perfect card for this special mom.

The envelope was stamped with stamps from Anna Griffin’s Treasury of Stamps and Dies using Stampin’ Up Always Artichoke ink.

Other cards using stamps and papers from Anna Griffin include:

Thank you for looking at my blog. Please like, comment and follow. 🌞

A Spring Basket of Flowers

| ullycatdesigns

Special aunts deserve special cards. A basket full of spring flowers using Anna Griffin’s new Basket Pop-Up kit and a few flowers from an older Anna Griffin Pretty Paintings kit made the perfect card for this special aunt.

The envelope was stamped with stamps from Anna Griffin’s Treasury of Stamps and Dies using Stampin’ Up Soft Suede ink.

Thank you for looking at my blog. Please like, comment and follow. 🌞

Other cards using stamps and papers from Anna Griffin include:

Crafty Friends

| ullycatdesigns

Crafty Friends are fun to have and making special cards for such friends is both challenging and rewarding. This slimline mini-sliders card was made for an animal lover who appreciates interactive cards.

Instead of using my split slider template for this 9 inches x 4 inches card, I hand drew the five mini sliders and cut using a craft knife and metal ruler. (I miss cut and ended up having to reinforce the narrow bars between the sliders with additional patterned cardstock bars.) The coated Dress My Craft patterned cardstock was my last sheet of this vintage leafy print, so I had to make the slider panel work. Assembly is very similar to the assembly of the split slider template.

The foliage and floral dies used to decorate are a mishmash of dies from my collection. The elephant is one that I had assembled when I made another elephant card.

The foiled sentiment strip is one I had made during batch foiling session a while back. I used a die from a different Glimmer plate set to die cut the decorative scalloped edges.

Scraps of holographic ribbon were added between sliders to add some subtle sparkle to the card.

Inside the card I added a vellum strip to hid some tears around the half circle cut for a finger grip on the pull panel. A personal note will be added inside.

I glued 1-inch circles on the two points where the card recipient needs to place their fingers to hold and pull the slider panel up. A CRX instruction sheet is enclosed with the card to explain how to use the card.

Stamped on the back flap of a #10 business sized envelope in blue ink is a small elephant from Bus Cubbies stamp set sitting under the sentiment “Hello Friend” from Hello Friend stamp set.

Thank you for reading this blog post. Please like and leave comments. 😊

If you enjoyed this card, check-out my original Split-Slider Slimline Series:

Day 1 – Split Sea Slider

Day 2 – Cloud Dreams

Day 3 – Triple Hearts

Day 4 – A Valentine for A Baseball Fan

Materials Used:

Dies

Stamps

Inks/Polish

Foiling

Papers

Miscellaneous

© Sue Small-Kreider 2021

The First Sign of Spring – Crocus Tealight

| ullycatdesigns

When the crocus start blooming in their purples and yellows, spring can not be far behind. This tall tealight holder is reminder that spring is coming.

Th intricate die cut is a design by Christina Griffiths of Card Making Magic that was the free gift in Die-cutting Essentials issue 73. The pentagon base is from a Tonic Craft Kit 25. Colored vellum panels behind the die-cut cardstock sides defuse light.

Materials:  Cut two 5 inches x 6 ¾ inches (12.5 cm x 17 cm) rectangles, one 2 ¾ inches x 6 ¾ inches (7 cm x 17 cm) rectangle from heavy white cardstock, and five vellum rectangles 2 ¼ inches x 6 ¼ inches (5.5 cm x 15.75 cm). Die-cut a sixth panel from scrap cardstock to use as a stencil. Die-cut one pentagon from heavy white cardstock.

Die-cut Sides:  Score all three white rectangles along all four sides at ¼ inch (3 cm). On the two larger rectangles score down the center at 2 ½ inches (6.25 cm). Place die centered inside score lines on all five sections and cut. (Hint: Because this an intricate die, you may need to add cardstock shims to get a good sharp cut throughout the die. I rolled the die through three times to cut the thick cardstock.) Using fine tipped scissors or a craft knife and metal ruler, trim off the attached top and bottom pieces of the die-cut.

Vellum Panels:  Tape a vellum panel to the front of the stencil and turn the vellum and stencil over to color the crocus flowers through the stencil onto the backside of the vellum. Once all panels are colored, glue to the back of the die-cut panels. Once glued, touch-up the coloring on the backside of the panel. (Hint: Depending on what type of markers are used to color the vellum, ink can transfer to the white cardstock, so coloring the backside away from the cardstock is best.)

Assembly:  Trim away the squares created by the score lines on the white cardstock pieces and cut the tab corners off as shown in photograph. Fold the two double panel pieces down the center score line and burnish with a folding tool. Fold the five bottom tabs and burnish. Fold and burnish the six long side tabs.

With two of the panels lying flat on your work surface, align the panels and glue the two tabs together. Pinch until the glue sets. Repeat until all but the last set of tabs are glued. Allow glue to dry. Gently fold the glued sides and burnish by pinching the sides together to have crisp folds. Glue the final tabs laying panels flat and reaching in, to pinch tabs until glue sets. Allow glue to dry. Fold and burnish the last corner. Drop pentagon base into center of holder and work under the three seams. Glue tabs to bottom of pentagon.

Add your battery powered tealight. (Note: because this light holder is made from flammable paper, do not use candles with real flames.)

Thank you for reading this blog post. Please like and leave a comment. 😊

Materials Used:

Dies

Colors

Papers

Miscellaneous